Ajay
Lifer
- Jan 8, 2001
- 15,509
- 7,899
- 136
Look at how insane prices for DDR4 are right now!
Smart phones are using DDR-4 now. Yay
Look at how insane prices for DDR4 are right now!
Is that a safe long term voltage setting? I'll try 2900ish and possibly 3200 with 1.375 and see how it goes.
Tried it. The change i can tell is a performance bias setting where you can change from auto to none cb15 aida/geekbench cb11.5.There's a new BIOS for the Asus Prime B350M : https://www.asus.com/Motherboards/PRIME-B350M-A/HelpDesk_Download/
I'm at work so can't test it yet :/
I saw this on my X370-Pro BIOS as well after the update. Any idea what it's supposed to be for?The change i can tell is a performance bias setting where you can change from auto to none cb15 aida/geekbench cb11.5.
Tried it. The change i can tell is a performance bias setting where you can change from auto to none cb15 aida/geekbench cb11.5.
Their clever branch predictor? HmmI saw this on my X370-Pro BIOS as well after the update. Any idea what it's supposed to be for?
I have a 1700No fix for the temp reads?
Seems to be running fine. A couple hiccups, but nothing catastrophic.No response since, did it explode?
Seems to be running fine. A couple hiccups, but nothing catastrophic. This Noctua D15 won't let me use my top PCIe slot, which kind of sucks, but it's not the end of the world. I guess I will be going Vega instead of xfire now though.
I am not particularly happy with the build quality on this enthoo pro m. It's not bad, but I thought it would better. My expectations were probably too high for a case I paid $55 for. That said, I really like the air flow in this thing.
Boot time seems really good on this taichi. Some people were complaining about post times, and I was kind of expecting something similar, but this thing isn't having any issues.
I would take pics, but the camera on my phone is a joke. But it looks really nice, and it's quiet.
According to HWmonitor and Ryzen master, this Ryzen 1700 is at 35.5C @ 1.08125V while doing CPUz Stress Test. This is 100% default settings with the stock bios
I haven't had time to put aida or anything else on here yet.
PS:
I just tried this asrock a tuning utility, and it just keeps popping up "division by zero" error. lol
The first pcie x1.Are you talking about the pcie x1 slot or the x16slot? i'm planning to use 3 GPUs with a NH-D15 cooler on a Taichi board if it's possible.
I guess i have to return my noctua cooler then, do you think the offset on the NH-D15s is enough to make room for the slot?Both. I even had the backplate off of this GPU, and it still wouldn't fit.
I am using the D15S with the Taichi and I am able to use a Powercolor 390 in my top PCIe 16x slot. The 1x slot is also available, but only just. That's in a Rosewill Thor v2 case using two NF-A14 fans and the stock fan on the D15S.
My only "struggle" is that using a Powercolor 390 in 16x slot 1 and an MSI 390 Gaming in 16x slot 2 (8x slot whatever) blocks the 4x PCIe slot at the bottom. So no 3-card mining action on this board unless using risers.
I guess i have to return my noctua cooler then, do you think the offset on the NH-D15s is enough to make room for the slot?
I'm still waiting for my motherboard so i can't check myself.
the distance from the center is 67mm instead of 75 so 0.8cm more space.
I am using the D15S with the Taichi and I am able to use a Powercolor 390 in my top PCIe 16x slot. The 1x slot is also available, but only just. That's in a Rosewill Thor v2 case using two NF-A14 fans and the stock fan on the D15S.
My only "struggle" is that using a Powercolor 390 in 16x slot 1 and an MSI 390 Gaming in 16x slot 2 (8x slot whatever) blocks the 4x PCIe slot at the bottom. So no 3-card mining action on this board unless using risers.
nvm guys, I am an idiot... The USB 3.0 cable to the front IO was in the way.... I was up way too late building this thing.
PRIME B350-PLUS BIOS 0513
1.Improve system performance.
2.Make CPU temperature more precise.
Are you talking about the pcie x1 slot or the x16slot? i'm planning to use 3 GPUs with a NH-D15 cooler on a Taichi board if it's possible.
Not sure if this was noted but the latest HWMonitor from March 23 adds support for Ryzen http://www.cpuid.com/softwares/hwmonitor.html
Not sure if this was noted but the latest HWMonitor from March 23 adds support for Ryzen http://www.cpuid.com/softwares/hwmonitor.html
OK, something odd, and I need help. Went to change my overclock, with less vcore, more speed. Applied from Ryzen master, then it locked up. Rebooted, went into bios, and went back and saved (3.9 ghz, 1.35 vcore) But when windows books, its running at 3.2 ghz. If I run Ryzen master. click on the profile, and apply, it says "sucessfully updated", but it did not say "this requires a reboot" which it should, and its still runnig at 3.2 !!!
Uploading new bios 1.44 and will try that, but please if you have any idea, reply.
I tried that, power unplugged, no change. Uploading the new bios seemed to resolve this.Try to shut down the computer, and start back up, instead of restarting.