• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Overheated E4500...

T

ToneCrafter

Junior Member
Hey all! Obviously I'm a newb here. Hope you don't mind me joining in. 🙂

I've got a question regarding my new E4500 C2D proc. I was running 3dmark06 earlier and when I got to the cpu test my computer started beeping at me. Long story short, I tried a few more times only to find out that my cpu was reaching too high of temps causing my comp to beep at me. It only happed twice........is there any chance that I may have messed up the cpu? I reseated the cooler and all seems to be well now.

Thanks in advance for the help, all. 🙂
 
I believe you answered your question. Usually the built in Thermal control will kick in if temps get too high - a built in protection feature
 
Welcome to the forums! You are probably okay now, but let's be sure. I'm assuming you're at stock right now on CPU.

Make sure you are using Coretemp 0.95.4 beta or higher, and/or Speedfan 4.33 with 4.34 patch or greater in order to get proper temp readings. Using either of these tools, what are the load temps you get when running Orthos?

Also:
What vcore are you using?
What bios version and Uguru version do you have?
Are you running RAM 1:1 ? What timings?

 
Good to hear. I apologize if it was a dumb question. I'm new to building comps on my own. As long as I know the cpu will be ok.......all is fine. lol
 
Originally posted by: brencat
Welcome to the forums! You are probably okay now, but let's be sure. I'm assuming you're at stock right now on CPU.

Make sure you are using Coretemp 0.95.4 beta or higher, and/or Speedfan 4.33 with 4.34 patch or greater in order to get proper temp readings. Using either of these tools, what are the load temps you get when running Orthos?

Also:
What vcore are you using?
What bios version and Uguru version do you have?
Are you running RAM 1:1 ? What timings?
Click to expand...

My coretemp is version 0.96.1.

Phoenix AwardBIOS v6.00PG

Everything is bone stock...if that helps.
 
Originally posted by: ToneCrafter
Good to hear. I apologize if it was a dumb question. I'm new to building comps on my own. As long as I know the cpu will be ok.......all is fine. lol
Click to expand...

Not a dumb question...Just a concerned one...which is good...:thumbsup:

For now, just keep everything at stock and follow this guide:
How to guide: Memtest86+, Prime95, and SP2004
That is to Test your single/dual/quad core rig for stability.

Once you are stable and your temps are okay at stock then you are good to go.

I really don't think you damaged your CPU, the safety feature kicked in at it was supposed to.
I've noticed that CPUs don't malfunction...they either work or they don't


:beer:
 
just means your cpu went above ~80 or 85 degrees C. Thats where my 4300 beeps at me. If your running stock, you should probably reseat the cooler (as you've done) and the temps should go lower. You dont wanna see temperatures above 70, really.


open up coretemp next time your gaming, or benching and look at the temps during load. OR try a program called Intel TAT
 
These are tough cpu's. I had my E6300 running near 85C for months, 24/7. My temps were always screwy and all over the map, and even though they were high, I assumed the sensors were faulty. The first time I loaded Coretemp it was flashing: Warning, Processor 85C! Shut down processor immediately! Of course, I ignore it thinking it was just another sensor glitch as the computer was working perfectly. The system had no speaker, so if it was trying to beep at me, I didn't hear it. Then after a couple of months I noticed the heatsink was dangling loose a bit. Sure enough a couple of the pins had popped out! My heatsink had been unnattached for all that time. But idespite of that abuse, I am still using that cpu today. It overclocked to 533FSB x 7 on both my vanilla P5B and my current P5K Deluxe. So no worse for wear "These are one tough hombres!
 
Originally posted by: Xvys
These are tough cpu's. I had my E6300 running near 85C for months, 24/7. My temps were always screwy and all over the map, and even though they were high, I assumed the sensors were faulty. The first time I loaded Coretemp it was flashing: Warning, Processor 85C! Shut down processor immediately! Of course, I ignore it thinking it was just another sensor glitch as the computer was working perfectly. The system had no speaker, so if it was trying to beep at me, I didn't hear it. Then after a couple of months I noticed the heatsink was dangling loose a bit. Sure enough a couple of the pins had popped out! My heatsink had been unnattached for all that time. But idespite of that abuse, I am still using that cpu today. It overclocked to 533FSB x 7 on both my vanilla P5B and my current P5K Deluxe. So no worse for wear "These are one tough hombres!
Click to expand...

holy shnikes! did you push the other 2 pins back in, and reopen coretemp to see it at 65C ahahahahah?
 
I had my old Xeon 3040 running at 70C 24/7 for about 9 months and my E6400 was running at 68C 24/7 for about 16 months. The Core 2 architecture is incredibly durable, I didn't notice a single bit of frequency degradation or instability. If you are using the stock heatsink you may want to bump up to a beefier heatsink, it can make all the difference in the world between a sub 3GHz and 3+Ghz overclock which can really boost performance in benchmarks and games.
 
Originally posted by: Xvys
These are tough cpu's. I had my E6300 running near 85C for months, 24/7. My temps were always screwy and all over the map, and even though they were high, I assumed the sensors were faulty. The first time I loaded Coretemp it was flashing: Warning, Processor 85C! Shut down processor immediately! Of course, I ignore it thinking it was just another sensor glitch as the computer was working perfectly. The system had no speaker, so if it was trying to beep at me, I didn't hear it. Then after a couple of months I noticed the heatsink was dangling loose a bit. Sure enough a couple of the pins had popped out! My heatsink had been unnattached for all that time. But idespite of that abuse, I am still using that cpu today. It overclocked to 533FSB x 7 on both my vanilla P5B and my current P5K Deluxe. So no worse for wear "These are one tough hombres!
Click to expand...

I call shens. I've used CoreTemp to monitor temps that went up to 86C and beyond, and it never once flashed a warning at me.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top