• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Now that comp is up. What tests to run. And what 8rda bios settings??(temp update help)

F

FFactory0x

Diamond Member
Well, guys after 2 days of setting everything up. My computer is finally running.

2100+
9700 non pro
512mb pc3000 hyperx
8rda+
Window
uv light and uv round cables


Thankx a lot.


When i first booted it said 1500+ but i changed to 133fsb now its 2100+. I also changes the agp to 128m. What else should i change in the bios?? Also What programs should i run to check stabily,monitor temps and whatever etc....

I have a ys adjustable on the sk-7, and 5 antec case fans in my 835II. At stock upon bootup temp is about 28c
 
I put some suggested starting-out settings near the top of the official 8RDA+ thread in the Motherboards section. EPoX includes a monitoring program on the CD (it's called USDM).
 
Chuck the FSB to 166 man 😛
And lock PCI/AGP.
Then test. Your RAM and processor shoul dbe able to handle it if you up the voltage to 1.7~1.75.
 
i will do that all in good time. gotta ghost my machine first. By the way, how do i lock pci/agp. Though it was locked already. SHould they stay at the 133fsb?
 
and pci? So basically i have my slots oced? Also you said diable agp something and pci something. Dos this lock both pci and agp?
 
The PCI clock is always 33MHz no matter what. And if you don't remember what I said in the other thread... go back and read it again, silly 😀😉
 
hey i was up till 4:30 last night. Installation of software was easier then i ever imagined. Painless. Ill read but all those agressive and expert settings.Are they normal or kinda for ocing.
 
I haven't used either one, personally. My 8RDA+ was clocked at stock speed, plus it had an Alpha PAL8045 for cooling, so I didn't have much motive to monitor the temps in the first place. I saw a couple people saying MBM wasn't working on their nForce2 boards, for what that's worth.
 
You don't really need to tweak all the timings, but the one important thing is to make sure the memory is running at 100% of CPU speed so they're sync'ed, and that may require setting the CPU Interface to "Aggressive."
 
ok. I just dled mobo monitor and dont understand it. I set sensor 1 to Winbond diode one. I guess that cpu?

Plus 2 and 3 dont show anything. I also see voltage heres my read out in High/LOW

Current..........High.............LOW...............AVG.
Sensor1 -47..............-47............-47.................-38c
+3.3 2.67..........2.67............2.67................2.67
+5 5.03...........5.00.........5.03..................5.03
+12 12.22........12.16..........12.28...........12.21
-12 -12.85......-12.93.......-12.85..........-12.85
-5 -5.04...........-5.04.........-4.99..................-5.03






What about this is this ok????????? How bought those power readings?????


 
Originally posted by: FFactory0x
ok. I just dled mobo monitor and dont understand it. I set sensor 1 to Winbond diode one. I guess that cpu?

Plus 2 and 3 dont show anything. I also see voltage heres my read out in High/LOW

Current..........High.............LOW...............AVG.
Sensor1 -47..............-47............-47.................-38c
+3.3 2.67..........2.67............2.67................2.67
+5 5.03...........5.00.........5.03..................5.03
+12 12.22........12.16..........12.28...........12.21
-12 -12.85......-12.93.......-12.85..........-12.85
-5 -5.04...........-5.04.........-4.99..................-5.03






What about this is this ok????????? How bought those power readings?????
Click to expand...
Here's MBM's recommended sensor listings for EPoX boards: link

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top