• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

【Maxon】Cinebench R20 Benchmark Thread

Page 12 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
My ST score was from a while ago. I recently did several ST R20 runs and have been scoring a 508. Anyone else have a lower ST score since the last few windows updates? I don't think it's Margin of Error, seems to large.
 
BTRY B 529th FA BN said:
My ST score was from a while ago. I recently did several ST R20 runs and have been scoring a 508. Anyone else have a lower ST score since the last few windows updates? I don't think it's Margin of Error, seems to large.
Click to expand...

It's only a 1.17% difference, I wouldn't be too concerned about that.
 
BTRY B 529th FA BN said:
My ST score was from a while ago. I recently did several ST R20 runs and have been scoring a 508. Anyone else have a lower ST score since the last few windows updates? I don't think it's Margin of Error, seems to large.
Click to expand...

i'm on 1909 and no decrease in score.

also was that a typo

"MT 3778" should be 4778?
 
Makaveli said:
i'm on 1909 and no decrease in score.

also was that a typo

"MT 3778" should be 4778?
Click to expand...

3778 is 8/8 SMT is off

I found the issue and was hitting 515/516, again. Actually I ran a 525 not too long ago with some adjustments with the bios and power plan, but the best balance brings me 520 ST

Thank you for the reply 🙂
 
7042 mt

I don't bother with single it matters so little as i keep this thing loaded 24/7. F@H was running and the second i went to run, it went poof or something idk. Forgot it was running. That uses like 4.6% of the cpu usually as it needs a thread for the 1080ti to fold. Score with all off is like 7073. CPU usage charts are showing me goofing off half a run, shutting it down reopening and then benching.

Rig in signature, fully updated to 1909. 105 TDDP in place here. Normal LLC. Power plan is stock balanced, minus a kill on any sleep modes

https://imgur.com/a/Zyqo1sm
 
Last edited:
Also, from my previous run, here are the current/min/max clocks. CCD0 has hit 4.8 GHz before on every core at different times. CCD1 has hit 4.4 GHz on every core at different times. The chip idles at around 970mV. I don't know what the week code is on my chip, but I just purchased it 2 weeks ago.

clocks.PNG
 
eek2121 said:
Also, from my previous run, here are the current/min/max clocks. CCD0 has hit 4.8 GHz before on every core at different times. CCD1 has hit 4.4 GHz on every core at different times. The chip idles at around 970mV. I don't know what the week code is on my chip, but I just purchased it 2 weeks ago.
Click to expand...
You should check/monitor the "Core X effective clock" in hwinfo instead, as only it will tell you the real clockspeed your cpu was running at in said benchmark..

I only monitor core 0 and 1 as these are my best cores, together with my average effective core clock. (screenshot below not from any "bench session")
clockspeed.png

Highest single threaded i've managed in Cinebench R20 is 546 points, and a multithreaded score of 10300 points
CPU-Z = 579.9 singlethread and 11786.5 multithread

All numbers above with PBO enabled
 
Last edited:
Det0x said:
You should check/monitor the "Core X effective clock" in hwinfo instead, as only it will tell you the real clockspeed your cpu was running at in said benchmark..

I only monitor core 0 and 1 as these are my best cores, together with my average effective core clock. (screenshot below not from any "bench session")
View attachment 22002

Highest single threaded i've managed in Cinebench R20 is 546 points, and a .multithreaded score of 10300 points
CPU-Z = 579.9 singlethread and 11786.5 multithread

All numbers above with PBO enabled
Click to expand...

I was going to, but the numbers were pretty close.

EDIT: playing around with undervoltimg right now and all I can say is WOW.
 
My 10900K @ 5.0GHz all core. 5.3GHz single core (although it's most likely 5.2GHz with other background processes running)

My 9900K @ 4.8GHz all core 5.0GHz single core is below it.

0Zwhs7o.png
 
Last edited:
AdamK47 said:
Tweaked the system a bit. Passed all my stress tests.
5.1GHz all core turbo
5.2GHz turbo with up to 3 cores
5.3GHz single core turbo
Ring at 4.7GHz
32GB DDR4 @ 3866 16-18-18-34-560-2T

hotlO8E.png
Click to expand...
Nice. Did you use different overclock settings for the single core and multi core tests?
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top