Originally posted by: Tmsa7966
Are you using the fan controller that comes with the zalman to set you fan speed to the max?
That helps a lot when I overclocked using that same cpu HS
Originally posted by: clarkey01
I have decided to go back to stock (from 3Ghz)
I have the G0 stepping and a Zalman CNPS9500-AT cooling it.
Here are my temps are settings at full load , at stock ;
Temps">http://img509.imageshack.us/img509/8312/testinggt9.jpg</a>
How far do you believe I can go ? is anything too high there ? My temps at stock seem a bit high?
Originally posted by: JPB
Originally posted by: clarkey01
I have decided to go back to stock (from 3Ghz)
I have the G0 stepping and a Zalman CNPS9500-AT cooling it.
Here are my temps are settings at full load , at stock ;
Temps">http://img509.imageshack.us/img509/8312/testinggt9.jpg</a>
How far do you believe I can go ? is anything too high there ? My temps at stock seem a bit high?
Your link does'nt work.
Originally posted by: clarkey01
Originally posted by: Tmsa7966
Are you using the fan controller that comes with the zalman to set you fan speed to the max?
That helps a lot when I overclocked using that same cpu HS
No mate, where is this option , bios I pressume ?
Originally posted by: Gillbot
3.6-4.0 on a Q6600 is NOT the norm for overclocks.
Originally posted by: aigomorla
Originally posted by: Gillbot
3.6-4.0 on a Q6600 is NOT the norm for overclocks.
oh boy dont you know it!
+1 trust me if it was this easy, Gill and i would have a lot more hair.
Originally posted by: clarkey01
Can someone list me what voltages they are using for 3.2 Ghz on this chip???
Are my temps ok by the way ?
Is there anything I can cut down on ? VID ?
Originally posted by: clarkey01
Also CPU-z and my bios reports different voltages, which to believe ?
3.3ghz @ FSB: 367, memory: 2.5x, CPUv: 1.46250v
even one level of CPUv below it is unstable.
northbridge and ram scalding to touch. room temperature rising constantly.
60c load.
3.0ghz @ FSB: 333, memory: 2.4x, CPUv: 1.3125V
two CPUv levels below it is unstable, one below was not tested.
50c load. northbridge and ram are hot, but not too hot at load.
Cool to the touch at idle.
Originally posted by: taltamir
my OC log:
Q6600 G0 SLACR. VID 1.325
I refer to voltage "levels"... from 1.325v to 1.3125v is a two level decrease, that is, in my mobo I have 1.325v then 1.31875V then 1.3125v. Each level is thus 0.00625v.
3.3ghz @ FSB: 367, memory: 2.5x, CPUv: 1.46250v
even one level of CPUv below it is unstable.
northbridge and ram scalding to touch. room temperature rising constantly.
60c load.
3.0ghz @ FSB: 333, memory: 2.4x, CPUv: 1.3125V
two CPUv levels below it is unstable, one below was not tested.
50c load. northbridge and ram are hot, but not too hot at load.
Cool to the touch at idle.
Originally posted by: 8millenium
I've been searching around and was wandering if anyone can help me locate a Q6600 with a VID in the 1.2's. I would like to buy one. I currently have one with a VID of 1.325
Thanks.