• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

LANPARTY NFII ULTRA B not booting to BIOS

V

Vivitron

Junior Member
My friend has just recently put together a new comp. Its a LANPARTY NFII ULTRA B mobo with an AMD Athlon XP 3200+ chip. Everything is in for sure, and everything is hooked up correctly. Just for reference, he's running 512 of Corsair Value Select RAM in DIMM slot 1. We didn't get any post beeps on power up, just a blank screen and all 4 of the diagnostic LEDs were lit with all fans and power running. Any suggestions?
 
How about some more specs, including the brand & model of power supply if possible 🙂
 
These boards are notorios for booting problems, check in the Bios and make sure Super Bypass is ENABLED. Its under the sections with the mem timings ect. This will make my boards unbootable, Also make sure youre not running in you FSB/Memory in Async, some BIOS's dont like it.

If its a new board reset the CMOS via the jumper, i have this board and had to clear CMOS to get it to boot the first time i used it.
 
Originally posted by: Vivitron
It's a Power Lab 480W power supply.
Also installed is a PNY Geforce4 Ti4200 64mb vid card.
Click to expand...

That powerlab is probably one of the weeknesses. Would you mind giving us the specs written on the side make sure to include the Amps on the 12V rail.

-Kevin
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top