• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Ok, got my comp ALMOST working, just another question -

S

Stiler

Banned
Ok, finally it started up and gave me one beep which means everything is fine, no ram or cpu problems or nothing. But i looked and it only detects a primary Slave, i only have my HD in it right now, don't have my dvd/cdr drive or floppy, isn't the Hard drive supposed to be the Primay Master drive though? i'm using a Asus P4s333.
 
It depends on what jumper you have set on the hard drive. If you are using cable select make sure the drive is at the end of the cable.
 
what harddrive are you using?

you can manually set the dip pin switch in the back of your harddrive... next to the ide ports...

set it to master.
 
yeah.. it's either the DIP switch or you have the HD plugged into the wrong connector on the IDE cable. It should be the black one on the end, not the grey one in the middle, if you want it to run as master.
 
Its a Seagate barracuda IV 80gig, i have it on the blue wire at the end of it, not in the middle.

edit- i meant to say i have the it "ON" the blue wire ribbon at the end of it *on the black end* the blue end is into the mobo.
 
Originally posted by: Stiler
Its a Seagate barracuda IV 80gig, i have it on the blue wire at the end of it, not in the middle.
Click to expand...
What is the jumper set to on the hard drive?
 
again... check on the dip setting.

usually manufactures send off their harddrives with slave setting...
'cause when people upgrade their harddrive... they keep the old one... and just plug the new one in on top.
which isn't all that smart. 🙂
 
^^ Right. Besides, using separate cables for each device is easier, unless you have more than two IDE devices. Does that help? 😀
 
Ok for some reason i have no jumpers on my Hard drive, what the heck do i do know? i just need a jumper to put on the end so it'll be set to master, argh.
 
Originally posted by: Stiler
Ok for some reason i have no jumpers on my Hard drive, what the heck do i do know? i just need a jumper to put on the end so it'll be set to master, argh.
Click to expand...

I would be willing to bet there are jumpers back there...

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top