- Dec 13, 2003
- 6
- 0
- 0
I used to have 2x512MB Kingston HyperX PC3500 ram. On my rig I could set teh timings to 2.5-2-2-5, perfectly stable. CPUZ even said it was going at 2.0-2-2-5. I gave those two DIMMs to someone else and got two new ones. The only difference I could see visually is that the new ones have a little red kingston logo on them (the old ones didn't). Now, with everything the same, I can't get the RAM to clock at 2.5-2-2-5. I can only get 2-2-3-6. WTF is going on? Did kingston change the ram someway more than aesthetically or is this something I should expect? Here's my setup-
P4 2.6c
MSI 865PE, bios v1.3
HyperX PC3500 1GB
128MB Leadtek GeForceFX5900
Fortron 530W PSU
DDR Volt 2.65
AGP Volt 1.50
Dynamic Overclock- Private
Performance- Fast (PAT Enabled)
AGP Aperature 128MB
Everything else basic
P4 2.6c
MSI 865PE, bios v1.3
HyperX PC3500 1GB
128MB Leadtek GeForceFX5900
Fortron 530W PSU
DDR Volt 2.65
AGP Volt 1.50
Dynamic Overclock- Private
Performance- Fast (PAT Enabled)
AGP Aperature 128MB
Everything else basic