More cooling

[KouklatheCat]

What else can I do (not including peltier, water or refrigeration) can I do to cool my case etc?

My set up is as follows

Enlight 7237 case. Two Sunon High Output 80mm (42.5 cfm each) in front drawing air in. A 92mm Sunon (44 cfm) below the power supply exhausting, and a 92mm Sunon in the top. I have the AMD logo cut in the left (non mobo side) of my case. The logo is 7x7 and just above the factory slots so not too much modding is possible to this side. I have the ALPHA PAL6035 HSF with the Delta Fan.

What about a fan on the right (mobo side) of my case exhausting air out from the back of of the motherboad?

My CPU is at 39-40c (load) right now.

Any ideas appreciated...

 

[Mem]

That is well within normal range,why do you need better cooling?btw my own T-bird 900 is at 48C right now probably even higher with a 100% true reading ,you don`t see me worring over that.

 

[Mikewarrior2]

Is that your temp at 700 stock-clock?

Either way, your temps are just fine. If you don't have the back-exhaust fan area filled with a fan on the Enlight, I would personally install one.


Mike

 

[KouklatheCat]

I am not OC'd right now but I plan to soon. I do have the 92mm under the PS exhausting out.

 

[Mikewarrior2]

In that case, i wouldn't worry about adding more cooling.


Mike

 

[KouklatheCat]

Ok cool thanks. I am ordering the Digital Doc 3 with my Christmass bucks from grandma (33 years old and I still get a check from grandma ha ha)so I should know my accurate temps. I am waiting for the digital doc before I overclock.

Thanks again Mike you are a big help