• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

got my 2100+ Tbred 5 mins ago! 1 more question

G

gistech1978

Diamond Member
okay guys can you help me out with this.
the black sticker says

AXDA2100DUT3C
AIUHB 0301MPMW

what does that mean....
is this a "good" or "bad" one.
its green. im not even sure if i wanna OC quite yet. im sure i'll be happy either way, "good" or "bad"
thanks.
 
thanks for the quick response bigJ
man...too bad im @ work
*cough cough* i think im feeling under the weather and need to take some sick leave.
yeah.....thats the ticket
hehehehehe
😀
 
Originally posted by: ChampionAtTufshop
go oc that shizz and tell us how it goes
i think ive read that 2003 chips arent doing as well....but i could be wrong 🙂
Click to expand...

My sig is a 2003 chip 🙂
 
would u guys recommend gettin a 2100+ chip OEM from newegg.com ?

and would it be the palomino or the Thorougbred i would want...

also last question.. swear...

what HSF to overclock?

thanks
 
Originally posted by: mattford11
would u guys recommend gettin a 2100+ chip OEM from newegg.com ?

and would it be the palomino or the Thorougbred i would want...

also last question.. swear...

what HSF to overclock?

thanks
Click to expand...

1) yes

2) Thoroughbred B

3) Thermalright SLK-800 w/80mm fan (at least 30cfm for decent o/cing) or Swiftech MCX-462+ if you like mounting hardware
 
Originally posted by: tbates757
Originally posted by: mattford11
would u guys recommend gettin a 2100+ chip OEM from newegg.com ?

and would it be the palomino or the Thorougbred i would want...

also last question.. swear...

what HSF to overclock?

thanks
Click to expand...

1) yes

2) Thoroughbred B

3) Thermalright SLK-800 w/80mm fan (at least 30cfm for decent o/cing) or Swiftech MCX-462+ if you like mounting hardware
Click to expand...

or the Thermalright SLK-900😀.But you'll need the 4 mobo mounting holes.You can try Thermaltake's Volcano 11.But i doubt it will be better than the SLK-900(or maybe the 800),but it doesn't need the 4 mounting holes
 
Hey GIStech, assuming your handle means what I think it means, it is good to see another GISc person (probably many more given the number of members). I worked for several years as a GIS analyst and then ended up managing a GIS lab for awhile. I continue to rely on GIS and RS tools almost daily, but now I'm focused back on my ecology research nterests.

How's your TbredB running for you? Mine was rocking until the PSU died (at least that's the current working hypothesis). I'm new to this build it from the ground up and OCing stuff. Ton 'O fun when the system run...
 
Hi guys,

Am I correct to say that if the chip ID (??) ends with DUT3C, it *should* be a TBred B?
 
Originally posted by: bgeh
yes. but we do not know about barton yet
it might use the same voltage
Click to expand...

Thanks. That'll just make my hunt for those chips easier 😉
 
going to low yat?
i went there last month and found a few of them
you should find many
good luck

🙂
 
Yups. But not this weekend though. Many of the shops are still closed for CNY. You found TBred B??? If so, did you get one yerself?
 
had no money and i'm still broke
my parents do not allow me to buy any computer stuff until the next PC Fair(April)🙁
but hey, i might just get a cheap Barton😀
 
Many of the 2003 week 1 and 2 chips are doing 2500mhz with 1.85 volts. Should do at least 2600+ speeds at default voltage.
 
hey guys,
what should my cpu bus speed be for this chip?
ive built older systems but the DDR and stuff kind of passed me by.
okay, i have pc2700 RAM, which i run @ 166mhz*2(that is what DDR does, correct?) that gives me the 333 right?
what about cpu bus, i did have the RAM @ 166 and the cpu @ 133, but then i lowered the multiplier and raised the cpu bus to 166
is this going to damage anything? its roughly the same clock speed as before and its stable, its ran DF all night and not crashed once.
so basically what im asking is...
with my RAM and my Tbred B what should my multiplier and bus speed be?
im not really that interested in OCing @ this point, im happy with the increase in speed ive already gained.
thanks
 
Originally posted by: bgeh
had no money and i'm still broke
my parents do not allow me to buy any computer stuff until the next PC Fair(April)🙁
but hey, i might just get a cheap Barton😀
Click to expand...

Well, you can always work part time in McD's or something 😉

A cheap Barton? I don't think so dude 😛
 
Originally posted by: ugh
Originally posted by: bgeh
had no money and i'm still broke
my parents do not allow me to buy any computer stuff until the next PC Fair(April)🙁
but hey, i might just get a cheap Barton😀
Click to expand...

Well, you can always work part time in McD's or something 😉

A cheap Barton? I don't think so dude 😛
Click to expand...

Part time in Mcds for Rm3.50 an hour?? You're gonna be old before you get a Barton at that rate.
 
Originally posted by: pillage2001
Originally posted by: ugh
Originally posted by: bgeh
had no money and i'm still broke
my parents do not allow me to buy any computer stuff until the next PC Fair(April)🙁
but hey, i might just get a cheap Barton😀
Click to expand...

Well, you can always work part time in McD's or something 😉

A cheap Barton? I don't think so dude 😛
Click to expand...

Part time in Mcds for Rm3.50 an hour?? You're gonna be old before you get a Barton at that rate.
Click to expand...

OMG! They're still paying soooooooo low? Damn, it would be better to be a salesman/technician in Low Yat/Imbi or any other computer shops 🙂
 
Originally posted by: ugh
Originally posted by: pillage2001
Originally posted by: ugh
Originally posted by: bgeh
had no money and i'm still broke
my parents do not allow me to buy any computer stuff until the next PC Fair(April)🙁
but hey, i might just get a cheap Barton😀
Click to expand...

Well, you can always work part time in McD's or something 😉

A cheap Barton? I don't think so dude 😛
Click to expand...

Part time in Mcds for Rm3.50 an hour?? You're gonna be old before you get a Barton at that rate.
Click to expand...

OMG! They're still paying soooooooo low? Damn, it would be better to be a salesman/technician in Low Yat/Imbi or any other computer shops 🙂
Click to expand...


I don't know. They pay pretty good money in Mcds over at the States. 🙂
 
I don't know. They pay pretty good money in Mcds over at the States. 🙂
Click to expand...

It's totally different in the states 😉 Actually heard that some college kids do direct selling to get more marnee.

Darn, this is getting really OT...
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top