• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

MSI nForce4 Neo4 "Ultra" owners - what ram are you using?

Running 1 GB PC 3200 OCZ EL Platinum Rev 2 Dual Channel here (2-2-2-5)

Built board on thursday, yet have not had a chance to install anything, waiting to do it tomorrow before the game.
 
Anyone know how the MSI K8N Neo4 compares with the DFI nForce 4 Ultra-D that Anand reviewed? They are around the same price, but the Neo4 is much more available.
 
Originally posted by: xjoe
Running 1 GB PC 3200 OCZ EL Platinum Rev 2 Dual Channel here (2-2-2-5)

Built board on thursday, yet have not had a chance to install anything, waiting to do it tomorrow before the game.
Click to expand...

Keep me updated. I want to go with low latency ram, but since the board is so new, I'm not sure which will work well with the mobo.

- Mike
 
Originally posted by: xjoe
Running 1 GB PC 3200 OCZ EL Platinum Rev 2 Dual Channel here (2-2-2-5)
Click to expand...

running the same thing on my ultra.
ive gotten my cpu 3200+ up to 4000+/FX53 speeds with 2-3-3-10-T1 settings.
hope to get it up to FX55 speeds tommorow after some tweaking. 😛
 
I'm using Crucial Ballistix PC-3200. Stock speed; will over clock once I have every thing cleaned up. This or the OCZ would be a very good choice for high end memory.

Crucial Ballistix

Specs:
Manufacturer: Crucial
Speed: DDR400(PC3200)
Type: 184-Pin DDR SDRAM
Error Checking: Non-ECC
Registered/Unbuffered: Unbuffered
Cas Latency: 2
Support Voltage: 2.8V
Organization: 64M x 64 -Bit
 
i dont think many people see a point using high end ram wiht A64 platform

im using patriot . . . $155 for 1GB
 
Another vote for the PC3200 Crucial Ballistix. Mine will run 2-2-2-7 at stock speeds and will go up to 280Mhz at 3-3-3-10 timings using the MSI Neo4 SLI board.
 
Crucial Ballistix PC3200 at 240 Mhz at 2.5-2-2-5 timings at 2.7V. I got the settings from this article:

http://www.anandtech.com/memory/showdoc.aspx?i=2145&p=9

These settings were stable for >9 hours with Prime95. They faltered at 250 Mhz at those settings.
This system was my first build and overclock, so I'm stoked, but progressing conservatively.

Elfear, what voltages are you using to hit 280Mhz at 3-3-3-10?
 
2x512 Pdpsys Patriot 3200+XBL CAS2 ram (TCCD)

runnig currently at 500MHz with 2.5-3-3-7 1T(1.7v)

Max I have been able to run so far is 600MHZ 3-3-3-8 1T (1.8v)
 
I'm running Patriot PDC1G3200LLK in my NEO4. It's 512mb x 2 running dual channel at 2-3-2-5 @ 400mhz. This ram doesnt seem very good for OCing at all... I tried bumping the voltages up to 2.85v but couldn't get it to run 2-2-2-5 and after 420mhz I get lockups, athlough I'm not sure if thats the entirely the memory.
 
I am running OCZ Gold Series Dual 1GB DDR PC-3200 at 2.8 volts. I have gotten it up to 2-2-3-8 1T at 230 FSB at 1:1 with no problems at all. I know I have lots more room to go up but right now something is keeping me from moving my FSB past 230 even if I slow the CPU and Memory way down and even with the HTT at 3x
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top