Recent content by Cobra

1993 Mustang Cobra, 270rwhp, 13.8 1/4 mile on street tires.

Hmm. Let me check...

Get a new car.;)

Lest anyone be confused, I am not knocking Nissan's engine, just pointing out that torque is what accelerates a vehicle and the more you have at lower rpms the better. American engine manufacturers in the past have not needed to go the small displacement high rpm route to get Hp. That, however...

We're not talking pimped out turbocharged bullcrap that most people don't do to their FAMILY sedans <http://forums.anandtech.com/i/expressions/face-icon-small-happy.gif> There's a reason why people buy oodles of Camrys and Accords over Grand Prix's and Impalas. And I wouldn't call the 240 HP...

Obviously you guys have never had the opportunity to experience a 3.8 liter GN running in the high 12s with very few inexpensive mods. Turbocharged...yes, but making more than the 240 hp you find in the detuned 3800 version available today. I always find it interesting that people think the...

1993 Cobra with 3.73 gears, JBA headers, 75 mm bullit, moroso cold air induction through fender, 1/2 heat spacer, and MSD coil. Runs 13.7 @ 100 in quarter on street tires in Texas heat w/o power shifting. No problem with stock Z28s but SSs are a better on the top end. New cam and computer...

You can figure out the difference in tire diameter between the two tire/rim combos using the following formula; total diameter in inches = wheel diameter in inches + (tire width in milimeters X aspect ratio/25.4)x2 so for a 245-40ZR17 the diameter = 17 + (245x.4/25.4)x2 = 24.716 inches...

Yeah, but it's still a neon. For a measly few more grand you could have a Mustang GT.

Been here since the beginning. Always lurking, sometimes posting. Missed the 753 but got in on the class action suit. BTW anyone got paid yet???

0-60 in low 5s, quarter mile 13.7 @ 100 on street tires. 93 Cobra with some bolt ons.

My Stereo is fairly old but still pretty decent. Dynaco ST410 200W/Ch Amp Carver CT-Seven Preamp JBL L112 Speakers Nakamichi 680ZX Cassette deck Nakamichi CDC-200 CD Changer Audio Control Richter Scale Analyzer/Equalizer Monster Cable hookups Cobra

If you run them on the same cable, they will run at ATA33 (the slowest drive). If you run them on separate channels (one on primary, the other on secondary) then the ATA100 will run at its proper speed.

If you run the Intel program it will tell you the expected CPU operating frequency and corresponding bus speed. This will tell you what you should be operating you CPU at. Of course this will only work if you have the CPU installed and running. If you are unsure, you can always install and run...

According to Intel, all 800's are cB0 stepping. You can download Intels CPU frequency and ID program at www.intel.com. It should show your CPU as a 0683 CPUID#. Also if it's an SL463/3Y3 it is to be used on a 100 mhz bus and if it's an SL464/3Y2 it is to be used on a 133 mhz bus.