Recent content by Zombeeaholic

I have been having problems anyway I went into bios and changed memory from AUTO to ULTRA (someones advice) and now when I bootup my computer the screen won`t come on and the lights on the cd and dvd drive constantly blink.. Can someone PLEASE tell me how to fix or reset ,so I can get the bios...

I used a large amount of the ARTIC SILVER 5 compound for the heatsink and cpu, the tempature reading is from the BIO`s. (Is there another way I can check cpu tempature other than bios?) My memory is a 1gb module of DDR2 533 of G-Skill . Yes, the memory is in the right slot, my mobo has 2 slots...

I just built my first computer I used a ECS P4M800PRO-M V2 motherboard and a Intel Duo Core 2 E6300 cpu and a MAXTOR SATA 200gb HD. First,( BIOS are AMERICAN MEGATRENDS) my computer is beeping TWICE at startup which I belives means-parity circuity failure(What doe`s that mean?) anyway after my...

I built my first computer last week and everything has worked GREAT, BUT when I first turn on the computer it makes TWO short beeps. Can someone PLEASE tell me what this means? Everything has worked fine EXCEPT I bought a BFG 7800GS OC AGP 256mb videocard and it would only worked the first 10...

Hi, I just finished building my FIRST computer from the case up. I plugged in the cord and it came to life!! NOT one problem!!! I was actually SCARED it would be nothing but problems....Anyway can someone tell me what my OPERATION tempature should be about? Also, what tempature should I set the...

My motherboard lists two types of memory, the old DDR 400 and the DDR2 533 memory. I`d like to know which is the better memory? I don`t have a FAVORITE brand, I`ve been using OCZ. While looking at memory and trying to figure out what to buy, I see there is ALOT of HIGH PERFORMANCE DDR 400 memory...

Thanks, I`ll just leave them alone, I`m going to start putting it together this saturday or sunday, hopefully everthing will go fine, I`m kinda nervious. Thank You for the info,,,,Paul

Thanks ,,I wasn`t sure, but when I update flash I will have to remove the one jumper and when I`m done I put it back on, correct?

I`m building my first computer with a ECS P4M800 PRO-M V2 motherboard and a Intel Core Duo E6300 and have read the motherboard manuel and still am not sure how to set the jumpers ANYBODY got ANY ideas? I`ve bought 3 different books on computer building and none of them go into this much. I...

There is nothing that says "onboard graphics" in device manager.

I had a 512mb stick of memory that started to go bad and the screen would do the samething playing BATTLEFIELD VIETNAM and BATTLEFIELD 2, but would be fine surfing the net. It ONLY did it when all the memory was inuse...

I have the same problem, My gateway desktop was working fine with COX highspeed cable internet and I installed a new 160bg harddrive and reinstalled Windows XP and haven`t been able to get the internet to connect. Every time I try it says "Can`t find connection" . Device Manager says everything...

Would the DDR2 667 work, but run at 533? If the 667 will work I`d like to get it so when I upgrade mobo I can use the DDR2 667 memory.

ECS P4M800PRO-M V2 Motherboard with a Intel Core 2 Duo E6300 processor (1.86Ghz)

My new motherboard says it takes DDR 400 or DDR2 533 which is better? I was going to get the DDR2 533 then I read that the DDR 400 is faster, so WHICH should I buy? PLEASE HELP!! Thanks,,,