hey guys...am running it now with my corsair twinx1024-3200C2PT memory at 2.5-3-3-6 202mhz and 3x ht, 8.5x multi, 310fsb!! what do you guys think?? can i push it further?? or any suggestions on improving it??
WHOA!!! running 2.635MHZ!
- Thread starter csflipfreakz
- Start date
And that was confusing as hell 2.6 mhz is pretty slow and then u said u were running at 202Mhz from 200. Whatt are you trying to do?
sori forgot to say....Asus A8n-SLI Deluxe bios 1004, 2x BFG 6600GT, Corsair TwinX1024-3200C2PT 2.5-3-3-6, A64 3000+ Winchester 90nm
prime?? what do you mean?? all i can say is ive been playing far cry v1.31 latest patch for about 1 hour and no lag and no errors
no the core speed is 2.635mhz from original 1.8mhz...memory is a little overclocked to 202mhz from original 200mhz....im jus trying to overclock as high as possible...also i dont get how memory is 202mhz...isnt 200mhz equivalent to ddr400?? bcuz when i boot with my oc settings, it says its on ddr266...shouldn't that be equal to 133mhz??
Prime is a program that puts your system though a test to check for stability. Nice oc by the way!
Never overclock again, infact:
Lock and ban.
My 386 ran at about 15 times the speed of that POS.
Had to do it. Someone had to.
you really need to do some research first
it's obvious you haven't read any of the overclocking guides here
it's obvious you haven't read any of the overclocking guides here
Gikaseixas
Platinum Member
- Jul 1, 2004
- 2,836
- 218
- 106
i really hope you dont mean that.my 486 runs at 66mhz. you'd better mean ghz boy. read the guides too. it's called a memory divider. that's why your mem is set at ddr266 and running at ddr404. search for memory dividers in this cpu forum. seriously, i must have explained it 3 times in the last month or two to different people.
a ban seems sorta harsh thpugh.
ahhh i downloaded prime and it keeps barfing up with errors...wow wonder why farcry doesn't have any problems but this program does...i guess ill lower clock speed down a bit...and regarding the memory dividors, i did read the guide like 15 times but i still dont get the concept so i just put it on auto in the bios hoping it would do it for me
You are running your fsb very high for this board, try lowering fsb and increasing cpu multiplier. Also, what psu have you?
farcry doesn't put your CPU at 100% for long periods of time
you'll get errors with farcry but it won't happen right away
you'll get errors with farcry but it won't happen right away
TRENDING THREADS
-
Discussion Zen 5 Speculation (EPYC Turin and Strix Point/Granite Ridge - Ryzen 9000)- Started by DisEnchantment
- Replies: 25K
-
Discussion Intel Meteor, Arrow, Lunar & Panther Lakes Discussion Threads
- Started by Tigerick
- Replies: 21K
-
Discussion Intel current and future Lakes & Rapids thread- Started by TheF34RChannel
- Replies: 23K
-
-
Facebook
Twitter