• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

More cooling

K

KouklatheCat

Golden Member
What else can I do (not including peltier, water or refrigeration) can I do to cool my case etc?

My set up is as follows

Enlight 7237 case. Two Sunon High Output 80mm (42.5 cfm each) in front drawing air in. A 92mm Sunon (44 cfm) below the power supply exhausting, and a 92mm Sunon in the top. I have the AMD logo cut in the left (non mobo side) of my case. The logo is 7x7 and just above the factory slots so not too much modding is possible to this side. I have the ALPHA PAL6035 HSF with the Delta Fan.

What about a fan on the right (mobo side) of my case exhausting air out from the back of of the motherboad?

My CPU is at 39-40c (load) right now.

Any ideas appreciated...
 
That is well within normal range,why do you need better cooling?btw my own T-bird 900 is at 48C right now probably even higher with a 100% true reading ,you don`t see me worring over that.

🙂
 
Is that your temp at 700 stock-clock?

Either way, your temps are just fine. If you don't have the back-exhaust fan area filled with a fan on the Enlight, I would personally install one.


Mike
 
Ok cool thanks. I am ordering the Digital Doc 3 with my Christmass bucks from grandma (33 years old and I still get a check from grandma ha ha)so I should know my accurate temps. I am waiting for the digital doc before I overclock.

Thanks again Mike you are a big help
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top