GOT MY AM2 CPU :)

[arcenite]

as an amd fan I can officialy say I don't care unless you have some sort of super-am2 that wipes the floor with the other boring processors, you can keep it op :thumbsdown:

 

[Henny]

It's going to be tough for AMD. Intel's changing the rules and making dual core the std. Intel can do this since they have multiple 65nm/300mm factories in full swing.

For AMD, dual core requires about 2X the silicon and their capacity is already stretched pretty thin. They are also behind in 65nm technology. Dual core for AMD stresses their capacity and cost structure big time.

 

[JAG87]

metro, as soon as you get a mobo, please im begging you, take a picture of the bios and post it. Im dying to know HTT, multipliers and voltage for these things.

 

[the Chase]

Originally posted by: JAG87
metro, as soon as you get a mobo, please im begging you, take a picture of the bios and post it. Im dying to know HTT, multipliers and voltage for these things.

Heh- 65nm Brisbane's still dancing through your mind? Mine too....

 

[Xpage]

AMD sells it's DC chips ata premium because they take up more die space than a single core chip and AMD can make mor eprofit on it, so why shoot itself in the leg until it really needs too. AMD is limite dby its capacity that it can produce about 30000 wafers per month, thus you want to make the most profit per chip

 

[Metr0]

voltage is 1.3 or 1.35v depending on am2 model for x2 4000+ is only 1.3v

mobo has been shipped

 

[the Chase]

Awesome. Looking forward to any info you can give us. What memory are you going to be using with this?

 

[bjc112]

ps - who's ass is that in EdUaRdO65's avatar? :Q

 

[Metr0]

Originally posted by: bjc112

ps - who's ass is that in EdUaRdO65's avatar? :Q

dont know mate, from some pron site i guess?? i can ask him

 

[Mogadon]

Can you tell us what mobo or manufaturer it is ... .

 

[Metr0]

Originally posted by: Mogadon
Can you tell us what mobo or manufaturer it is ... .

the board i will get??

1st reference card from nvidia arriving on tuesday
2nd epox
3rd gigabyte
4 ECS
5 ATI rd580 reference

regards

 

[the Chase]

Originally posted by: Metr0

Originally posted by: Mogadon
Can you tell us what mobo or manufaturer it is ... .

the board i will get??

1st reference card from nvidia arriving on tuesday
2nd epox
3rd gigabyte
4 ECS
5 ATI rd580 reference

regards

wow- you're going to be one busy man. What memory are you going to run? DDR2 667 or DDR2 800? or even DDR2 533?

 

[Metr0]

Originally posted by: the Chase

Originally posted by: Metr0

Originally posted by: Mogadon
Can you tell us what mobo or manufaturer it is ... .

the board i will get??

1st reference card from nvidia arriving on tuesday
2nd epox
3rd gigabyte
4 ECS
5 ATI rd580 reference

regards

wow- you're going to be one busy man. What memory are you going to run? DDR2 667 or DDR2 800? or even DDR2 533?

i have a kit of ocz and corsair to use, ddr2 667 and ddr2 800 but i'm getting soon some better unannounced ram

 

[the Chase]

Originally posted by: Metr0

Originally posted by: the Chase

Originally posted by: Metr0

Originally posted by: Mogadon
Can you tell us what mobo or manufaturer it is ... .

the board i will get??

1st reference card from nvidia arriving on tuesday
2nd epox
3rd gigabyte
4 ECS
5 ATI rd580 reference

regards

wow- you're going to be one busy man. What memory are you going to run? DDR2 667 or DDR2 800? or even DDR2 533?

i have a kit of ocz and corsair to use, ddr2 667 and ddr2 800 but i'm getting soon some better unannounced ram

hhhmmm....Don't tell me nn_step has been right this whole time....Not that I would mind.

Good luck with the set-up and testing.

 

[Metr0]

Originally posted by: the Chase

Originally posted by: Metr0

Originally posted by: the Chase

Originally posted by: Metr0

Originally posted by: Mogadon
Can you tell us what mobo or manufaturer it is ... .

the board i will get??

1st reference card from nvidia arriving on tuesday
2nd epox
3rd gigabyte
4 ECS
5 ATI rd580 reference

regards

wow- you're going to be one busy man. What memory are you going to run? DDR2 667 or DDR2 800? or even DDR2 533?

i have a kit of ocz and corsair to use, ddr2 667 and ddr2 800 but i'm getting soon some better unannounced ram

hhhmmm....Don't tell me nn_step has been right this whole time....Not that I would mind.

Good luck with the set-up and testing.

no he hasnt it is ddr2 un announced ram

 

[the Chase]

ARrrgg...bummer. Oh well, thanks for the reply- hope your mobo makes it to you safe and sound tommorrow.

 

[TrevorRC]

Originally posted by: Duvie
Well then drop it to 1.6ghz or get the dual core semprons out...

That POS 805 at a pathetic 2.66ghz and 533fsb is getting huge sales showing there is a market for low speed dual cores....

A problem would still be manufacturing costs.

They'll pay the same to make a 3800+ as a '3400+' [1.6].

The process is now mature enough that most likely the majority of chips meet the bottom line. Anything lower, and they're just downbinning chips unnecessarily.
--Trevor

 

[Proletariat]

Originally posted by: Megatomic
Do you have a motherboard for that chip Metr0? If so, when shall we see some results?

ps - who's ass is that in EdUaRdO65's avatar? :Q

Holy god yes, I don't even know what else was in that link

 

[Metr0]

mobo arrived today to chile but is trapped in customs tomorrow i will rescue her

 

[the Chase]

Good news- the time is getting closer....

 

[Xpage]

i cannot wait for some answers...

 

[gorka]

ask EdUaRdO65 for the motherload....i mean the motherboard.

buenas suerte tio!

 

[nycdude]

Originally posted by: Thor86
Woohoo, new hardware! Keep the info coming.

 

[ForumMaster]

:whimper...whimper; :wah!!!; i want one too! where? how much? specs?

 

[the Chase]

So how is the memory tweaking going? Any specs you can give us on the 4000 model? Core, cache, bus speed, etc.