Recent content by jboot51

Indyboy2, I'm using the mystique as well, i've stuck another 12cm fan on the left side of the hd cage blowing air towards the graphics cards an providing air flow across the southbridge. This will bring the case temperature down dramatically.

I now agree that the gigabyte 965P-S3 is the way to go. oldhoss, I can reach 3.6GHZ, but not stable. 3.2GHZ is rock solid

I'm researching a similar project, was going for the Asus P5LD2 SE/C,as the Gigabyte 945PL-S3 will only support a FSB of 800 is this of concern?

Yes, the ram is compatible and can be swapped. Both boards will accept DDR400 PC3200. The dual channel comes into play if you have two sticks of ram that are a matched set ,ie. tested as a matching pair in the factory.Having a matched pair will double the performance of the ram ,compared to...

Re-Going from IDE to SATA2 you should notice a large jump in system performance!! I'll just explain a recent upgrade,which brings me to this statement. My second rig was a HP Mediacenter with a 3.2 P4,915P chipset and 160G Sata 1. I was fortunate to win the monthly prize at my PC Shop, which...

Ive just started to mess with speech recognition in windows. What your trying to attempt would be impossible because you need to train the software to recognise your voice, a fairly long process, reading scripts to it for many hours, then it is only about 95% accurate

It seems it is only using the 200meg on the page file and not ramping up as needed. My Virtual Memory is set at 1024-2048 X 2 Hard drives giving me this- Commit Charge: 534M / 3944M 2 Gig Ram 2048+1024 (c drive virtual)-1024(e drive virtual)=4096??????? Is it possible that your hard drive...

The SATA drives will just plug in, connect your new C Drive into SATA 1 (master) In Bios set the satas as STANARD IDE, if you plan to use your existing IDE Drive be sure to set it as Slave via the jumper Pins on the back(SATA Drives dont have pins for master\slave). In Bios you will also need to...

Try this link Ram List

I use GSkill F2-6400PHU1-1GBHZ and it runs fine @ 4-4-4-12, 2.1v

To install a fresh windows ,you need to boot from the CD Drive,you may need to set boot priority in BIOS.

I've had the same problem before, somehow my NORTON firewall blocked IE7 from accessing the net. It maybe worth checking. "I'm sure it's something little and stupid"