• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

help please mobile a64

T

triscross

Member
i have just taken the step into a dtr system i have just got a ATHLON 3000 1.8- 64 BIT-AMA3000BEX5AP chip a DFI LANPARTY UT nF3 250Gb MOTHERBOARD and a Akasa Evo 120 Quiet CPU Cooler
Ijust wanted to know if this would work and what i should know before putting it together ie bios settings
thanks everyone here i got all my info from you i wil be switching it on tonight and i dont want to blow it up pleas help
 
Pay attention to the heatsink contact. Your mobile doesn't have the normal heatspreader on top, so the cpu die (where the heatsink makes contact) sits lower than a regular athlon 64. Some folks remove the 4 bumps on the corner of the plastic heatsink bracket so the heatsink sits closer to the cpu for better contact. The default cpu voltage should be around 1.2 or less for a mobile. Your board may not recognize the cpu, and read "unknown cpu" when posting. That's ok. If it does, check your settings. Your cpu fsb should be 200, and the memory should be at 166 (pc2700) or 200 (pc3200).
 
i have removed the retention bracket and mounted it with the springs that came with the heatsink i hope that will be o.k. because i have don it now .thanks for the tip very happy now
 
i need help now my pc is up and runing the cpu is at 1.07v and fsb is set at 200 in the bios. In windows system the cpu speed reads 800 is this right or have i set something wrong please someone help
 
Originally posted by: o1die
Pay attention to the heatsink contact. Your mobile doesn't have the normal heatspreader on top, so the cpu die (where the heatsink makes contact) sits lower than a regular athlon 64. Some folks remove the 4 bumps on the corner of the plastic heatsink bracket so the heatsink sits closer to the cpu for better contact. The default cpu voltage should be around 1.2 or less for a mobile. Your board may not recognize the cpu, and read "unknown cpu" when posting. That's ok. If it does, check your settings. Your cpu fsb should be 200, and the memory should be at 166 (pc2700) or 200 (pc3200).
Click to expand...


Removing the four bumps wont do anything without grinding down the screwpegs as well.
 
I think your CPU is running at the lowest P-state possible (4x multiplier, 1.1v) so either you have cool and quiet enabled (in the bios) or your motherboard needs a bios update.
 
hi i have updated the bios from the link off this site off in motherbords for a 64 i have just looked and it is dated 2004! i am going to look for a newer one because that made no diffrence
I cant find cool and quiet in the bios
thankyou for your help
 
1.20v 1.8G all up and runing fine now i had to set bios up myself all the auto settings did not work. the code on my cpu amd says it should run 1.4v AMA3000BEX5AP is this wright allso can any one tell me the limits of this chip it seems it will be good for 2.2G
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top