Hello everyone. I seem to have run into a little problem getting my LAN to work. Im trying to set up two PCs to share my cable modem. I have two Linksys Ethernet cards in my server, and a Netgear Ethernet card in the client. My cable modem hooks to one of the Linksys cards in the server. The second Linksys goes into port 1 (not the uplink port) on my 4 port hub. The Netgear ethernet card, in the client PC, is hooked up into port 2 on my hub. Now, I am able to access the internet using the server computer, and, I am able to view a folder, thats shared on the client PC, from the server. I am also able to view a folder, thats shared on the server PC, from the client. However, I am unable to access the internet from the client.
I am running Win 98, first edition, from both PC's. I am also running Wingate on both PCs, with Wingate, on the server, configured as server, and Wingate, on the client, configured as the client.
Heres how I have my internal network ethernet cards configured.
Server
Ip Address Tab
Specify IP address is checked
IP address 192.168.0.1
Subnet Mask 255.255.255.0
WINS Configuration Tab
Disable WINS Resolution is checked
Gateway Tab
No installed gateways
DNS Configuration Tab
Disable DNS is checked
Rest are defaults
Client
Ip Address Tab
Specify IP address is checked
IP address 192.168.0.2
Subnet Mask 255.255.255.0
WINS Configuration Tab
Disable WINS Resolution is checked
Gateway Tab
Installed Gateway: 192.168.0.1
DNS Configuration Tab
Disable DNS is checked
Rest are defaults
I had thought that the internal ethernet card was supposed to be connected to the Uplink port on the hub, but when I did that, I was unable to access the network from either PC. Anyone have any ideas of whats going on here? Any help would be greatly appreciated.
I am running Win 98, first edition, from both PC's. I am also running Wingate on both PCs, with Wingate, on the server, configured as server, and Wingate, on the client, configured as the client.
Heres how I have my internal network ethernet cards configured.
Server
Ip Address Tab
Specify IP address is checked
IP address 192.168.0.1
Subnet Mask 255.255.255.0
WINS Configuration Tab
Disable WINS Resolution is checked
Gateway Tab
No installed gateways
DNS Configuration Tab
Disable DNS is checked
Rest are defaults
Client
Ip Address Tab
Specify IP address is checked
IP address 192.168.0.2
Subnet Mask 255.255.255.0
WINS Configuration Tab
Disable WINS Resolution is checked
Gateway Tab
Installed Gateway: 192.168.0.1
DNS Configuration Tab
Disable DNS is checked
Rest are defaults
I had thought that the internal ethernet card was supposed to be connected to the Uplink port on the hub, but when I did that, I was unable to access the network from either PC. Anyone have any ideas of whats going on here? Any help would be greatly appreciated.