*UPDATE* Got my 1800+ DLT3C "JIUHB" ... from newegg! with overclocking results

[Whitedog]

My 2100+ from NE is running supa stable at 233x10 (not sync yet, but I'm getting some DDR466 on da way soon).
I had to crank the Voltage up to 1.8 on the vcore... I don't care if it fries in 9 months. I'll have a Barton by then.

Temps are 47c load under a SLK900U. (I know, it seems hot compared to the 1700+ temps.)

Cheers!

 

[nebula]

OK, finally got the heatsink and some time, about 30 minutes , to put this thing in. Fired it up at default, OK it works. Changed to 133x11 and all was good. Decided to try for the gusto, 200x10... no post. Now that I think about it, if I would have bumped the voltage a little then maybe, but I was just playin' around. I put it back at default for now to get some baseline temps, about 40C with eMule running, no more than 43C while encoding a movie. Keep in mind, I don't have a super-duper cooling machine, but not that shabby. Speaking of encoding, it used to take me about 3 hours for an hour of video, now 2 hours!

 

[sambao21]

I just got my 1800+, but it's a DUT3C JIUHB 0310XPMW, I haven't tried it yet, and I've called Newegg for a replacement because it says on the website a DLT3C. Anyone else get a DUT3C 1800+? It's got a purplish hue to it.
Here are the exact codes:

AXDA1800DUT3C 9390666270436
JIUHB0310XPMW 1999AMD

What do you guys think?

 

[infinite012]

OVERCLOCK IT! See how well it does first @ 1.6vcore then up it to 1.7 and see what you can do there!!!

*dr00l* 0310 1800+...this, I've got to see.

 

[sambao21]

This cpu isn't for me, it's for my cousin so i don't want to use it unless i know it can overclock well and keep it. I'm building a system for her for cheap, and overclocking is as cheap as I can get and still get a 2Ghz system. Do you guys think Newegg will take it back if I've used it?

 

[BmXStuD]

1700+ still smokes 1800+ hehehehehe.

below in sig'd

 

[Amorphus]

newegg will take it back if you used it, yes. just say you noticed it was a DUT3C when you were installing a new HSF.

overclock it, too. they cant tell fi you overclocked it unless its fried visibly.

 

[nebula]

Originally posted by: sambao21
I just got my 1800+, but it's a DUT3C JIUHB 0310XPMW, I haven't tried it yet, and I've called Newegg for a replacement because it says on the website a DLT3C. Anyone else get a DUT3C 1800+? It's got a purplish hue to it.
Here are the exact codes:

AXDA1800DUT3C 9390666270436
JIUHB0310XPMW 1999AMD

What do you guys think?

Well, they do state that it's a DLT3C so... if they don't charge a restocking fee and if it makes you feel better, send it back. From what I've read, the DLT3C should OC better, but I think you could still hit 2GHz with the one you have, with good cooling. If you're building her a "cheap" system, what kind of cooling will you have?

 

[sambao21]

I've ordered a volcano 9, it was only $17, and I think it should handle 1.8v at the most.

 

[sambao21]

I was just curious, but has anyone gotten a tbred A from newegg lately when ordering the 1800dlt3c?

 

[Naruto]

Originally posted by: BmXStuD
1700+ still smokes 1800+ hehehehehe.

below in sig'd

Hehe, my 1800+ smokes your 1700+. Mine is at (211x10.5 = 2216mhz) at 1.6 volts.

 

[infinite012]

Originally posted by: sambao21
I've ordered a volcano 9, it was only $17, and I think it should handle 1.8v at the most.

WHERE!?!?! I've been looking for one that is <$25 shipped.

EDIT: Heh...actually I'm saving up for water cooling or the likes (liquid nitrogen...omGAWD)

 

[sambao21]

openlinx.com

 

[WA261]

Originally posted by: Naruto

Originally posted by: BmXStuD
1700+ still smokes 1800+ hehehehehe.

below in sig'd

Hehe, my 1800+ smokes your 1700+. Mine is at (211x10.5 = 2216mhz) at 1.6 volts.

and my 1700+ smokes your 1800+

 

[nebula]

The 1800+ at Newegg now is listed as a DMT3C...

 

[screw3d]

Originally posted by: nebula
The 1800+ at Newegg now is listed as a DMT3C...

Does that mean that it sucks or what? Results plz

 

[nebula]

Originally posted by: marvie

Originally posted by: nebula
The 1800+ at Newegg now is listed as a DMT3C...

Does that mean that it sucks or what? Results plz

I wouldn't say sucks, but from what I've read the DLT3Cs OC "better" because the default core voltage is lower. But, that doesn't mean the DMs don't OC at all... If I recall correctly, still can probably hit 2GHz with it.

 

[nebula]

Actually I was just looking at AMD's tech docs. The DMT3C is a Model 6 whereas the DL and DU are Model 8. So I checked Newegg again, guess I didn't look that closely before... the DM is a Palomino and the TBred just says, "model AXDA1800", so they are not guaranteeing the DL anymore, but still may get it...

 

[screw3d]

Originally posted by: nebula
Actually I was just looking at AMD's tech docs. The DMT3C is a Model 6 whereas the DL and DU are Model 8. So I checked Newegg again, guess I didn't look that closely before... the DM is a Palomino and the TBred just says, "model AXDA1800", so they are not guaranteeing the DL anymore, but still may get it...

Whoops..my bad... I also took a look at the specs sheet... and in any case M refers to 1.75v..most likely a Pally.. why on earth is Newegg still holding stocks of these??