• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Sapphire HD4870x2 Problems

U

Unit1Evangelion

Member
Today I received my HD4870x2 to replace my 4870 512m. I am using an adaptor for the 8pin from the PSU. When ever I boot up the computer, it will run for about 20 seconds and then monitor shuts off, computer restarts or freezes.

I checked online and have been hearing mixed reviews about using a 650w PSU to run it. Most of them seem to say its enough to run it. A few times I was able to get up to windows and roam around but my fan control and CCC is unable to read the card even after installing Cat 8.9.

Anyone have any ideas on what might be wrong?

Computer Stats below.

Thanks
 
What PS is it?

are you using the right 8-pin adapter? Some don't ground the two pins that would be uncovered by the 6-pin plug

 
I'd research 4870 X2 minimum amps required from the 12v rails. You have 2 x 18A. Is it enough?
 
Originally posted by: SteelSix
I'd research 4870 X2 minimum amps required from the 12v rails. You have 2 x 18A. Is it enough?
Click to expand...

I am honestly not that much of a wizz when it comes to power consumtion. I found a chart but don't really have the slightest on what it means. Though it shows that it only uses up 265watts which makes the 650W PSU more than enough.

chart is here

I am running a Gigabyte P45 DS3L mobo.
 
Maybe the adapter is wrong

i got one that was mismatched to my needs

i just use the 6-pin connector and then connect the exposed pins with an alligator clip wired to a black molex ground

are you making sure that your card is firmly seated? are there any beeps? have you switched your connectors into the card? Maybe use a molex to pcie adapter for one of them

is your a CF MB? if so, try X2 in the other slot
 
Originally posted by: Unit1Evangelion
Originally posted by: SteelSix
I'd research 4870 X2 minimum amps required from the 12v rails. You have 2 x 18A. Is it enough?
Click to expand...

I am honestly not that much of a wizz when it comes to power consumtion. I found a chart but don't really have the slightest on what it means. Though it shows that it only uses up 265watts which makes the 650W PSU more than enough.

chart is here

I am running a Gigabyte P45 DS3L mobo.
Click to expand...

Here's one post that talks about it. I'm not an expert on psu's, but am guessing amperage is too low.

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top