• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Mobo upgrade..

T

topslop1

Senior member
I'm coming from a Ryzen 7 1700 on an ASRock X370 SLI/ac

After a fresh format and another 16gb of ram, computer will not carry me past booting up Windows before it shuts off.

I've pulled the ram, I've overvolted, I've reduced my overclock, no avail. This board never ran my ram at anything faster than 2800-2900mhz and had a hard time at that.

Time for an upgrade / replacement of the board, not quite ready to move (money wise) on a new processor.

Would a $100ish dollar X470 chipset board firstly support my chip, and be a good forward jump that would still support the new Ryzen's that are coming out in a few weeks?

Thought process is get the computer up and running with 3200mhz on the ram, enjoy it for a few months, and then put the money out for a new Ryzen chip later in the year.

Caveats?
 
Your issue could very well be the CPU not the motherboard. I would replace the CPU before the motherboard honestly, unless you are sure the motherboard is defective. What troubleshooting have you done?
 
The board may still be covered under warranty, so unless you just want to move to something else to run faster memory anyway I would just do that. Ran into a similar issue with my B350 board and the board that got sent back was totally fine.
 
Now you are thinking things through properly. One of my boxen has a Asrock x370 k4 and it would not run the ram at even the XMP profile OOB. Did the bridge BIOS then newest BIOS and was able to run the ram its rated speed. The first gen Ryzen are definitely finicky about ram, so if swapping boards or BIOS updates is not the answer, send the 1700 back to AMD and see if you do better in the silicon lottery.

And to be clear, you swapped ram, not added another 16GB, correct?
 
I did add another 16GB for a 32GB total (of same ram type but one mfg in 2017 and the other in 2019), but I pulled the new ram and kept the original 16gb in there to try to run the system stably again and still had issues. Stock clock, juiced voltages for both ram and proc and still not stable to boot.

Does point more towards a CPU than a motherboard issue doesn't it? I'm going to pull the battery on the mobo, reset things, and give it another go with the original 16gb.
 
topslop1 said:
The chip still under warranty after 2 ish years? I build this guy I think summer 2017.
Click to expand...
Retail boxed come with 3yr warranty so you should be able to get it replaced. And as to the troubleshoot, maybe? The IMC could be flaky now. Since that board is supposed to support Zen 2, if the CPU is the problem, a replacement will hold you over until you are ready to buy a new CPU.

Definitely the most economical upgrade path for you.
 
Yeah. I've had "iffy" ASRock AM4 boards (had one AB350M Pro4, kind of a cheap-o board, full-featured, but somewhat cheaply constructed, and later ASRock UEFI's never seemed fully stable. Or maybe I cooked it mining, and the VRMs became toast, and it's not ASRock's fault at all).

I would advise getting a new board, possibly a Gigabyte. That's what I did, and now I'm happy.

If you can, and don't want to shell out for new parts, try to get your existing ones RMA'ed.

Try clearing the CMOS first, though. And updating to the newest BIOS, or maybe one a few versions back, that had AGESA 1.0.0.6 (or 1.0.0.6a), those were some of the most stable for 1st-gen Ryzen CPUs.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top