Anandtech Member Case Gallery!

[lehtv]

Just adding to the fine selection of Fractals R3's. These pics were taken earlier this year, I've changed the fan setup a bit since then and also removed the lights.

Click to enlarge.











I realise that I need to sleeve the fan cable of the CPU cooler :/

 

[madebykier]

My Silverstone TJ11

Hardware:
Case: Silverstone TJ11
PSU: Coolermaster 1200w
Motherboard: Asus REXIII
Processor: i7 930
GPU: 3 x GTX 480
Memory: 6 x 2GB Corsair DDR3 1600
Hdd 1 x SSD 120GB and 4x 1TB sata

Cooling:
2 x EK 360 radiator
EK HF Supreme plex
EK Ram cooler plex
BitspowerSilver shiny
Tygon tube Transparant
And more…….

 

[madebykier]

My Lian Li tower

The hardware

- I7 920 D0
- 6x 2GB Corsair DDR3 1600
- 2 x EVGA GTX470
- Antec True Power Quatro-1000
- 2 x Aqua-computer Aquaero VF
- Asus Rampage III GENE
etc.

Water cooling

- 2 x Black Ice GT Stealth 240 Black
- 2 x EK GTX470 waterblock
- EK Supreme CPU block
- 2 x EK-Multioption RES X2 - 150 Advanced
- 2 x Swiftech 355
- Tygon slang
- Bitspower Fittingen

 

[madebykier]

And my second place winner CM competition, the Coolermaster HAF X
CM-HAF-XL

Hardware:
- HAF X
- PSU Coolermaster Silent pro gold 1200W
- EVGA Classified E759
- I7 930
- 6x 2GB Corsair DDR3
- Tripple GTX470
- Aqua-computer Aquaero
- Sony Optairc AD-7670
- 2 x SSD Intel 160GB
- 2 x 1 TB HDD

Cooling:
- 2 x Swiftech MCP 355
- 1 x EK Radiator XT360 (maybe 2 x instead. the 240)
- 1 x EK Radiator 240
- Tygon slang clear. 1/2
- 3 x EK GTX470 waterblock acetal/ nickel
- Bitspower Fittingen Black
- EK-FB EVGA X58 Classified
- EK Supreme CPU block Black
- 3 x EK Link Geforce
- EK Bridge serial tripple
- 2 x Aqua-computer cover MCP355
- 3 x EK Backplate GTX470 Black

Did a lot more builds, so if you like them take a look at my site MadebyKier

 

[Vdubchaos]

My new rig pics, specs in the sig

 

[ixiboneheadixi]

ok well i just copied a few pics from other peoples posts instead of quoting but how do people do this stuff? like in the first one how are all those pipe things done and all that, and in the first and second what are those cylinder things? and how do you get the tubes to glow like that? and also with the last one how does it look so clean like that like no wiresand it doesnt even look like a computer really, like these are all so cool how do people do this stuff, i want to build a PC soon and i want something like this

 

[CDC Mail Guy]

The rest of my components are in my sig. It was ON when I took the pics...kinda cool to me how it looks like the fans aren't running 🙂

Fair warning.....these pics are HUGE!!!!

Front. I plan on putting another fan in the top area, making a total of 3 intake fans in front. If I need to use an optical drive (which is RARE) I have a way of attaching externally.


From the side. This is the "best" cable management I personally could accomplish with the Antec 900.


A close up of side (not the neatest cable management as you can see)


"Close up" of the HUGE Noctua cooler. This thing is a beast 🙂 I could BARELY put the fans back on due to the 1/4 to 1/2 inch clearance at the top (I made the mistake of taking them both off...not just the middle one) Also, I unplugged the top fan.


Anyways....not quite as nice as a lot I have seen here, but I guess it all depends on the case you have...and the fact that I NEED a Dremel 🙂

 

[CDC Mail Guy]

Just adding to the fine selection of Fractals R3's. These pics were taken earlier this year, I've changed the fan setup a bit since then and also removed the lights.

Click to enlarge.











I realise that I need to sleeve the fan cable of the CPU cooler :/

Stunning...simply stunning compared to my Antec....I think my next case will be a Fractal R3 🙂

 

[The Boston Dangler]

ok well i just copied a few pics from other peoples posts instead of quoting but how do people do this stuff? like in the first one how are all those pipe things done and all that, and in the first and second what are those cylinder things? and how do you get the tubes to glow like that? and also with the last one how does it look so clean like that like no wiresand it doesnt even look like a computer really, like these are all so cool how do people do this stuff, i want to build a PC soon and i want something like this

those are some high-end builds. i'd even say those are competition-worthy pieces. these machines reflect their builders' technical talent and experience, sense of aesthetics, attention to detail, and possibly more money than brains 😀

 

[lsv]

My 650D now with some S12Bs in it. Super quiet :O

 

[ixiboneheadixi]

those are some high-end builds. i'd even say those are competition-worthy pieces. these machines reflect their builders' technical talent and experience, sense of aesthetics, attention to detail, and possibly more money than brains 😀

well how would i go about building something high end like that lol its something i have wanted to do for a long time

 

[GoStumpy]

Time, money, patience, skills.. Not necessarily in that order 🙂

I just finished building a Lian Li PC-Q07 case, and damn if that ever feels like a custom case build compared to normal computer 'Assembly'!

I think the higher quality the case, the more of a pleasure it is to put together 🙂

 

[The Boston Dangler]

well how would i go about building something high end like that lol its something i have wanted to do for a long time

you'll need:
several thousand dollars for parts
a good workspace - a sturdy table and good lighting at a minimum
lots of tools
lots of time
lots of experience - these guys have built many computers before getting that quality and sophistication.

there are no instructions on how to build a custom car, pc, et cetera and there will be expensive lessons and aggravation along the way. if you're comfortable with your artistic talent, budget, and technical ability then go for it. check out the Worklog threads in this forum to see a range of easy to advanced builds.

 

[xbournex]

what do you think?

 

[lsv]

what do you think?

More pics! Why post a crappy outside shot of the case? We want to see the wire management.

 

[xbournex]

More pics! Why post a crappy outside shot of the case? We want to see the wire management.

Because there's nothing special in the case at all 🙂
Well, a 6870, H50, and it's cables. NBD...

 

[Nemesis 1]

My Silverstone TJ11

Hardware:
Case: Silverstone TJ11
PSU: Coolermaster 1200w
Motherboard: Asus REXIII
Processor: i7 930
GPU: 3 x GTX 480
Memory: 6 x 2GB Corsair DDR3 1600
Hdd 1 x SSD 120GB and 4x 1TB sata

Cooling:
2 x EK 360 radiator
EK HF Supreme plex
EK Ram cooler plex
BitspowerSilver shiny
Tygon tube Transparant
And more…….

Very clean, Not overstated / Fine job .

 

[myinfinity]

This thread gives me inspiration. I'll download some images for references.

 

[lsv]

Did some upgrading, rig in sig.

 

[dreydin]

I really should not be in here

 

[General Kenobi]

WIP

 

[lsv]

Added a couple of drives to my R3, now I'm out of sata psu cables 🙁

 

[Bad ConNecTioN]

Switch 810, not a bad case for water cooling...its also lizard approved.

 

[donghui90]

I need money!

 

[dkm777]

OK, guess it's time to show off my rigs as well:

Main rig - "Flame":


Secondary rig - "Flow":