Originally posted by: Elfear
Ok, I tried MAL = 9, Preamble = 7, Drive Strength = Weak, Chipset Voltage = 1.8V, and LDT Voltage = 1.4V. It seems to be the most stable at those settings with the rest being the same as
this screenshot. By "most stable" I mean it will pass 7 minutes of SuperPi 16M. SuperPi 8M seems to be hit and miss at those settings, sometimes it passes sometimes not. This is at 310x10 1.55V. More vcore doesn't seem to do anything.
I also tried the following with a subsequent loss of stability:
1) 133 divider (310x10)
2) 2T command rate
3) Bypass Max = 7x
4) Dram voltage = 2.8V
5) Idle Cycle Limit = 16 clks
6) Cycle Counter = Enabled
7) Trfc = 15
I seem to be a bit limited on my HT headroom too. With no real load on the cpu (8x multi) I can get the HT up to 325MHz (OCCT stable) before it poops out. 330MHz is completely unstable. I always thought the DFI boards were good at 350+ but maybe with the extra load SLI puts on the chipset I'm being limited.