I have my new e7200 installed with the OCZ Vendetta 2 cooler! ***OC Update***

[Serradifalco]

Originally posted by: Hazaro
More volts!

400FSB wall is blasphemy.

My new Coolermaster 690 case arrived today. I will push it further once its in the new case with lots of 120mm fans.

 

[Serradifalco]

***Update***

Everything is installed in my new case. I am now stable at 3.9Ghz at 1.275v in the bios. I had to bump the fsb voltage + 0.2v. No matter how high I bumped the cpu voltage, I couldn't get stability. I finally became stable only when I bumped the fsb voltage. I will try lowering the cpu volatge today. I think I can achieve stability at lower voltages. This chip is pretty amazing! I will soon venture in to 4Ghz land!

FYI... my last stable oc prior was 3.8Ghz at 1.2375v in the bios.

 

[error8]

Originally posted by: Serradifalco
***Update***

Everything is installed in my new case. I am now stable at 3.9Ghz at 1.275v in the bios. I had to bump the fsb voltage + 0.2v. No matter how high I bumped the cpu voltage, I couldn't get stability. I finally became stable only when I bumped the fsb voltage. I will try lowering the cpu volatge today. I think I can achieve stability at lower voltages. This chip is pretty amazing! I will soon venture in to 4Ghz land!

FYI... my last stable oc prior was 3.8Ghz at 1.2375v in the bios.

First of all, I want to say that I hate you. :laugh:

I'm at 3,9 ghz with 1,4 V in bios and 1,34 V full load ( cpu-z), dam it 🙁 .
You've got yourself one of the best E7200 chips out there.
What are your temperatures at this speed?

 

[Serradifalco]

Originally posted by: error8

Originally posted by: Serradifalco
***Update***

Everything is installed in my new case. I am now stable at 3.9Ghz at 1.275v in the bios. I had to bump the fsb voltage + 0.2v. No matter how high I bumped the cpu voltage, I couldn't get stability. I finally became stable only when I bumped the fsb voltage. I will try lowering the cpu volatge today. I think I can achieve stability at lower voltages. This chip is pretty amazing! I will soon venture in to 4Ghz land!

FYI... my last stable oc prior was 3.8Ghz at 1.2375v in the bios.

First of all, I want to say that I hate you. :laugh:

I'm at 3,9 ghz with 1,4 V in bios and 1,34 V full load ( cpu-z), dam it 🙁 .
You've got yourself one of the best E7200 chips out there.
What are your temperatures at this speed?

37c idle/ 55c load

 

[error8]

If I were you, I'd push it higher. Until 1,36 V , maximum voltage that Intel gives for this chip, you have a lot of space. I'd say that you can hit 4,3-4,5 ghz at 1,36 V.