Discussion Arrow Lake Builder's thread

[DAPUNISHER]

Just an example. After a failed RAM overclock attempt, it brings up a message saying I can load BIOS defaults to boot or I can go into the BIOS. Both options do not work. I click like crazy on them with the mouse. Smash keys on the keyboard. It doesn't work. The menu doesn't accept any interaction other than highlighting the option or the UP and DOWN arrow keys. Maybe on a 3rd boot it will work but that's a BIG maybe. So I figured out a workaround. Press CTRL-ALT-DEL to reboot and start smashing the DEL key. It enters the BIOS before it has a chance to trigger the stupid BIOS default screen.

And I had to take out the CMOS battery maybe just ONCE with my ASROCK Z790 in its entire lifetime with me. With the Gigabyte, it's EXPECTED after the BIOS goes into an infinite loop due to some tweaking. Thankfully, it's easy to take out the battery.

Did you use the boost profile? Don't they still make boards for overclockers that have the bios reset button on the back I/O? If not, you could connect the reset to the clear CMOS when overclocking?

 

[511]

Did you use the boost profile? Don't they still make boards for overclockers that have the bios reset button on the back I/O? If not, you could connect the reset to the clear CMOS when overclocking?

Btw do you anyone on the forum who has used the boost profile?

 

[DAPUNISHER]

Btw do you anyone on the forum who has used the boost profile?

I do not. I like that it is allowed within warranty though.

 

[igor_kavinski]

Only other members with Arrow Lake I know:

@AcrosTinus Not sure if he tried the Boost profile
@In2Photos Did he get a gag order from Intel to not talk about his prize system?
@Kocicak Did we hurt his feelings enough for him to quit these forums?
@IEC He's also quiet about his recently bought system.
@ArrogantHair I think he's more into manual tuning so probably considers Boost profile beneath him

 

[igor_kavinski]

Did you use the boost profile? Don't they still make boards for overclockers that have the bios reset button on the back I/O? If not, you could connect the reset to the clear CMOS when overclocking?

It would require BIOS update. Only planning to do that with Arrow Refresh (yes, I will put myself through the Refresh experience for the community!).

My mobo doesn't have a CMOS RESET button (bought a cheapo ~$250 mobo).

It has a CMOS RESET jumper but it's easier to do it with battery than to follow the jumper ritual.

 

[DAPUNISHER]

It has a CMOS RESET jumper but it's easier to do it with battery than to follow the jumper ritual.

Connect the reset switch to the clear CMOS. Or buy one for the express purpose of recovering from failed settings. https://www.amazon.com/Cable-Matters-2-Pack-Motherboard-Computer/dp/B07FK7BQG9/

 

[igor_kavinski]

Connect the reset switch to the clear CMOS. Or buy one for the express purpose of recovering from failed settings. https://www.amazon.com/Cable-Matters-2-Pack-Motherboard-Computer/dp/B07FK7BQG9/

Didn't know those existed. Thanks!

 

[Io Magnesso]

It would require BIOS update. Only planning to do that with Arrow Refresh (yes, I will put myself through the Refresh experience for the community!).

My mobo doesn't have a CMOS RESET button (bought a cheapo ~$250 mobo).

It has a CMOS RESET jumper but it's easier to do it with battery than to follow the jumper ritual.

Usually, CMOS reset buttons are often present.
It's rare that there is a reset button on the back panel side of the motherboard.
It may not come with a motherboard that is reasonably priced.

 

[DAPUNISHER]

Good full featured overclocking boards have always had a price premium attached. https://www.amazon.com/ASUS-ROG-STRIX-GAMING-WIFI/dp/B0DGWHZKMC?th=1

I suppose my hot take is that complaining about how a bang for buck board reacts when you overclock with an old? bios seems nit picky to me.

 

[igor_kavinski]

I suppose my hot take is that complaining about how a bang for buck board reacts when you overclock with an old? bios seems nit picky to me.

You would be right I guess but ASROCK SONIC Z790 that cost about the same had none of these issues.

 

[DAPUNISHER]

You would be right I guess but ASROCK SONIC Z790 that cost about the same had none of these issues.

I don't know that comparing different platforms makes a lot of sense. Particularly if you are not trying various bios versions...

 

[IEC]

Only other members with Arrow Lake I know:
@IEC He's also quiet about his recently bought system.

The 265K is now in a ASRock Z890 Lightning with 200S Boost mode enabled (and 96GB DDR5-6400). No significant issues other than a lot of manual driver installation was required on Windows 11. I hesitate to try *nix for this reason...

The MSI Z890-P Pro Wifi is running the 265KF. It's having some sort of startup.nsh / UEFI secure boot issues and I can't be bothered to troubleshoot for the moment so it's sitting powered off for now. I may try to turn off secure boot and install Linux Mint to see how good or bad out of the box *nix compatibility is.

 

[igor_kavinski]

The 265K is now in a ASRock Z890 Lightning with 200S Boost mode enabled (and 96GB DDR5-6400).

Do you have any all-core workloads to test if they are working as expected or if the Lion Coves are being lazy and bowing out mid-workload?