• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

>>> P4m 1.7 <<<

T

THUGSROOK

Elite Member

TEST SYSTEM
P4m 1.7 8/21/02 SL6DC b0 (12x multiplier)
Alpha HSF | Panaflo M1A | ASII
Asus P4B533 i845e (bios 1011)
XMS3000 256mb | GF4600 @ 320x714 | 30.82 drivers | Win98SE


> CAS Settings / Vdimm <
2400mhz 200fsb 400ddr = 2.0-2-2-7 / 2.6v
2520mhz 210fsb 420ddr = 2.0-3-2-7 / 2.6v
2640mhz 220fsb 440ddr = 2.5-3-2-7 / 2.6v
2700mhz 225fsb 450ddr = 2.5-3-2-7 / 2.6v


BENCHMARKS 1024x768x32

> 3DMark2001 <
2400mhz 200fsb = 12417
2520mhz 210fsb = 12667
2640mhz 220fsb = 12942
2700mhz 225fsb = 13107


> X-Isle Demo <
2400mhz 200fsb = 133.8
2520mhz 210fsb = 136.1
2640mhz 220fsb = 138.2
2700mhz 225fsb = 139.2


> Quake III Arena <
2400mhz 200fsb = 226.4
2520mhz 210fsb = 234.8
2640mhz 220fsb = 242.1
2700mhz 225fsb = 243.7


> UT2003 Demo < Flyby --- Botmatch
2400mhz 200fsb = 165.1 --- 66.4
2520mhz 210fsb = 167.5 --- 69.0
2640mhz 220fsb = 168.9 --- 71.6
2700mhz 225fsb = 170.3 --- 73.1


> Scisoft Sandra 2003 < memory --- cpu --- media
2400mhz 200fsb = 2977/2873 --- 4179/1583/3131 ---- 9478/12072
2520mhz 210fsb = 3109/2973 --- 4198/1663/3289 ---- 9959/12676
2640mhz 220fsb = 3256/3117 --- 4493/1743/3445 --- 10437/13285
2700mhz 225fsb = 3334/3191 --- 4606/1782/3526 --- 10673/13588


STRESS TESTS

> DivX5 Encoding < dvd - 3cd divx
passed upto 2700mhz 225fsb 450ddr 🙂

> Memtest86 < all 11 tests, 10 loops
passed upto 2700mhz 225fsb 450ddr 🙂

> Prime95 < 5 hour loop
passed upto 2700mhz 225fsb 450ddr 🙂

 
benchies will be posted as the results come in.

*please note my 3dm2k1 scores are gonna be 1400 marks low because i use the 30.82 drivers and not the 40 series dets.

🙂
 
yes that would be a good idea ~ a penny is just about the right size too.

it can be very thin ~ i used and sliver of aluminum (USB port cover) from a I/O plate 😉
 
cpu @ 200fsb is 32*C idle ~ not great but ok.
moboard is 30*C ~ typical.

default idle vcore is 1.648v as seen in pcprobe
 
since the multi defaults to 12 on the destop mobo's does that mean your's, mikki's & ErikaeanLogic's chips startes out at 142 fsb or are you taking them all the way from 100? and does this also mean that a 2.2 chip prolly wouldn't hit much if any higher speeds because, unless it good reach a much greater fsb it & the 1.7 multis are the same on the mobo?
 
my system booted up @ 12x100.

we dont think a "higher" chip is worth anything ~ we are memory limited so far.

all P4m cpus will default to 12x on a desktop board.
 
temps are out of control while running P95 @ 200fsb ~ may need to do something else........

Erik & Mikki ~ what were your max temps running P95?
im over 50*C here 🙁
 
Thugsrook, never went above 42c at any time...most stress testing stayed around 41c. dbwillis' penny idea sounds pretty good...🙂
 
i am now using a 2mm shim! 😉

lets see if this holds temps......

if not ~ ill have to remove the alpha standoffs and mount the HSF directly to the back of the moboard.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top