If this drive is at all related hardware-wise to the Plextor, then this bit of insight from
http://www.ping.be/satcp/firmwares01.shtml may also apply to the Iomega 12/10/32 drive. If someone has opened up their Iomega drive already, would they care to try steps #2 and #3 and let the rest of us know?
Creative 8432 firmware 1.07
The Creative 8432 is actually a rebadged Plextor 8/4/32 (with only 2MB cache). To be able to use CloneCD with this drive you must have firmware 1.07 installed. However, Creative does not provide firmware upgrades on their website and the Plextor firmware update will not work. Here's a work around:
1. Download the Plextor firmware upgrade utility PXUpgrade32 and the Firmware 1.07 Binary File for PX-W8432T .
2. Switch off DMA for the Creative. You can do this in the Device Manager.
3. Switch off the PC and turn it back on while holding down the Creative's CD tray open/close button, you will notice that the drive's light will be flashing and then on bootup it'll show up as a Plextor 8/4/32.
4. Once in Windows you can run the Plextor update program and flash the drive to firmware 1.07.
5. Turn on DMA again.
6. Reboot your system.
This is at your own risk, this may void warranty!