**Official AMD T-BRED B O/C RESULTS 1700+/2100+**

[BigJ]

Woot! Reservoir is installed, installing the motherboard and some components as we speak. Should have some info up by 2AM (Tis 10PM EST right now).

Edit: Aight, decided to overclock my 2400+ first. I've got mine, but still overclocking my XP2400+ though, seeing how high that'll go. So far I'm at 173x13.5 at 1.95v using watercooling on the 2400+. Max temps are around 51C. I think I'm going to overclock now.

 

[Balex99]

Stepping:
AXDA2100DUT3C
AIUHB0301MPMW


Speed:
2220 mhz
13*170
1.70V

RAM
Crucial PC2100 2 x 256 megs
Not sure of timings (pretty conservative though)

Mobo:
Epox 8RDA+

Cooler:
Thermalright SK-7(lapped. Stock finish sucked).80mm YS-tech 48 cfm

I am hooked on this OCing thing. Finally got a board and chip that you can do it with. Raised my 3dmark score on my gainward 4200 golden from 10500 to 13100.

 

[Aiden]

Stepping:
AXDA2100DUT3C
AIUHB 0250MPMW

Speed:
2200 MHZ (11x200)
1.7v
38-39C (full load)
35-37C (idle)

Best Speed:
2340 MHZ(13x182)
1.85v
47-49C (full load)
45-47C (idle)

Ram:
Corsiar XMS 3200 1 x 512 Mb
2-3-3-6

Motherboard:
EPoX 8RDA+ nforce2


Cooling:
Thermalright SLk-800 With Y.S. Tech adj. fan

 

[zodder]

I seem to be stuck at right around 2.2Ghz with my 0302. (running 12x181). I'm hoping that the chip will loosen up with time and let me get a bit higher, but for now, 2.2 seems to be the peak.

 

[Shimmishim]

wow, i'm running my 1700+ at 12 x 180!!!

man, your 0302 isn't doing too welll i just ordered a 0302 2100+

 

[bgeh]

damn, makes me want a t-bred b chip
i'm sooooo jealous
too bad i'm broke

 

[BigJ]

Does anyone else find the relationship b/w temp and vcore insane? At 1.5v, I was idling at 33C. At 1.85v, I'm idling at like 47C

 

[Shimmishim]

it is a bit ridiculous.. but hey, more power more heat.... guess how it works ....

 

[BigJ]

Aight, finally my results are in:

Stepping:
AXDA2100DUT3C
AIUHB Week 50 of 2002

Speed:
2312.73mhz
177.9 x 13
1.85V

RAM:
Corsair XMS PC3500 C2
2.5-3-3-7

Cooler:
Koolance PC2-C
Idle: 43c
Load: 49c

Reapplication of AS3 dropped temps 4C, due to the fact I skimped too much.

 

[Shimmishim]

Originally posted by: BigJ2078
Aight, finally my results are in:

Stepping:
AXDA2100DUT3C
AIUHB Week 50 of 2002

Speed:
2312.73mhz
177.9 x 13
1.85V

RAM:
Corsair XMS PC3500 C2
2.5-3-3-7

Cooler:
Koolance PC2-C
Idle: 43c
Load: 49c

Reapplication of AS3 dropped temps 4C, due to the fact I skimped too much.

you have pc3500 ram, if i were you i'd lower my mult and up my FSB A LOT!!!

pc3500 = fsb 217ish
pc3200 = fsb 200
pc2700 = fsb 166

you have A LOT of room on your corsair...

try 11 x 210 = 2310

 

[BigJ]

Originally posted by: Shimmishim

Originally posted by: BigJ2078
Aight, finally my results are in:

Stepping:
AXDA2100DUT3C
AIUHB Week 50 of 2002

Speed:
2312.73mhz
177.9 x 13
1.85V

RAM:
Corsair XMS PC3500 C2
2.5-3-3-7

Cooler:
Koolance PC2-C
Idle: 43c
Load: 49c

Reapplication of AS3 dropped temps 4C, due to the fact I skimped too much.

you have pc3500 ram, if i were you i'd lower my mult and up my FSB A LOT!!!

pc3500 = fsb 217ish
pc3200 = fsb 200
pc2700 = fsb 166

you have A LOT of room on your corsair...

try 11 x 210 = 2310

Decided to do that with my 2400+ cause I hit a tad bit higher with it.

 

[hdj]

Stepping:
AXDA2100DUT3C
AIUHB0248MPMW


Speed:
2285 mhz
17*133
1.78V

RAM
Samsung registered pc2100 3 x 256 megs
7-1-1-1R-5-1-1-1W-2.0-2-2CL 1CMD

Mobo:
ASUS A7M266-D (yes I gots two of these bad boys)

Cooler:
slk-800 / AAVID-Thermaloy 39cfm fan
40/44C under full load.

comments:

It looks like my board clocks a little higher (at default fsb) than it says. bios setting is 133fsb, wcpuid's realtime clock says 2285. My voltage is all over the place. Vcore dips as low as 1.78 and goes as high as 1.90. +5V ranges from 4.87 to 4.97. and +3.33 goes from 3.25 to 3.38.

Current setting is prime stable. I am sure that if I were to get a better PSU, I'd easily get into the 2.4ghz range.

 

[Shimmishim]

Originally posted by: hdj
Stepping:
AXDA2100DUT3C
AIUHB0248MPMW


Speed:
2285 mhz
17*133
1.78V

RAM
Samsung registered pc2100 3 x 256 megs
7-1-1-1R-5-1-1-1W-2.0-2-2CL 1CMD

Mobo:
ASUS A7M266-D (yes I gots two of these bad boys)

Cooler:
slk-800 / AAVID-Thermaloy 39cfm fan
40/44C under full load.

comments:

It looks like my board clocks a little higher (at default fsb) than it says. bios setting is 133fsb, wcpuid's realtime clock says 2285. My voltage is all over the place. Vcore dips as low as 1.78 and goes as high as 1.90. +5V ranges from 4.87 to 4.97. and +3.33 goes from 3.25 to 3.38.

Current setting is prime stable. I am sure that if I were to get a better PSU, I'd easily get into the 2.4ghz range.

i doubt you'll get into the 2.4 range.... you're already at 1.78vcore .... it's crazy how you have to up the vcore up just to get another 30 mhz... i was trying to hit 2.2 ghz with my 1700+ and i upped the voltage from 1.775 to 1.9V to get 2.2 ghz.... i decided it wasn't worth it for 30 mhz...

but yes, you can always try a new psu, but i dunno if that'll help.... and yes, your voltages are all over the place... especially your vcore...

 

[Jen]

i doubt you'll get into the 2.4 range.... you're already at 1.78vcore .... it's crazy how you have to up the vcore up just to get another 30 mhz... i was trying to hit 2.2 ghz with my 1700+ and i upped the voltage from 1.775 to 1.9V to get 2.2 ghz.... i decided it wasn't worth it for 30 mhz...

but yes, you can always try a new psu, but i dunno if that'll help.... and yes, your voltages are all over the place... especially your vcore...

different powersupply may help with the power fluctations either that or its the voltage regulators on the motherboard


cocerning voltage in order for me to get 100mhz more i had to go from 1.74 to 1.87. with a different motherboard that may prove i dont need as much or i may need more. it varies from processor to processor and platform used



Jen

 

[zodder]

I'm jealous of all you 0250 and 0248 folks.

 

[BigJ]

Originally posted by: zodder
I'm jealous of all you 0250 and 0248 folks.

Just wait till Barton 2500+, hope thats a killer, and naturally we'll jump on that too

 

[Shimmishim]

I would wait for later steppings... it took a while for thoroughbred to mature... so i will wait until barton matures before i upgrade again...

 

[BigJ]

Originally posted by: Shimmishim
I would wait for later steppings... it took a while for thoroughbred to mature... so i will wait until barton matures before i upgrade again...

I'll probably get both, early and later versions, after I pay for a few expenses that is:

Class Ring: $289
Varsity Lettermen Jacket: $210
New Watercooling Setup: $175

But I'll be there eventually!

 

[calvink]

Stepping:
AXDA1700DUT3C
JIUHB 0301MPMW //Year 2003 Week 1

Speed:
1775 mhz (2100+ - 2200+)
12.5 x 142
1.625V

RAM: //IT'S HOLDING ME BACK, any recommendations? i'm a poor college kid.
Samsung pc2100 1 x 512MB
2.5-x-x //How Do I tell?

Motherboard:
MSI K7T266 Pro2-A
KT266A Chipset


Cooler:
ThermalTake Volcano 7
Arctic Silver 3
Day Idle: 40C
Day Stress Test: 42C
Night Idle: 35C
Nigh Burn In Test: 37C

 

[EriTech]

Stepping:
AXDA2100DUT3C

Speed:
1866 mhz
11.5 x 143
1.8V

RAM
Crucial 2100 2 sticks of 256mb

Cooler
Thermalright SLK-800 with TT Smart Fan 2


my speed seems low, its a locked CPU, does that seem right?

 

[blcjr]

Originally posted by: EriTech
Stepping:
AXDA2100DUT3C

Speed:
1866 mhz
11.5 x 143
1.8V

RAM
Crucial 2100 2 sticks of 256mb

Cooler
Thermalright SLK-800 with TT Smart Fan 2


my speed seems low, its a locked CPU, does that seem right?

What mobo?

 

[EriTech]

MSI KT3 ULTRA

 

[drewdogg808]

Originally posted by: EriTech
MSI KT3 ULTRA

shouldn't the tbred be unlocked on that motherboard? i had a kt3 ultra and my tbred 1700 was unlocked on it.

 

[EriTech]

the mobo unlocks the cpu by its self??

 

[Shimmishim]

yes!

well at least the nforce2 boards do...