Discussion Leading Edge Foundry Node advances (TSMC, Samsung Foundry, Intel) - [2020 - 2025]

[DisEnchantment]

TSMC's N7 EUV is now in its second year of production and N5 is contributing to revenue for TSMC this quarter. N3 is scheduled for 2022 and I believe they have a good chance to reach that target.


N7 performance is more or less understood.


This year and next year TSMC is mainly increasing capacity to meet demands.

AnandTech Forums: Technology, Hardware, Software, and Deals

Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

www.anandtech.com

For Samsung the nodes are basically the same from 7LPP to 4 LPE, they just add incremental scaling boosters while the bulk of the tech is the same.

Samsung is already shipping 7LPP and will ship 6LPP in H2. Hopefully they fix any issues if at all.
They have two more intermediate nodes in between before going to 3GAE, most likely 5LPE will ship next year but for 4LPE it will probably be back to back with 3GAA since 3GAA is a parallel development with 7LPP enhancements.

AnandTech Forums: Technology, Hardware, Software, and Deals

Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

www.anandtech.com

Samsung's 3GAA will go for HVM in 2022 most likely, similar timeframe to TSMC's N3.
There are major differences in how the transistor will be fabricated due to the GAA but density for sure Samsung will be behind N3.
But there might be advantages for Samsung with regards to power and performance, so it may be better suited for some applications.
But for now we don't know how much of this is true and we can only rely on the marketing material.

This year there should be a lot more available wafers due to lack of demand from Smartphone vendors and increased capacity from TSMC and Samsung.
Lots of SoCs which dont need to be top end will be fabbed with N7 or 7LPP/6LPP instead of N5, so there will be lots of wafers around.

Most of the current 7nm designs are far from the advertized density from TSMC and Samsung. There is still potential for density increase compared to currently shipping products.
N5 is going to be the leading foundry node for the next couple of years.

For a lot of fabless companies out there, the processes and capacity available are quite good.

---------------------------------------------------------------------------------------------------------------------------------------------------


FEEL FREE TO CREATE A NEW THREAD FOR 2025+ OUTLOOK, I WILL LINK IT HERE

 

[Doug S]

Company acts surprised pikachu that after almost a decade of lying about their manufacturing progress... people won't believe them even when telling the truth. We used to teach kids about this, read them fables about boys and wolves.

Not really sure what the PR team can do. They aren't really set up to be telling people "yes things are going well with 18A, this isn't like how we lied about 10nm for years and a bunch of times since!" People don't want to hear that from the PR office, they want to hear it from the engineers putting their reputations on the line.

Boeing's PR has the same issues, they aren't the ones you want to tell you that the MCAS fixes are solid. You want to hear that from the engineers - especially if you could hear from the ones who were trying to raise the alarm over the issues in the past and were ignored.

 

[coercitiv]

People don't want to hear that from the PR office, they want to hear it from the engineers putting their reputations on the line.

Don Soltis is one of those engineers, when he held up that chip he expected the audience to understand he's got a reputation to uphold. He's not some random talking head. Here's the catch though, others have burned this bridge before him. Sometimes reputations can be sacrificed.

 

[Hulk]

I don't trust ANYTHING Intel says. Only what is on the shelves.

 

[dangerman1337]

TSMC Accelerates 1.4 nm Plans, Targets 2027 Pilot Runs

TSMC has quietly accelerated the start of construction on a large new complex designed to produce 1.4 nm wafers, ramping up plans for a multi-building site known as Fab 25. The facility, which will be located in the Central Taiwan Science Park near Taichung, is expected to include four...

www.techpowerup.com

Hmmmmm, could AMD be wanting Zen 7 launch sooner than later? If I was them I'd do Zen 7 X3D day 1 and just have Zen 6 in the mean time be more budget orientated with maybe Zen 7 non-X3D months after X3D launching.

 

[511]

TSMC Accelerates 1.4 nm Plans, Targets 2027 Pilot Runs

TSMC has quietly accelerated the start of construction on a large new complex designed to produce 1.4 nm wafers, ramping up plans for a multi-building site known as Fab 25. The facility, which will be located in the Central Taiwan Science Park near Taichung, is expected to include four...

www.techpowerup.com

Hmmmmm, could AMD be wanting Zen 7 launch sooner than later? If I was them I'd do Zen 7 X3D day 1 and just have Zen 6 in the mean time be more budget orientated with maybe Zen 7 non-X3D months after X3D launching.

bruh it's pilot production aka Risk Production which always happens before HVM the timelines have not changed H2 28 is the HVM data

 

[jpiniero]

Doesn't seem like it'd be that much better than A16.

 

[511]

Doesn't seem like it'd be that much better than A16.

It's half node from A16

 

[Doug S]

It's half node from A16

Despite the way it is named, A16 is not a half node. A16 is N2P plus BSPDN. A14 will be a "full node" jump from N2, though today's "full node" is less than what a half node was 10 or 15 years ago, so the distinction has less and less value.

It isn't clear yet what TSMC's plans are for BSPDN in the A14 era. Will it remain optional, if so will there be a different name like A12 for A14+BSPDN or will it be named A14S (A14 Super Power Rail) or something like that to denote? Guess we'll see.

 

[jpiniero]

It isn't clear yet what TSMC's plans are for BSPDN in the A14 era. Will it remain optional, if so will there be a different name like A12 for A14+BSPDN or will it be named A14S (A14 Super Power Rail) or something like that to denote? Guess we'll see.

The slide says they are doing a version of A14 with BSPD in 2029.

 

[511]

Despite the way it is named, A16 is not a half node. A16 is N2P plus BSPDN. A14 will be a "full node" jump from N2, though today's "full node" is less than what a half node was 10 or 15 years ago, so the distinction has less and less value.

I meant the PPA is worth only TSMC Half node.

 

[Win2012R2]

"@hotchipsorg, someone asked if Intel 18A was on track. Don Soltis from $INTC literally held up a Clearwater Forest SoC and basically said “Yes...this was built on 18A. Everything we’re talking about for Clearwater Forest is on 18A... It’s real, or I wouldn’t be here...""

This is evasion really - the question was whether 18A was on track, which existence of working SoC does not prove in itself, what are the real yields, cost of doing one wafer, cost of advanced packaging? If this was any good Intel would have invited folks with high credibility from say SemiAnalysis and show them real current stuff under NDA but allow them to write publicly opinion whether they believe Intel or not, but that ain't happening.

 

[511]

This is evasion really - the question was whether 18A was on track, which existence of working SoC does not prove in itself, what are the real yields, cost of doing one wafer, cost of advanced packaging?

No Foundry shares this publicly

Intel would have invited folks with high credibility from say SemiAnalysis

Semi analysis has been click baiting too much recently

 

[LightningZ71]

That's what reporters get for asking poor questions. There were better, more specific questions to be asked there.

 

[Win2012R2]

No Foundry shares this publicly

1. Other foundries are not in as dire state as Intel (multiplied by their industry weight)

2. This can be shared under NDA, this stuff is supposed to be HVM in what 6 months, so what if some trusted industry figures would review all data and publish their view without stats, what's the problem in that? The only one I see if this true data is shown they won't say things are good, that's the only logical conclusion one might have: therefore 18A is in bad state.

3. I have zero doubt that this data was shared with wanna be customers - they won't trust Intel otherwise, and we know Intel got zero such customers signing up to it.

 

[511]

Other foundries are not in as dire state as Intel (multiplied by their industry weight)

Samsung is in a worse state than Intel

This can be shared under NDA, this stuff is supposed to be HVM in what 6 months, so what if some trusted industry figures would review all data and publish their view without stats, what's the problem in that? The only one I see if this true data is shown they won't say things are good, that's the only logical conclusion one might have: therefore 18A is in bad state.

No one gets this data except for customers so keep dreaming

I have zero doubt that this data was shared with wanna be customers - they won't trust Intel otherwise, and we know Intel got zero such customers signing up to it.

Customer with test chips already have the data I wouldn't be surprised if AMD has 18A yield data .