i overclock my opteron,my cpu temp drop 3 c

yingyan

Member
Aug 2, 2005
181
0
0
i overclock my opteron 165 to 2.2 ghz!!after 24hr prim95 stable,i stop the test, my cpu use to run 40c, after i overclock to 2.2 ghz,everthing is on auto, i only rasie the htt, now the temp is 37c, how does that happen?
 

mrkun

Platinum Member
Jul 17, 2005
2,177
0
0
You really don't need to be Priming an Opty at 2.2 GHz. With that CPU I would start at like 2.7 then just keep raising the voltage until it's stable.
 

Avalon

Diamond Member
Jul 16, 2001
7,571
178
106
Originally posted by: mrkun
You really don't need to be Priming an Opty at 2.2 GHz. With that CPU I would start at like 2.7 then just keep raising the voltage until it's stable.

No, you don't need to start by jumping your chip up to 2.7ghz, since a lot of Opterons lately can't even do 2.7 at stock/low voltage. I would continue to overclock incrementally.

Also, I tend to notice that after overclocking 400-600mhz, if at same voltage, my temps will start going down as well. It's the AS5 filling out.