• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Lapped my FX-8350, 4.3GHz OC'ed temps lowered by 9°C

Page 4 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
Well if Intel jumps off a bridge...

No wait that's not the right one.

I just assumed IDC was talking about the 8350, with AMD warranty is voided the moment you OC. Intel offers the performance tuning plan, though either way I don't think IDC cares because rich.
 
BallaTheFeared said:
Well if Intel jumps off a bridge...

No wait that's not the right one.

I just assumed IDC was talking about the 8350, with AMD warranty is voided the moment you OC. Intel offers the performance tuning plan, though either way I don't think IDC cares because rich.
Click to expand...

http://support.amd.com/en-us/warranty/pib/step2

Reading comprehension goes a long way in life.

BallaTheFeared said:
Fraud isn't something we approve of 'round here.
Click to expand...

What's fraudulent? The processors are UNLOCKED. That entire market buys unlocked processors to, *gasp* overclock. Warranties on AMD are valid unless you damage the chip, doesn't matter if the clock speeds have been increased.
 
if it´s not damamged, what will you need the warranty for?

the paperwork states that overclocking voids the warranty,
so that´s that
 
Blamblooga said:
http://support.amd.com/en-us/warranty/pib/step2

Reading comprehension goes a long way in life.



What's fraudulent? The processors are UNLOCKED. That entire market buys unlocked processors to, *gasp* overclock. Warranties on AMD are valid unless you damage the chip, doesn't matter if the clock speeds have been increased.
Click to expand...
That is not true.....sure its common knowledge that over clocking does take place! But the fact remains over clocking most of the time voids the warranty!
 
Blamblooga said:
http://support.amd.com/en-us/warranty/pib/step2

Reading comprehension goes a long way in life.
Click to expand...
So does the ability to find the actual web page you're looking for: http://support.amd.com/en-us/warranty/rma/terms/pib

This limited warranty does not cover damages due to external causes, including improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
Click to expand...
I do believe overclocking would fall under "alteration." Case closed.
 
Homeles said:
So does the ability to find the actual web page you're looking for: http://support.amd.com/en-us/warranty/rma/terms/pib


I do believe overclocking would fall under "alteration." Case closed.
Click to expand...

Check this out.
This Limited Warranty shall be null and void if the AMD microprocessor which is the subject of this Limited Warranty is used with any heatsink/fan other than the one provided herewith.
Click to expand...
Well that pretty much voids any enthusiasts CPU right from the start regardless of any OCing. I had no idea.
 
Homeles said:
So does the ability to find the actual web page you're looking for: http://support.amd.com/en-us/warranty/rma/terms/pib


I do believe overclocking would fall under "alteration." Case closed.
Click to expand...

Pretty sure they would just state "improper use" instead, since it's a catch-all from which the consumer has no legal defense whatsoever.

All warranties should be taken as moral contracts instead of legal ones in the USA.

If they don't what to honor the warantee for any reason whatsoever, or even no reason at all, they will, and there is absolutely nothing you can do about it.
 
Last edited:
Anyway, to close it up:

WARNING AMD and ATI processors are intended to be operated only within their associated specifications and factory settings. Operating your AMD or ATI processor outside of specification or in excess of factory settings, including but not limited to overclocking, may damage your processor and/or lead to other problems, including but not limited to, damage to your system components (including your motherboard and components thereon (e.g. memory)), system instabilities (e.g. data loss and corrupted images), shortened processor, system component and/or system life and in extreme cases, total system failure. AMD does not provide support or service for issues or damages related to use of an AMD or ATI processor outside of processor specifications or in excess of factory settings. You may also not receive support or service from your system manufacturer.
DAMAGES CAUSED BY USE OF YOUR AMD OR ATI PROCESSOR OUTSIDE OF SPECIFICATION OR IN EXCESS OF FACTORY SETTINGS ARE NOT COVERED UNDER YOUR AMD PRODUCT WARRANTY AND MAY NOT BE COVERED BY YOUR SYSTEM MANUFACTURER’S WARRANTY.
Click to expand...
Overclocking voids warranty. As common sense would also state...
 
Last edited:
Idontcare said:
To reduce the loading effect on the sandpaper, I wet-sand with 220 and 400 grits and dry-sand with the remaining grits (800-3000).
Click to expand...

What does this mean? I lapped a Q6600 many years ago and I followed a detailed guide, but I dont remember reading anything like this.
 
Blamblooga said:
Prove it.
Click to expand...

i don´t have to
i don´t try to return cpus/gpus that i fried when overclocking
(never actually fried one, though)

either you have the guts to gamble with possible loss, or you don´t (it´s part of the thrill :biggrin🙂

or you try to sneak it back to the manufacturer, even though it had been "used out of specification..."
 
I have little to add here, except to agree there's something less beneficial to lapping with an IB (or Haswell?) chip unless you replace the TIM and get better contact between the IHS and processor.

The benefits (otherwise) in degrees-C vary slightly with the TDP of the processor given its OC'd speed.

While some benefits arise from simply imparting a flat surface to the IHS, I'm inclined to the idea that it is the removal of the nickel-plating that has the greater effect. To get there, you would certain assure a flat surface.

Also, despite efforts here and there to get a mirror polish on the IHS, it's comforting to see the OP holds my position on the matter. Once you've done the finishing with a 600- or 800-grit paper, additional work is wasted.
 
BallaTheFeared said:
It was in my AMD processor warranty documentation.

Overclocking the AMD cpus voids the warrant, and using aftermarket coolers voids it as well.

This shouldn't have even been a discussion...
Click to expand...

We can't all be as smart as you Balla. 😛
I for one didn't realize using aftermarket coolers would void the warranty. That's virtually all of us, assuming Intel has a similar restriction, which makes warranty arguments a moot point.
 
yeah, the cooler thing is crazy,

that one wouldn´t keep me from returning to sender, if a cpu died on me without oc, but better cooler than the stock thing
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top