>>> P4m 1.7 <<<

[THUGSROOK]

TEST SYSTEM
P4m 1.7 8/21/02 SL6DC b0 (12x multiplier)
Alpha HSF | Panaflo M1A | ASII
Asus P4B533 i845e (bios 1011)
XMS3000 256mb | GF4600 @ 320x714 | 30.82 drivers | Win98SE


> CAS Settings / Vdimm <
2400mhz 200fsb 400ddr = 2.0-2-2-7 / 2.6v
2520mhz 210fsb 420ddr = 2.0-3-2-7 / 2.6v
2640mhz 220fsb 440ddr = 2.5-3-2-7 / 2.6v
2700mhz 225fsb 450ddr = 2.5-3-2-7 / 2.6v


BENCHMARKS 1024x768x32

> 3DMark2001 <
2400mhz 200fsb = 12417
2520mhz 210fsb = 12667
2640mhz 220fsb = 12942
2700mhz 225fsb = 13107


> X-Isle Demo <
2400mhz 200fsb = 133.8
2520mhz 210fsb = 136.1
2640mhz 220fsb = 138.2
2700mhz 225fsb = 139.2


> Quake III Arena <
2400mhz 200fsb = 226.4
2520mhz 210fsb = 234.8
2640mhz 220fsb = 242.1
2700mhz 225fsb = 243.7


> UT2003 Demo < Flyby --- Botmatch
2400mhz 200fsb = 165.1 --- 66.4
2520mhz 210fsb = 167.5 --- 69.0
2640mhz 220fsb = 168.9 --- 71.6
2700mhz 225fsb = 170.3 --- 73.1


> Scisoft Sandra 2003 < memory --- cpu --- media
2400mhz 200fsb = 2977/2873 --- 4179/1583/3131 ---- 9478/12072
2520mhz 210fsb = 3109/2973 --- 4198/1663/3289 ---- 9959/12676
2640mhz 220fsb = 3256/3117 --- 4493/1743/3445 --- 10437/13285
2700mhz 225fsb = 3334/3191 --- 4606/1782/3526 --- 10673/13588


STRESS TESTS

> DivX5 Encoding < dvd - 3cd divx
passed upto 2700mhz 225fsb 450ddr

> Memtest86 < all 11 tests, 10 loops
passed upto 2700mhz 225fsb 450ddr

> Prime95 < 5 hour loop
passed upto 2700mhz 225fsb 450ddr

 

[THUGSROOK]

benchies will be posted as the results come in.

*please note my 3dm2k1 scores are gonna be 1400 marks low because i use the 30.82 drivers and not the 40 series dets.

 

[BigJ]

this is gonna be good

 

[jpetermann]

WHOO HOOOOO! Give us tha good stuff man!!!

PJ

:Q

 

[LastRide]

Give us some of that 1.7M lovin.

 

[dbwillis]

Waiting........

 

[Mikki]

<big sigh> Bout time!!!!!! waiting patiently....

 

[WaTaGuMp]

I REFUSE TO WAIT TELL ME NOW

 

[ErikaeanLogic]

d00d, you better start at the 250 fsb range and work your way down:Q:Q!!!

good luck!

 

[Mikki]

250?!!! I'm expecting 266!!

 

[THUGSROOK]

* used "bent" motherboards may need a shim depending on your cooler

 

[dbwillis]

hmmmm...mayeb I should start lapping a penny on both sides to get it ready?

 

[THUGSROOK]

yes that would be a good idea ~ a penny is just about the right size too.

it can be very thin ~ i used and sliver of aluminum (USB port cover) from a I/O plate

 

[jpetermann]

So, what are your temps like then?

PJ

 

[THUGSROOK]

cpu @ 200fsb is 32*C idle ~ not great but ok.
moboard is 30*C ~ typical.

default idle vcore is 1.648v as seen in pcprobe

 

[Mikki]

Those temps aren't much worse than mine...voltage is higher too..

 

[Rhett]

since the multi defaults to 12 on the destop mobo's does that mean your's, mikki's & ErikaeanLogic's chips startes out at 142 fsb or are you taking them all the way from 100? and does this also mean that a 2.2 chip prolly wouldn't hit much if any higher speeds because, unless it good reach a much greater fsb it & the 1.7 multis are the same on the mobo?

 

[THUGSROOK]

my system booted up @ 12x100.

we dont think a "higher" chip is worth anything ~ we are memory limited so far.

all P4m cpus will default to 12x on a desktop board.

 

[THUGSROOK]

temps are out of control while running P95 @ 200fsb ~ may need to do something else........

Erik & Mikki ~ what were your max temps running P95?
im over 50*C here

 

[dbwillis]

Maybe the shims not think enough? or not flat enough?, 50'C sucks! (well , you always had cool temps!)

 

[THUGSROOK]

too hot ~ gonna try a thicker shim......

 

[Mikki]

Thugsrook, never went above 42c at any time...most stress testing stayed around 41c. dbwillis' penny idea sounds pretty good...

 

[THUGSROOK]

i am now using a 2mm shim!

lets see if this holds temps......

if not ~ ill have to remove the alpha standoffs and mount the HSF directly to the back of the moboard.

 

[Mikki]

Good luck Thugsrook!!! Gotta go to bed, look forward to seeing how you make out in the morning!

 

[THUGSROOK]

8*C cooler now under P95

time to bench.............