• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Overclocking K6 III 400 Help !!!

N

Nickyct

Senior member
I'm trying to overclock my K6 III 400 to 450 on my Tyan S1598c2 motherboard by increasing the multiplier to 4.5 and the voltage at 2.4
When I boot up the system just hung up at Windows screen.

Any help would be appreciated.

thanks
 
I have the same setup... AMD + TYAN

Mine will run at 450, but it is about %5 less table.

I have a question however. Does yours fail when you shutdown windows. Mine shuts down like %80 percent, but then I get a kernel error and it reboots. However, I can "restart" from windows just fine.

Jason
 
I got it running. I increased the voltage to 2.5 and it boot up fine with no hang up. So far so good, I will probably will get a new fan. I'm afraid that it might get too hot.

I don't really see a big difference though.
 
You might find some of the information in these articles interesting/of help:

Reader Input: Overclocking the K6-III
http://www.aceshardware.com/Spades/read.php?article_id=108

AMD K6-3 Review: Part 2
http://www.anandtech.com/Showdoc.html?i=363

Also Overclockers.com has the o/c results from many users, not a lot of info but you can see what others have done:

http://207.229.137.213/cpudb

😀

Edit: Found out that when I put the P after the colon above that it gave me an unexpected "smiley" 😛
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top