Need some updated SETI WU times for the FAQ page...

[JHutch]

I was updating some of the SETI FAQ pages today (which was a WAY overdue process, I apologize), and I noticed the FAQ on WU times still has numbers from the 2.x clients. I put a disclaimer on there for now, but I was hoping people could look through their SETILog stats and give me some "average" WU times for a wide range and type of processors. I'd like to have all the major CPU types (Athlon, P3, P4, K6, Alpha, Sparc, etc) covered, as well as a decent range in each (for instance, a P3-450 and a P3-1000 and ...)

Also, there are two glaring omissions from the FAQ page. Namely, OrangeKid's team SETIQueue and instructions on setting up your own SETIQueue. I'll try and bang something out on these in the next couple of days, but if someone else already has something like this written somewhere that I'm not aware of (and is willing to donate to the team FAQ), please let me know. Don't want to reinvent the wheel if I don't have to!

JHutch

 

[srvblues00]

here's stats on my work (POS) computer:
Pentium II 333 NT4 SP4
32kb L1 cache, 512kb L2 cache

I've only completed two work units here, but here's the stats I have so far: (I do most of my crunching on my home PC.)

Work unit times are 16.543 and 16.676 in hours, and I usually average around 3.9 or so CpF.

As you can tell, this system blows. I'll try to post info on my Athlon system (1GHz OCd @ 1230MHz) later today when I go home.

 

[Polo]

Duron 933, 196 Mb, 64Kb L2, 128 Kb L1, ASUS A7V133
average : 7h12'
best : 6h05'
worst : 10h30'
Results taken from SETIQ (292 results).

 

[RaySun2Be]

[edit]
See post below for better information. :Q
[/edit]

 

[Wiz]

Here are my 4 systems, I disregarded the units where it took less than an hour to process.
These are all from WU done after March 1, on the 3.03 Cmd Line Client.

K62 500 96 megs PC 100 Win 98 SE
51 WU Average: 24 hr 56 min
Best: 21 hr 50 min
Worst: 39 hr 14 min

Celeron 300a @ 464mhz 128 megs PC100 CAS 2 Win 98 SE
175 WU Average: 12 hr 40 min
Best: 9 hr 21 min
Worst: 29 hr 53 min

P3 700e @ 868mhz 124 FSB, 128 megs Mosel CAS 2 SDRAM Win 2K Pro
326 WU Average: 6 hr 50 min
Best: 5 hr 52 min
Worst: 13 hr 10 min

P3 700e @ 966mhz 138 FSB, 256 megs Infinion CAS 2-2-2 5t/7t SDRAM Win 2K Server
342 WU Average: 6 hr 21 min
Best: 5 hr 25 min
Worst: 8 hr 15 min

 

[Assimilator1]

All running CLi v3.03 unless otherwise stated

PIII 650 @ 820 (CAS2 RAM,BX chipset) most WU's 7hrs
Cel 366 @ 550 (CAS2 RAM,BX chipset) most WU's 10.5 hrs
Cel 300A @ 374 (CAS2 RAM ,old VIA chipset) most WU's 16.5 hrs
Athlon 700 classic (CAS2 RAM,133MHz,4 way interleave,Turbo,VIA KX133 chipset)most WU's 8.5 hrs (GUI 11hrs)
PIII 500 @ 515 (CAS2,BX chipset) most WU's 14 hrs GUI,man that really sucks!!:disgust:
PII 333 @ 374 (CAS3 RAM,LX chipset) most WU's 18-19 hrs (GUI)
K6-2 @ 375 (75MHz FSB,CAS2 SDRAM,TX chipset,512Kb L2)most WU's 30 hrs
Pentium 100 (40 Mb RAM)1 WU 79hrs!:Q

Boy have I gotta sort out those 2 GUI client remote machines! ,I'll see if I can get him to run SETIDRiver instead.

 

[artemedes]

Ok, just went through my SetiQ history. Have lots of different work machines that are all gateways. All times are CLI, except where noted. All on Win98SE. Here they are by CPU:

Gateways:
1.3 Ghz P4 (pc800 ram) = 5:35
1.0 Ghz Athlon = roughly 7 hrs
1.0 Ghz Athlon (Gui client)=8-9 hrs
933 mhz P3 = 7:47
800 mhz p3 = 9-10 hrs
500 mhz p3 = 12-13 hrs
450 mhz p2 (gui client) = 15:35-16:20
400 mhz p2 = 13-14 hrs


Home built computers:
1159 mhz athlon (145 fsb) = 5.5-6 hrs
980 mhz athlon (200 fsb cpu, 133 ram) = 6:45
450 mhz k6-3 = 20hrs
266 mhz (66 fsb)P2 laptop = 20 hrs

I included the home builts because the ones I build do considerably better than the OEMs my workplace purchases. Notice the difference the FSB makes on the Athlons. The slower clock Athlon at 145 fsb, runs times sometimes as low as the P4 average. But I actually use the Athlon, The user that gets the P4 will be using it this month so it will no longer sit in my office doing nothing but seti. At that point I expect the 1.3 ghz P4 to turn in similar or slower average times than my 1159 Athlon. Hope that helps.

 

[Smoke]

My in house systems are doing the following averages:

Pentium III 1 GHz 6:15

Celeron 566/850 8:32

PIII 800 MHz Laptop 9:42

PII 450MHz 13:26

 

[Confused]

well my puter has done:
83 works units
in
1050hrs 23mins 31.2secs

which is an average of:

about 12hrs 40 mins per work unit

System:

Duron 700 (7 x 100)
128MB Crucial PC133 ram
Abit KT7 mobo

which is slightly better than the 23hrs my old 233 took!!

 

[Sukhoi]

Celeron 433

I'd say about 16+ hours/WU 3.03 CLI running 24/7 while machine is being used.

 

[Orange Kid]

I've been working waaaaaaaaayyyyyyyyy to much lately but will try to update the SetiQ FAQ.

I've got two comps in parts yet that need to be reassembled first and some catch up work on the stats yet, then maybe??????????????

EDIT__________
If anyone wants to put something together and send it to myself or AVG it can be added to the hobbit site.........FAQ's.........times in a table maybe? Sorry people, summers are rough on me, not enough hours in a day.

 

[OhioDude]

I only have SETILog on one member of my herd.

1100 MHz AMD T'bird @ 1100 MHz
200MHz FSB
256MB Corsair CAS2
Abit KT7A-RAID - All memory timings set at most aggressive values
6:19:25 (Average)

 

[RaySun2Be]

Here is more SETI WU information taken from SETISPY logs for about 12 days on the dual Xeon and 33 days on the Compaq:

Dual PIII 700mhz XEON 2M cache, 1G memory WIn2KPro:

SETI Instance #1
........Teraflops...Hours to Complete
AVG......3.98.......5.86
Max.......4.11.......7.25
Min........3.33.......4.50

SETI Instance #2
........Teraflops...Hours to Complete
AVG......4.06.......5.72
Max.......4.11.......5.87
Min........3.33.......4.52

Not quite as good as SETIPSPY first noted, but still not bad especially when compared to:

Compaq PIII733, 256M RAM WIN95
........Teraflops...Hours to Complete
AVG......3.98.......10.01
Max.......4.20.......13.64
Min........3.33........8.00

 

[Insane3D]

Iwill KK266-R
Athlon 1.2ghz@1.4ghz 165mhz FSB
512mb Crucial PC133

I am completing my work units @ a rate of 4hrs/wu, with a worst of 4hr15min when heavily using the PC. I am in the process of building a new DDR Athlon setup with a new stepping Athlon that should hit 1.6ghz-1.7ghz..

 

[Wiz]

^^^

 

[lane42]

Athlon - (TBird) "c" 1.2 @ 1.38 @ cas 2, 146 fsb, 128 mb corsair pc-2100 DDR ram,

Ave. 4:45
Slowest 6:15
Fastest 4:18

 

[Assimilator1]

Insane3D
:Q wow!

 

[Wiz]

bump -
people, add some info here! It would be nice to have a full featured page with late model procs / systems to point folks to as they ask questions like:
What seti times can I expect from my _inser cpu type here_?

 

[JHutch]

Right now I have a pretty good selection of x86 processors listed on the FAQ page. However, I haven't gotten any data on Sparc, Alpha, etc processors... So if any of you out there have such info, send it my way!

JHutch

 

[Sukhoi]

Poof owns an old Alpha I believe.

ColinP runs SETI on a lot of Sparcs.

See if they can get you any WU times.

Hey, did your power go out last night? Mine went out about 3 times, for around 5 seconds each time. I'm glad I got those UPS's installed for my C433.

 

[networkman]

Dual P3-600@644 - 256meg PC133@143 ram Win2K Prof. AVG WU: 11h10m (per CPU)

 

[Sukhoi]

What's a single CPU WU time on that computer? It sounds too slow even for a dual...the PII 400's I used to run took 12-13 hours/WU, and Poof's PII 400 MHz Xeon 1 MB is about 11 hours/WU.

 

[Wiz]

JHutch, are you updating the seti faqs?
How about the addition of seti driver so all processors of a Multi Proc machine can be more easily used and work units can be cached? Use of this prog and setispy seem to be a pretty common topic in the forum.

 

[TuffGuy]

tbird 1.6ghz @152mhz fsb
~4h15min

 

[Sukhoi]

Man that's fast! :Q