• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Whats your CPU voltage AMD Barton and T-Bred users?

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
Originally posted by: BlueWeasel
2500+ running 2010ghz (182x11) @ 1.65v

It's not the chip that's holding me back; 182 FSB is as high as it goes on my 8RDA board w/o modding.
Click to expand...

i can get 200 FSB on my 8RDA, no mod.
havent tried higher.
before i had some crucial pc2700 and i hit the wall at 185
now i have some corsair pc3200 and got to 200.
 
2500+ @2.33ghz @ 1.725v. Everything is stable at that voltage for me. Booo having a locked chip so i can't change the multiplier.
 
3000+ retail @11.5x200fsb = 2305Mhz, stock voltage. Also have two 2600+ bartons running at the same speed, stock voltage.
 
2100+ @ 2233 mhz @ 1.79 V.
On a Aopen kt400 board...166 fsb-13.5 muliplier

HSF is a Coolermaster v 15 i think, not very bad for 20$.

50 c at idle and 57 at load. I do have 1 80 mm fan blowing at the hsf from the side which knocks the temp down 5 c more.


So i guess my cpu isnt the best overclocker, either that or its the board.

System has been stable at this speed for about 10 months now, amd heat certainly isnt a problem at all.
Ive hit 63c at 1.9v before, bad oc gain from that, but its all good. I love how amd chips can handle some decent temps unlike intels...
the only major stability problems ive had have come from fraudulint ram which was labled as 2700 but really just pc 2100...newegg is truely the only trustworthy online shop ive found out over time.


btw D@mn you people getting 2.4 ghz at 1.625 - 1.7 v. :beer:
 
My Computer: 1800+ @ 2.2ghz 1.6V (actual 1.58V) DLT3C JIUHB green veiny pcb

My Bro's Computer: 1800+ @ 2.2ghz 1.65V (actual 1.62 ~ 1.63V) DLT3C JIUHB brown pcb
 
Dual 1700+ TbredB DUT3Cs @1749Mhz(140FSB) undervolted to 1.5volts. I'd go higher but my MPX board only has up to 12.5x multi and going above 140FSB at cas 2 gets prime errors.
 
XP 2500+ @ 3200+ 1.75V
Mobile Athlon64 3000+ @ stock (1.8) anywhere between .95V and 1.4V (PowerNow!) in my laptop
 
2500 @ 3200 (210FSB) default 1.65volts

stable at 215FSB and 1.75 volts, but i like default voltage.
i have a feeling i could push this sucker to 220 or higher, but i don't know what's holding me back.
ram? agp divider? btw.. i don't know anything about agp dividers.
 
1700+ DLT3C 0310/ 2.2gig@1.6v (goes much higher, crappy power supply)

1700+ DLT3C 0312/ 2.0gig@1.5v (goes much higher, 235watt PSU limmited)

1800+ Thorton 0338/ 2.08gig@1.65v (tried higher, that's about it for this one)

All are B core
 
ok, i just bought the following stuff - abit nf7-s version 2, Thermalright SLK947-U with Thermaltake 80x25 Smart fan II 74 CFM, athlon xp 2500+ unlocked and will be using 3 256 MEG sticks crucial PC2700 memory. i have a antec 400 watt power supply and run 2 hard drives and 2 optical drives. what kind of overclock can i expect from that setup? i was thinking of more mutliplier and a little FSB. what do you guys think?
 
Originally posted by: hclarkjr
ok, i just bought the following stuff - abit nf7-s version 2, Thermalright SLK947-U with Thermaltake 80x25 Smart fan II 74 CFM, athlon xp 2500+ unlocked and will be using 3 256 MEG sticks crucial PC2700 memory. i have a antec 400 watt power supply and run 2 hard drives and 2 optical drives. what kind of overclock can i expect from that setup? i was thinking of more mutliplier and a little FSB. what do you guys think?
Click to expand...

everything you bought is good, but try to get PC3200 rmemory from Corsair, kingston, OCZ, or Mushking with low latency "aggressive timing" example: 2-2-2-7 or 2-3-2-6.

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nforce 2 400U)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Maxtor 91531U3 15GB
2x Western Digital WD400BB 40GB serials
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1
 
Barton 2500+ @ 3200+ (220 x 10) , default voltage 🙂
2x 512 GEIL PC3500 @ 2.5-3-3-6.. cant get it to post at cas2
[see sig for rest of rig]
 
1.625 in bios 1.65 read by MBM5. I can OC the chip alot highier but I have PC2100 in my system that will only go to 183 mhz so thats what is holding me back.
 
i currently have my 1700+ JUIHB DUT3C 0312 @ 200x11 @ 1.775v (everyday use)
the highest i can get it is in my sig at 1.85v

BTW, im currently wondering how tight is the fit of 947U on the NF7-S Rev. 2.0 im deciding on getting one and i dont want to use the promgs on the socket by using a 900A
 
Originally posted by: pelikan
1.95V. CPU at 2500 MHz (218 x 11.5). Cooled by chilled water.
Click to expand...

holy sh!t man lower your voltage!!! you're gonna burn your cpu

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nforce 2 400U)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Maxtor 91531U3 15GB
2x Western Digital WD400BB 40GB serials
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1


 
Originally posted by: Elrichmeister
i currently have my 1700+ JUIHB DUT3C 0312 @ 200x11 @ 1.775v (everyday use)
the highest i can get it is in my sig at 1.85v

BTW, im currently wondering how tight is the fit of 947U on the NF7-S Rev. 2.0 im deciding on getting one and i dont want to use the promgs on the socket by using a 900A
Click to expand...

Budy don't worry, the SLK-947U works like a charm on the NF7-S V.2 order it right now😛

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nforce 2 400U)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Maxtor 91531U3 15GB
2x Western Digital WD400BB 40GB serials
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1



 
You must log in or register to reply here.

TRENDING THREADS

Back
Top