My Athlon XP Mobile results !

[VisableAssassin]

ok ive been thru plenty of these damned things...and well this one just OCs half assed as you can see in the pic...I want more !!!


it is a fairly large pic so 56kers go easy


My Mobile Results

and for those who think Small FFTs dont do jack heres a custom test

Custom test results

 

[jagec]

what was it? 2400, 2500, or 2600?

It warms my heart that you consider that to be a "mild" OC, seeing as I have a mobile coming in tomorrow
can't wait...

 

[VisableAssassin]

Mobile 2500+
Iqyha 0408


yeah I consider that a light OC since I havent hit my max Vcore yet...Ill stop at 2.00 in the BIOS since that should be near 1.97 or so true vcore...Im primeing again at 2652mhz...im gonna see if i can get close to 2.7....god im hopeing itll do it

 

[hytek369]

nice chip, where did you get yours from?

 

[MegaWorks]

nice results! cheers:beer:

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nForce2-U400)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1

 

[charloscarlies]

What are you cooling with?

 

[VisableAssassin]

Originally posted by: charloscarlies
What are you cooling with?

Im on water my friend.
Im useing a modded D-tek TC-4 Rev2..I modded it
my room is hot right now...stupid Texas desert heat
I wanna go higher...but I think I've hit my ceiling on this chip
The damn thing is plenty fast for me...but I still want more

Also I bought it from ExcaliberPC

 

[JackBurton]

Dude, WTH? I just ordered a mobile XP 2600+ from newegg and I'd be happy 2.2GHz at 1.58v. If I could do 2.6GHz that would be AWESOME! Damn, ECS board and its limited FSB and vcore. :|

 

[VisableAssassin]

Originally posted by: JackBurton
Dude, WTH? I just ordered a mobile XP 2600+ from newegg and I'd be happy 2.2GHz at 1.58v. If I could do 2.6GHz that would be AWESOME! Damn, ECS board and its limited FSB and vcore. :|

I did some research and got a stepping I knew yeilded good results if I go to 2.0v or so in the BIOS I could probably get above 2.6ghz
I love my NFS-S Rev2
Ill try higher later on.

 

[Shimmishim]

not too bad

i'm trying to find one that can do 2.7 to 2.8 on air!!!

the one i have right now can do 2.6 on air @ 1.85 volts... prime stable for 7 hours and then i stopped it... i usually only prime for 6... anyway...

2.6 is still pretty good for 1.9 volts...

i'm contemplating getting a waterblock again to use for the cpu (currently using my water setup to cool my gpu only on a swiftech mcw50t)

then again i do have this prommy also

 

[high]

i am running at 2.5 at 1.85, should 1.9 be ok since I have good cooling?

 

[pelikan]

Originally posted by: high
i am running at 2.5 at 1.85, should 1.9 be ok since I have good cooling?

If it'll run prime95 then the voltage is okay.

 

[MegaWorks]

Originally posted by: high
i am running at 2.5 at 1.85, should 1.9 be ok since I have good cooling?

yeah but isn't that too high "voltage" for a CPU, I heard that people fried their CPU's that way

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nForce2-U400)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1

 

[VisableAssassin]

Originally posted by: high
i am running at 2.5 at 1.85, should 1.9 be ok since I have good cooling?

1.9v is fine...the Model10 cores (Barton) are rated to an absolute max of 2.15v...but I wont run that high !
and shimm I wish I had a prommie

 

[Shimmishim]

Originally posted by: VisableAssassin

Originally posted by: high
i am running at 2.5 at 1.85, should 1.9 be ok since I have good cooling?

1.9v is fine...the Model10 cores (Barton) are rated to an absolute max of 2.15v...but I wont run that high !
and shimm I wish I had a prommie

hehehe but what good is a prommy w/o a mounting kit?

i still need to get one... but i'll get one after i find one that can do 2.7 on air

 

[MegaWorks]

is it possible to reach that kind of voltage (1.85v and high) with my T-Bred B DLT3C?

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nForce2-U400)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1

 

[VisableAssassin]

Originally posted by: Shimmishim

Originally posted by: VisableAssassin

Originally posted by: high
i am running at 2.5 at 1.85, should 1.9 be ok since I have good cooling?

1.9v is fine...the Model10 cores (Barton) are rated to an absolute max of 2.15v...but I wont run that high !
and shimm I wish I had a prommie

hehehe but what good is a prommy w/o a mounting kit?

i still need to get one... but i'll get one after i find one that can do 2.7 on air

I sitll wish I had a prommie tho
and if i can find a chip thatll do 2.7 on air..at like 1.8-1.85v ill pay for one !!!

 

[hytek369]

nice results

 

[VisableAssassin]

Originally posted by: hytek369
nice results

thanks
I want higher tho !

 

[essasin]

i had a chip that would do 200 x 12.5 @ 1.616 in bios on watercooling of course prime stable for 8 hours, just to get a toaster over at amdmb.

 

[Whitedog]

My 2600+ M is running 1.7 volts @200x12 with a 2700RPM fan.

 

[AWhackWhiteBoy]

i just noticed my barton is set to 1.9 in the bios,but MBM5 is reading 1.7,which would explain my lacking ability to OC.

1.9v for 2.4ghz seemed a bit steep, i have reasonable stepping and plenty of cooling. what the hell?

 

[AWhackWhiteBoy]

Originally posted by: MegaWorks

yeah but isn't that too high "voltage" for a CPU, I heard that people fried their CPU's that way

i've seen a few first generation bartons running 2volts for well over a year now.

 

[ectx]

Looks like you are priming on small fft tests? It is much more difficult to pass 24hr of blended test (or even more difficult using custome test and force large fft) than tio pass 24hr of small fft test.

 

[VisableAssassin]

Originally posted by: ectx
Looks like you are priming on small fft tests? It is much more difficult to pass 24hr of blended test (or even more difficult using custome test and force large fft) than tio pass 24hr of small fft test.

I use small FFTs since im testing the CPU not the ram. blend tests the CPU and ram...alot of ram
ever since ive had the NF7-S anything above 200mhz FSB gives me tons of errors in ram no matter what memory I use...be it my XMS 3200 or my XMS 4000 PRO...it only does it on this board...no other board...dont ask i dont know...Ill be lined up for another NF7-S soon to get ri dof that problem. So to get over that Ill test with small FFT's everytime.