which is faster?

[han888]

finally my p3-700 can do 933 (133fsb) 1.80V after i put alpa pal35t! and my second system p3-800@1000 (125fsb)! now i just want to know which system is more faster?? i would like to swicth my geforce card! now my geforce card on my p3-800@1000, need an opinion!

=======================================
p3-800@1000 1.75v golden orb
asus cusl2 1001.a
256Mb hyundai pc133
asus gts v7700 denator 6.26


p3-700@933 1.80 V alpha pal35t
asus cuv4x 1005
128Mb Ecc hyundai pc133
G400

 

[AndyHui]

Very close......ECC will make a slight slowdown on the 933 unless you disable it.

Depending on how aggressive your RAM timings are, I think the 1GHz will just edge out the 933.

 

[han888]

hmmmm.. i hear from some people that enable the ECC make the system more stable?? i am not sure
anyway thx mate

 

[toph99]

benchmark them both maybe? somthing like sisoft sandra which has the cpu benchmark, or some such thing. but as far as i know, the ECC slows the system down, but thats just what i have heard, not a known fact to me. my suggestion is you do a bench with the ecc on, and off, and see what the results turn up

 

[Goi]

It would be pretty close, but since your P3-800 has more memory, and is non-ECC, and most importantly has a GeForce2 GTS as opposed to the G400 in the other setup, it would be faster in most cases.

 

[han888]

hmmm i feel sad here! last nigth my p3-700 can do 933! and i run seti home for all day! from 21.30 p.m until 11.30 am in the morning! it's about 14 hour something i run seti home, and the system it's still fine! i record the cpu temperature and the highest is 27 c with alpha pal35t, when i get up! i saw the system is still fine and still load the seti home! after that i close the program and restart the computer! after that the system can not run again at 933 i dont know why!!! any idea???

 

[Goi]

What do you mean by "can not run again at 933"? It doesn't POST? Doesn't make it to Windows? Makes it to Windows but locks up? Random reboots? BSODs? What?

 

[han888]

can not post into windows anymore!! it's very strange, i just finish run seti for 14 hour and then restart the system after that no post

 

[Goi]

Doesn't even POST? Did you try setting it back to 700MHz to see if it works?

 

[han888]

no, i mean can not post on p3-700@933 again, still can post at default and now i am back into old position p3-700@882

 

[utopia]

1GHz will be faster, just run some benches (Q3, etc)