My Car Alarm remote quit working...

[skywhr]

I'll try it again

 

[HiTek21]

My brothers viper alarm started going haywires but it was an older model that doesn't have ignition immobilization. The remote would not arm/disarm the unit, the turn signals would blink, and the siren would not work. He just ripped it out and tossed it.

 

[Rastus]

Put a new battery in your remote.

Some remote batteries are 12 volt, so you can power the remote from the car battery with some wire and alligator cllips. I did that once at a Goodyear place when my remote went dead and they didn't have the right battery there.

 

[skywhr]

pull the brain? hows that? I dont even kjnow where the alarm is. Do I have to have the installer take it out? Its gonna cost me a fortune to have it towed to the installer!
There approx 28 miles away

 

[skywhr]

tried a new battery, tried the 1 second and turn the ignition, nothings working I will call DE tomorrow and the installer...See what they say.......

 

[rudeguy]

Originally posted by: skywhr
tried a new battery, tried the 1 second and turn the ignition, nothings working I will call DE tomorrow and the installer...See what they say.......

its DEI just for the record.

 

[minendo]

Put some fvcking batteries in the remote you douchebag.

 

[bmacd]

the brain is more than likely under your dashboard below your steering wheel. There is a ~20something wire harness plugging into a black box. Just unplug it and your car will fire right up.

-=bmacd=-

 

[minendo]

Originally posted by: bmacd
the brain is more than likely under your dashboard below your steering wheel. There is a ~20something wire harness plugging into a black box. Just unplug it and your car will fire right up.

-=bmacd=-

That or he could simply use the kill switch. Unless of course his ghetto install did not include said switch.

 

[rudeguy]

Originally posted by: bmacd
the brain is more than likely under your dashboard below your steering wheel. There is a ~20something wire harness plugging into a black box. Just unplug it and your car will fire right up.

-=bmacd=-

not if the starter kill is hooked up.


I CALLED THE F'IN MANUFACTURER, USED MY DEALER ID, AND GOT THE EXACT INSTRUCTIONS FOR THIS GUY. HE IS S.O.L.

/rant

 

[minendo]

Originally posted by: rudeguy

Originally posted by: bmacd
the brain is more than likely under your dashboard below your steering wheel. There is a ~20something wire harness plugging into a black box. Just unplug it and your car will fire right up.

-=bmacd=-

not if the starter kill is hooked up.


I CALLED THE F'IN MANUFACTURER, USED MY DEALER ID, AND GOT THE EXACT INSTRUCTIONS FOR THIS GUY. HE IS S.O.L.

/rant

He is not SOL. If he pulls the main harness he can follow the wires and reconnect the OEM wires to over ride starter kill. I did it in my Blazer.

 

[rudeguy]

Originally posted by: minendo

Originally posted by: rudeguy

Originally posted by: bmacd
the brain is more than likely under your dashboard below your steering wheel. There is a ~20something wire harness plugging into a black box. Just unplug it and your car will fire right up.

-=bmacd=-

not if the starter kill is hooked up.


I CALLED THE F'IN MANUFACTURER, USED MY DEALER ID, AND GOT THE EXACT INSTRUCTIONS FOR THIS GUY. HE IS S.O.L.

/rant

He is not SOL. If he pulls the main harness he can follow the wires and reconnect the OEM wires to over ride starter kill. I did it in my Blazer.

If he can't figure out how to push a valet button, he sure as hell cannot figure out which wire is his starter wire.

Could I tell him?? Yep
Will I now? Nope

 

[minendo]

Originally posted by: rudeguy

Originally posted by: minendo

Originally posted by: rudeguy

Originally posted by: bmacd
the brain is more than likely under your dashboard below your steering wheel. There is a ~20something wire harness plugging into a black box. Just unplug it and your car will fire right up.

-=bmacd=-

not if the starter kill is hooked up.


I CALLED THE F'IN MANUFACTURER, USED MY DEALER ID, AND GOT THE EXACT INSTRUCTIONS FOR THIS GUY. HE IS S.O.L.

/rant

He is not SOL. If he pulls the main harness he can follow the wires and reconnect the OEM wires to over ride starter kill. I did it in my Blazer.

If he can't figure out how to push a valet button, he sure as hell cannot figure out which wire is his starter wire.

Could I tell him?? Yep
Will I now? Nope

All he has to look for is the breakage in a main OEM wire. 😛

 

[bmacd]

forget everything i've said. replace the battery in your remote first.

-=bmacd=-

 

[Grey]

Hey, I need a new DEI remote I saw some on the web, are they hard to tie into your system?

 

[bmacd]

Originally posted by: Grey
Hey, I need a new DEI remote I saw some on the web, are they hard to tie into your system?

nope. there are DEI installer's manuals free on thier site.

-=bmacd=-

 

[rudeguy]

Originally posted by: bmacd

Originally posted by: Grey
Hey, I need a new DEI remote I saw some on the web, are they hard to tie into your system?

nope. there are DEI installer's manuals free on thier site.

-=bmacd=-

they take all of 10 seconds to program.

 

[skywhr]

WTF

 

[skywhr]

There is a silver switch above the valet button, you know the valet button I can't figure out how to push

Originally posted by: minendo

Originally posted by: bmacd
the brain is more than likely under your dashboard below your steering wheel. There is a ~20something wire harness plugging into a black box. Just unplug it and your car will fire right up.

-=bmacd=-

That or he could simply use the kill switch. Unless of course his ghetto install did not include said switch.

 

[rudeguy]

so what happenned?

 

[cavemanmoron]

Originally posted by: everman

Originally posted by: skywhr
My remote just quit working?

Any suggestions?

Its a Viper

For a moment there I thought Dodge Viper and was going to request pics. oh well