I need to reboot my ceiling fan.

Squisher

Lifer
Aug 17, 2000
21,204
66
91
I've got a Hampton Bay ceiling fan that spontaneously started running in
the wrong (winter) direction when I turned it on the other day to dry some
carpeting I had cleaned. From what I understand after talking with the
supplier (through Home Depot) is that it originally came with a wired remote
that had a button that reversed the motor, for summer/winter setting. I
guess the previous owner of the house installed it with a Hampton Bay
wireless remote rather than running a wire to a wall switch. I also assume
that some sort of voltage spike/gremlin caused the internal brain of the fan
to go into winter setting. The tech guy said to try to force the blades to
go in the right direction and turn it on. This failed repeatedly. He also
said to switch the fan off and on quickly, but there is no direct connection
between the switch and fan, so I did try to disconnecting the power to fan a
couple of times. This failed too. The only thing I can think of to do now
is to try this with the hot wire going down the down rod, but I'll probably
want to take off the blades seeing that I'll be doing this up by a 13'
ceiling. Or, I guess I could purchase a replacement wired transmitter and
receiver and hook it up for just a minute so as to allow me to reset the
motor direction.

Any other suggestions?

-----------------------------------

Update: nothing worked. I tried leaving the power off for a while. I tried hooking it up backwards (neutral to line/line to neutral) both before and after the receiver. Swapped in another wireless receiver.

I called the supplier of the fan and got the part numbers for the wired wall controller and receiver, and then called Home Depot for a price because the supplier doesn't do retail.

$149.99!!!!:Q

There is only one wired wall controller on ebay and it isn't the one I need (with a button for summer/winter) and no receivers.


Time to get a new fan.


EDIT: Oh yeah, Home Depot said they'd give me a $50 gift card for my pain.


EDIT #2: SUCCESS!!

I had to spin the fan in the right direction, then turn it on, then had to have the daughter cycle the breaker twice. WOOT

 

Capt Caveman

Lifer
Jan 30, 2005
34,543
651
126
Have you tried powering off the ceiling fan from the Electric panel to see if that resets it.

Another option would be to buy a replacement remote. You will need to access both ceiling fan and remote to set both of them to the same dip switch setting.
 

BassBomb

Diamond Member
Nov 25, 2005
8,390
1
81
Originally posted by: MrChad
There's not a switch on the unit to change direction?

this!?!

ive had remote ones with the manual switch still existing
 

OUCaptain

Golden Member
Nov 21, 2007
1,522
0
0
Originally posted by: BassBomb
Originally posted by: MrChad
There's not a switch on the unit to change direction?

this!?!

ive had remote ones with the manual switch still existing

The three I installed for the folks didn't. Easy way to reset it though, just flip the breaker for a few minutes.
 

Mr Pickles

Diamond Member
Feb 24, 2006
4,103
1
0
Layer 1: Is the fan plugged in? And hey. How did your post just randomly stop half way through the page instead of spanning all the way across?

:sun:
 

iamwiz82

Lifer
Jan 10, 2001
30,772
13
81
Hmm... I thought word wrap removed the need to hit the Enter key for each line. I must be crazy ;)
 

So

Lifer
Jul 2, 2001
25,923
17
81
Originally posted by: Mr Pickles
Layer 1: Is the fan plugged in? And hey. How did your post just randomly stop half way through the page instead of spanning all the way across?

:sun:

There's this magical key to the right of your quote key called "enter"
 

Modelworks

Lifer
Feb 22, 2007
16,240
7
76
Probably going to require the remote to change the mode if their is no switch on the fan. If its in clockwise mode and that is the default mode, then toggling the breaker isn't going to change that. Probably defaults to summer mode, doubt they put an eeprom or backup power in the fan to store the last used direction information. But if its stuck in winter mode, sounds like some electronics are screwed.

 

cerebusPu

Diamond Member
May 27, 2000
4,008
0
0
try the turning the power off from the breaker first. after that find the model number and look for a manual.
 

Squisher

Lifer
Aug 17, 2000
21,204
66
91
Originally posted by: Mr Pickles
......And hey. How did your post just randomly stop half way through the page instead of spanning all the way across?

:sun:

Copy and pasted from a post I already had made on the newsgroup alt.home.repair

 

Squisher

Lifer
Aug 17, 2000
21,204
66
91
Originally posted by: Blieb
Get the model number and search for manual online.

Profit.

If it is Hampton Bay, your only recourse is to call Home Depot and then conference call with a tech. They don't want you to know that all their stuff is rebranded stuff.

I did this.

Tech said to try turning it off and on quickly or forcing the blades in the direction that you want and turning it on. Both were major fail.

This is the first fan I've seen without a manual switch, but the tech said it is the way they do it sometimes.

 

Viper GTS

Lifer
Oct 13, 1999
38,107
433
136
Is it an IR remote? Do you have a Harmony (or a friend with a harmony)?

If so Logitech probably has the codes for it.

Viper GTS
 

Squisher

Lifer
Aug 17, 2000
21,204
66
91
Originally posted by: Evadman
model number please.

AC 552A
sku# 312-575

Hampton Bay, DeLano (sp?)


Because it is discontinued the tech emailed me a pdf of the manual for another similar model.
 

Rumpltzer

Diamond Member
Jun 7, 2003
4,815
33
91
Originally posted by: Squisher
Originally posted by: Mr Pickles
......And hey. How did your post just randomly stop half way through the page instead of spanning all the way across?

:sun:

Copy and pasted from a post I already had made on the newsgroup alt.home-repair

So you're admitting that ATOT wasn't your first choice of home repair forums??! :frown:
 

Squisher

Lifer
Aug 17, 2000
21,204
66
91
Update: nothing worked. I tried leaving the power off for a while. I tried hooking it up backwards (neutral to line/line to neutral) both before and after the receiver. Swapped in another wireless receiver.

I called the supplier of the fan and got the part numbers for the wired wall controller and receiver, and then called Home Depot for a price because the supplier doesn't do retail.

$149.99!!!!:Q

There is only one wired wall controller on ebay and it isn't the one I need (with a button for summer/winter) and no receivers.


Time to get a new fan.



EDIT: Oh yeah, Home Depot said they'd give me a $50 gift card for my pain.

 

MichaelD

Lifer
Jan 16, 2001
31,528
3
76
If you don't have a receipt/valid warranty for the fan, just replace the damn thing. That fan sold for $150, new. It was really worth about $50 and now that it's used, the amount of energy to take it down is worth more than it's scrap value. Buy a new fan. Register the warranty. Keep your receipt. Etc. Etc. and more etc.
 

TheBloodguard

Senior member
Nov 5, 2002
399
0
0
Problems with your Hampton Bay fan
First and foremost, Hampton Bay ceiling fans have a lifetime warranty. Since they are the house brand of Home Depot, and sold only in Home Depot stores and websites, Home Depot honors the Hampton Bay warranty. So if your fan breaks or fails, often times the easiest solution is to return the fan to Home Depot for a full replacement under warranty.

Won't they replace it under warranty? I had a fan failed ( different manufacturer ) for a bad ballast a few days ago. It was 5 years old and I didn't have a receit but since they didn't make replacement parts anymore they shipped me a new (different model ) one. I had to pay shipping for the return of the old one but maybe Home Depot would do the exchange.
 

jlee

Lifer
Sep 12, 2001
48,518
223
106
Originally posted by: TheBloodguard
Problems with your Hampton Bay fan
First and foremost, Hampton Bay ceiling fans have a lifetime warranty. Since they are the house brand of Home Depot, and sold only in Home Depot stores and websites, Home Depot honors the Hampton Bay warranty. So if your fan breaks or fails, often times the easiest solution is to return the fan to Home Depot for a full replacement under warranty. [/b]


Won't they replace it under warranty? I had a fan failed ( different manufacturer ) for a bad ballast a few days ago. It was 5 years old and I didn't have a receit but since they didn't make replacement parts anymore they shipped me a new (different model ) one. I had to pay shipping for the return of the old one but maybe Home Depot would do the exchange.
The fan isn't broken. :confused:
 

RGUN

Golden Member
Dec 11, 2005
1,007
3
76
Seems to me like the logical solution is to disassemble to fan, reinstall upside down... repeat seasonally as required.