Got an Epox NForce2 board? Nero locking you up? I have THE solution! (really)

[MichaelD]

*edit*
May I be so bold as to request a sticky? I really think this can help a lot of people.

I despise spending big bucks on super-duper blazing fast uber cool hardware...and then it doesn't work right, or at all with other hardware and/or software...that just sucks.

The problem: You have an Epox NForce2 board. You install it, load up the OS and the NForce drivers. You load SP2 OR SP3. After 2K reboots, you're up and running. GOD, this thing is fast! Then you load Nero. You click Nero, and as it gives you the dialogue box "Scanning IDE/SCSI Bus...."the system hard locks. You try again. And again. You utter words of crass that even you didn't know you knew. You then utter the age-old hardware junkies' mantra:

W_T_F!!!!!!

What to do? I am not the expert, but hey, I fixed this problem...with some help. Hooray for me.

I want to help those who will invariably have the little-known now, but soon-to-be almost world-known problem concerning Nero hard locking the system when being run on an NForce2 board.

First off, credit must be given to whom it's due; MechBgon suggested via email "I assume you've tried a Nero update?" Referring to my NForce2/Nero probs posted in this thread, here.



For the record, here is my complete configuration:

1. Epox 8RDA+
2. XP1600 (at 10.5x166=1740MHz...stock 1.75v voltage)
3. 512mb stick of Crucial PC2700 (*side note* but a 512mb stick of Corsair PC3200 CAS2 is going in there when I get my B TBred. )
4. W2K SP3 (+ all the Critical Updates off Microsoft's autoupdate site)
5. NVidia NForce V2.0 unified driver pack. (Just ran the executable and let it do it's thing.)
5. Antec Trupower 430 PS



In that thread, many very knowledgeable folks offered suggestions that supposedly HAVE worked for other folks...not knocking anyone (you guys are all super! ), but I tried all the suggested fixes to no avail.

I tried rejumpering the HD, the optical drives. I tried this as master, that as slave, switched channels, tried the NForce 2.0 drivers, tried the ones off the board's CD, tried mixing and matching, uploaded that new ASPI layer thing, held a dead chicken in my left hand and waved a head from a GI Joe doll over the case...all that crap. Nada. Not anything different.

What worked?

Applying a FREE update to Nero! Specifically, updating to Nero 5.5.10.0 For the record, I have Nero v.5.5.7.2 that came bundled w/my Lite-On CDRW. On Nero's page here,

Important Installation Information
This file can be used as a free Nero demo version, if you didn't have Nero installed previously, or as an update from an older version of Nero. In case of an update the software will detect whether you are entitled to a free update or not.

So, whether this will work with *cough*hacked*cough* copies of Nero...I dunno; that's your problem.

But, I downloaded the update, applied it. *angel harps play* And everything now works just dandy.


In all honesty, I said "Update Nero? Hah! Ya-sure, that's gonna work...all this crap I tried didn't help...like this will!" *grudgingly goes to Nero's site* Guess what? It did. )

Thanks, MechBgon, for the suggestion.

I really hope this helps someone. Good luck.

ps
Side note: the onboard NForce audio is just as versatile, configurable and SOUNDS AS GOOD IF NOT BETTER than my SBLive! X-Gamer. And NO crappy Creative drivers to deal with. The onboard sound rocks. I have no PCI cards in this box!

Good luck everyone.

 

[ElFenix]

actually i was gonna suggest that because nero wasn't launching for me (it had been... i'm not sure what screwed it up). the patch fixed it, but i saw that you had a different prob.

 

[BD231]

Why sticky when the very first thing anyone should do with a software compatibility issue on new hardware is update? That's the VERY first thing I would do, as I'm sure there should be nothing wrong with the hardware(or I'm just to lazy to do anything else ). Either way this Bus problem has come up in WindowsXP/2K in the past, the only solution was to wait for nero to fix it or install special ASPI layers (that never worked for me). When XP came out Nero and Easy CD Creator 5 didn't even work in most cases, Nero 55100 has been out for some time now, always check for updates.

 

[mechBgon]

angel harps... LOL! You're welcome

As I mentioned, I had the analogous problem with my DirectCD3/EZ CD Creator 4... after installation, Win2000 would reach the desktop screen and WHAMO it would reboot, over and over. I had to boot in Safe Mode and apply a lil' patch, and angel harps played for me as well So... been there, done that, took notes and adapted them. (edit: my issue wasn't on an 8RDA+, by the way)

I see TCWO has the 8RDA+ in stock again for $108 shipped here if anyone was teetering on the brink of buying one.

 

[Insane3D]

This problem is also Win2K specific I believe. In XP, the only problem you will have with Nero is the burning process will quit with a "SCSI Command Aborted" message. This will only happen if you use the non-WHQL "SW IDE Performance Drivers".

The driver pack from Nvidia is apparently different for Win2K and does not include any IDE drivers, unlike the XP driver pack that includes two.

Anyways...glad to hear it's all working out for you Michael.

 

[MichaelD]

Hey guys,

BD231...I dunno what to say...as many times as I've upgraded, I've never run into anything as perplexing as this. I guess you're just more experienced than I am. But hey man, I'm drinking milk, and someday I'm gonna be big and strong and smart like you. Then watch out! I was just stumped on this one and when a simple patch fixed the whole damn thing...well, I banged my head off the wall for a minute then I went and got another drink and all was well. I only suggested the sticky b/c I know many people (like I did last week) are taking the $100+ plunge and buying this mobo, AND, 99% of everyone out there uses Nero...just trying to help, not pat myself on the back. Technically, Mech fixed this, not I.

Insane3D and MechBgon, you guys are seriously major assets to this forum. I peruse a lot of threads and you help everyone. Speaking for the mildly technically-challenged; thank you.

It's working quite well. The software (all of it) is running great. Burning CD-to-CD seems slightly slower b/c I have the HD and the DVD on the same channel...but that may be just in my head. I haven't (nor will I) take a stopwatch to it. Just seems slightly slower. But heck, what's the diff b/t taking, say, 2:30 vs? 2:47 to copy a CD, you know?

I bought one of the "Holy Grail" XP2100s' (B TBred) from Newegg last week. Should be here Tuesday. I can't wait. We'll start at 2.2GHz and see where we can go from there. Thanks for your help.

 

[Insane3D]

Good to hear it's working well for you. If you still are having IDE cable length issus, SVC has a sale on rounded IDE cables now. You can get a nice 24", dual device, silver IDE cable for ~$4. I have my 8RDA+ in a Chieftec "Dragon" (Antec 1040 clone) and I use the silver 24" IDE cable for my CDRW and DVD. They are both on the secondary IDE and the CDRW is at the very top of the case, and the DVD is two slots down. The 24" cable works great and gives you room to spare.


Also, the offer still stands if you want some pointers on bios settings when you get your 2100+...just drop me a PM.

 

[MichaelD]

Thanks Insane3D.

Actually, I had some regular beige-colored rounded cables I had bought about a year ago, but wasn't using. They are about 2" longer than regular flat IDE cables. (why, I dunno, but they are.) That did the trick. I'm so glad I wasted money on the rounded cables a year ago when I was desperate to drop my case temp by 1C.

LOL!!!

Right now, the inside of my case is a mess. (AFA my standards go.) I like everything ziptied out of the way. Currently, the cabels "dangle" more than I'd like, but the mobo will have to come out when I do the CPU swap. (can't even SEE the clip on the AX-7 w/the mobo in the case )

Oh, and I will be hitting you up for pointers...I took a look in the memory screen section of the BIOS and it's very different from what I'm used to.

Currently, with the default "Optimal" settings, my SANDRA memory scores with the Crucial PC2700 are 2475/2295, which is WAY faster than it was on the Epox 8K5A2+.

I am digging the NForce board, big time.

 

[HendrixFan]

When I got my Sony DRU500A DVD+R drive, the burning software that came with it was a joke. Nero wouldnt allow me to burn DVDs, but sure enough the newest version they had at the time supported DVD burning. Picked that up, updated, and everything is peachy.

Nero certainly is the best burning software, and I think is usually worth updating even if you dont have hardware problems.

 

[MichaelD]

Bump for the Sunday night browsing crowd. HTH.

 

[BD231]

I think these nero problems should be added to the F.A.Q. if anything, certainly can be a tough fix when you don't know what's up.

 

[MichaelD]

Originally posted by: BD231
I think these nero problems should be added to the F.A.Q. if anything, certainly can be a tough fix when you don't know what's up.

Thanks, and I agree. I pulled my hair out..what little is left, anyway, trying to get it right. I never would have considered a Nero update... I thought "it HAS to be hardware-related..."

 

[vexingv]

hmmm...i just got a "SCSI/IDE Command aborted" errror in the begining/middle of a burn about 20 min ago....i had burned a bunch of cd's before without a hitch (except went and added a liteon dvd drive today); tried the winxp burner and that didnt work either...i guess i'll have to "get" a newer version to see if it will correct (was using 5.5.9.9.)

 

[MichaelD]

Originally posted by: vexingv
hmmm...i just got a "SCSI/IDE Command aborted" errror in the begining/middle of a burn about 20 min ago....i had burned a bunch of cd's before without a hitch (except went and added a liteon dvd drive today); tried the winxp burner and that didnt work either...i guess i'll have to "get" a newer version to see if it will correct (was using 5.5.9.9.)

You should be entitled to a free update via Nero's website. Are all your drives jumpered correctly?

 

[Insane3D]

Originally posted by: vexingv
hmmm...i just got a "SCSI/IDE Command aborted" errror in the begining/middle of a burn about 20 min ago....i had burned a bunch of cd's before without a hitch (except went and added a liteon dvd drive today); tried the winxp burner and that didnt work either...i guess i'll have to "get" a newer version to see if it will correct (was using 5.5.9.9.)

Do you have the Nvidia "SW" performance IDE drivers intalled? If so, that is what is causing your problem and Nero will not work with them at this point. You need to install the WHQL IDE drivers instead in XP. From Nvidia's 2.0 XP driver pack download page..


IDE driver 2.70 In The Box WHQL <--- Nero works with this one, drives are not seen as SCSI by XP


IDE driver 3.07 Full Driver -- not WHQL <--- Nero will give you the "SCSI/IDE Sommand Aborted" message shortly after burning starts.

 

[mechBgon]

/me takes note of this

 

[beatle]

Though I haven't had this problem, I know the feeling when you fix something you've been agonizing over. It's great! Good work.

 

[vexingv]

installed nero 5510 and whql ide drivers...burned 2 cds fine

we should get a sticky for this!

 

[IPLaw]

I have similar problems with both nero and ezcd not working on my NF7 under W2K. Is anyone aware of a fix? The W2K unified driver pack does NOT include an IDE driver, so I am stuck with the default MS generic IDE driver.

 

[mechBgon]

Originally posted by: IPLaw
I have similar problems with both nero and ezcd not working on my NF7 under W2K. Is anyone aware of a fix? The W2K unified driver pack does NOT include an IDE driver, so I am stuck with the default MS generic IDE driver.

Have you already added the latest patches/updates for the burner software and confirmed that the burner is running in DMA mode and not PIO mode? If not, try those next. My EZ CD Creator 4 Standard works with my nF2 board, although I do have to install a patch to make Windows and EZCD play nice, no matter what system I'm using.

 

[IPLaw]

Yup. All software - W2K, Nero, EZCD, up to date as of this minute. All drives DMA enabled and running. My burner is a TDK 12x10x32. Both Nero and EZCD fail to read the CDR drive properties correctly - both read and write speed are incorrect.

 

[MichaelD]

I read the thread title and thought: "Hmm...that looks familiar..." and then I saw my name. How cool is this?

IPlaw; why do you have TWO burn proggys running? One should be fine. That might be your problem; two proggys fighting for the IRQ/drive.

 

[IPLaw]

They are not both running in the sense that neither have memory resident programs (I have no CD-RW software installed whatsoever). At first I had just nero installed, and it flaked. I then installed EZCD, and it flaked. I never had both running at the same time.

I wonder why there is no separate IDE driver for W2K as there is for WinXP?

 

[MichaelD]

Not saying anyone else is incorrect, but here's my configuration and what I did. You're probably expecting a bigass list, right? Nope.

8RDA+ (version 1...or whatever the very first one is...it's got the bios W/O the CPU health displayed on boot)
1 WD 8mb 80GB HD (Primary Master)
LiteOn LTD-163 DVD (Primary Slave)
LiteOn 40x12x48 CDRW (Secondary Master)
1 512mb stick Corsair XMS3200 CAS2 (in slot closest to CPU..I think that's #1, IIRC)
XP2100 B TBred @ 2.17GHz (12x180@1.700v)
Antec Trupower 430 PS


W2KSP3 w/all updates/fixes/patches
Nero 5.7XXX upgraded on the website to 5.10

Like you, I had DMA enabled, drives jumpered correctly, tried different cables, etc. What fixed it was updating Nero. That's it. Sorry if this doesn't work for you. I tried.

 

[IPLaw]

Here is what Nero spat at me: The refernce to 'SCSI' seems strange:


Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 6/25/2002 5:34:54 PM
Nero Version: 5.5.10.7
Recorder: <TDK CDRW121032> Version: 1.08 - HA 1 TA 0 - 5.5.10.7
Adapter driver: <atapi> HA 1
Drive buffer : 5645kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TDK CDRW121032> Version: 1.08 - HA 1 TA 0 - 5.5.10.7
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 54610H6 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TDK CDRW121032 atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 307MB (314752kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

24.2.2003
Audio CD
11:47:41 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1620
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 04:54.00, Pause frames: 150, Filters: 0, Name: '80's - Michael Jackson - Billie Jean.mp3'.
Track 02: Length: 02:35.26, Pause frames: 150, Filters: 0, Name: 'American Idol - 2002-08-27 - Kelly Clarkson - Without you.mp3'.
Track 03: Length: 01:37.58, Pause frames: 150, Filters: 0, Name: 'american idol - kelly clarkson - i surrender.mp3'.
Track 04: Length: 02:37.62, Pause frames: 150, Filters: 0, Name: 'Beastie Boys - Brass Monkey.mp3'.
Track 05: Length: 04:07.73, Pause frames: 150, Filters: 0, Name: 'Creed - What's This Life For.mp3'.
Track 06: Length: 05:02.33, Pause frames: 150, Filters: 0, Name: 'Creed-One.mp3'.
Track 07: Length: 03:57.41, Pause frames: 150, Filters: 0, Name: 'Elton John - Candle In The Wind.mp3'.
Track 08: Length: 06:15.12, Pause frames: 150, Filters: 0, Name: 'Elton John - Tiny Dancer.mp3'.
Track 09: Length: 04:08.14, Pause frames: 150, Filters: 0, Name: 'John Mayer - Room for Squares - 04 - Your Body Is a Wonderland.mp3'.
Track 10: Length: 03:59.46, Pause frames: 150, Filters: 0, Name: 'Kylie Minogue - 02 - Love At First Sight.mp3'.
Track 11: Length: 03:49.71, Pause frames: 150, Filters: 0, Name: 'Kylie Minogue - Can't Get You Out Of My Head.mp3'.
Track 12: Length: 04:54.04, Pause frames: 150, Filters: 0, Name: 'Michael Jackson - Billy Jean.mp3'.
Track 13: Length: 04:10.64, Pause frames: 150, Filters: 0, Name: 'pm dawn - (i'd) die without you.mp3'.
Track 14: Length: 04:11.41, Pause frames: 150, Filters: 0, Name: 'pm dawn - set adrift on a memory bliss.mp3'.
Track 15: Length: 05:20.48, Pause frames: 150, Filters: 0, Name: 'UB40 - Red Red Wine 80's .mp3'.
Track 16: Length: 03:46.63, Pause frames: 150, Filters: 0, Name: 'Unwritten Law - Seeing Red.mp3'.
Total size: 66:01.56

11:47:41 PM #2 Phase 90 File dlgbrnst.cpp, Line 1653
Buffer Underrun Protection activated

11:47:41 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

11:47:41 PM #4 Text 0 File Writer.cpp, Line 123
Writer TDK CDRW121032 running

11:47:41 PM #5 Text 0 File Burncd.cpp, Line 3811
Turn on Disc-At-Once, using CD-R/RW media

11:47:41 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (original item values)
0: TRM_AUDIO_NOPRE (80's - Michael Jackson - Billie Jean.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 22050 (22050) = #22050/4:54.0
relocatable, CD pos for caching/writing not required/not required, no patch infos
1: TRM_AUDIO_NOPRE (American Idol - 2002-08-27 - Kelly Clarkson - Without you.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 11651 (11651) = #11651/2:35.26
relocatable, CD pos for caching/writing not required/not required, no patch infos
2: TRM_AUDIO_NOPRE (american idol - kelly clarkson - i surrender.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 7333 (7333) = #7333/1:37.58
relocatable, CD pos for caching/writing not required/not required, no patch infos
3: TRM_AUDIO_NOPRE (Beastie Boys - Brass Monkey.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 11837 (11837) = #11837/2:37.62
relocatable, CD pos for caching/writing not required/not required, no patch infos
4: TRM_AUDIO_NOPRE (Creed - What's This Life For.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18598 (18598) = #18598/4:7.73
relocatable, CD pos for caching/writing not required/not required, no patch infos
5: TRM_AUDIO_NOPRE (Creed-One.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 22683 (22683) = #22683/5:2.33
relocatable, CD pos for caching/writing not required/not required, no patch infos
6: TRM_AUDIO_NOPRE (Elton John - Candle In The Wind.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17816 (17816) = #17816/3:57.41
relocatable, CD pos for caching/writing not required/not required, no patch infos
7: TRM_AUDIO_NOPRE (Elton John - Tiny Dancer.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 28137 (28137) = #28137/6:15.12
relocatable, CD pos for caching/writing not required/not required, no patch infos
8: TRM_AUDIO_NOPRE (John Mayer - Room for Squares - 04 - Your Body Is a Wonderland.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18614 (18614) = #18614/4:8.14
relocatable, CD pos for caching/writing not required/not required, no patch infos
9: TRM_AUDIO_NOPRE (Kylie Minogue - 02 - Love At First Sight.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17971 (17971) = #17971/3:59.46
relocatable, CD pos for caching/writing not required/not required, no patch infos
10: TRM_AUDIO_NOPRE (Kylie Minogue - Can't Get You Out Of My Head.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17246 (17246) = #17246/3:49.71
relocatable, CD pos for caching/writing not required/not required, no patch infos
11: TRM_AUDIO_NOPRE (Michael Jackson - Billy Jean.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 22054 (22054) = #22054/4:54.4
relocatable, CD pos for caching/writing not required/not required, no patch infos
12: TRM_AUDIO_NOPRE (pm dawn - (i'd) die without you.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18814 (18814) = #18814/4:10.64
relocatable, CD pos for caching/writing not required/not required, no patch infos
13: TRM_AUDIO_NOPRE (pm dawn - set adrift on a memory bliss.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18866 (18866) = #18866/4:11.41
relocatable, CD pos for caching/writing not required/not required, no patch infos
14: TRM_AUDIO_NOPRE (UB40 - Red Red Wine 80's .mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 24048 (24048) = #24048/5:20.48
relocatable, CD pos for caching/writing not required/not required, no patch infos
15: TRM_AUDIO_NOPRE (Unwritten Law - Seeing Red.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17013 (17013) = #17013/3:46.63
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

11:47:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 438164 (97:24.14)
Last address to be written: 296980 (66:01.55)

11:47:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE

11:47:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 1452
Recorder: TDK CDRW121032;
CDR code: 00 00 00 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 0F (LI 97:24.15), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:47:42 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 822
Prepare recorder TDK CDRW121032 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 16:
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 0 352800 52214400
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 52214400 52567200 79970352
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 79970352 80323152 97570368
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 97570368 97923168 125763792
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 125763792 126116592 169859088
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 169859088 170211888 223562304
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 223562304 223915104 265818336
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 265818336 266171136 332349360
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 332349360 332702160 376482288
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 376482288 376835088 419102880
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 419102880 419455680 460018272
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 460018272 460371072 512242080
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 512242080 512594880 556845408
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 556845408 557198208 601571040
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 601571040 601923840 658484736
TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 658484736 658837536 698852112

11:47:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (80's - Michael Jackson - Billie Jean.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 22050 (22050) = #22050/4:54.0
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 22050 blocks [TDK CDRW121032 ]
1: TRM_AUDIO_NOPRE (American Idol - 2002-08-27 - Kelly Clarkson - Without you.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 11651 (11651) = #11651/2:35.26
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11651 blocks [TDK CDRW121032 ]
2: TRM_AUDIO_NOPRE (american idol - kelly clarkson - i surrender.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 7333 (7333) = #7333/1:37.58
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 7333 blocks [TDK CDRW121032 ]
3: TRM_AUDIO_NOPRE (Beastie Boys - Brass Monkey.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 11837 (11837) = #11837/2:37.62
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11837 blocks [TDK CDRW121032 ]
4: TRM_AUDIO_NOPRE (Creed - What's This Life For.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18598 (18598) = #18598/4:7.73
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18598 blocks [TDK CDRW121032 ]
5: TRM_AUDIO_NOPRE (Creed-One.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 22683 (22683) = #22683/5:2.33
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 22683 blocks [TDK CDRW121032 ]
6: TRM_AUDIO_NOPRE (Elton John - Candle In The Wind.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17816 (17816) = #17816/3:57.41
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17816 blocks [TDK CDRW121032 ]
7: TRM_AUDIO_NOPRE (Elton John - Tiny Dancer.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 28137 (28137) = #28137/6:15.12
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 28137 blocks [TDK CDRW121032 ]
8: TRM_AUDIO_NOPRE (John Mayer - Room for Squares - 04 - Your Body Is a Wonderland.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18614 (18614) = #18614/4:8.14
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18614 blocks [TDK CDRW121032 ]
9: TRM_AUDIO_NOPRE (Kylie Minogue - 02 - Love At First Sight.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17971 (17971) = #17971/3:59.46
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17971 blocks [TDK CDRW121032 ]
10: TRM_AUDIO_NOPRE (Kylie Minogue - Can't Get You Out Of My Head.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17246 (17246) = #17246/3:49.71
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17246 blocks [TDK CDRW121032 ]
11: TRM_AUDIO_NOPRE (Michael Jackson - Billy Jean.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 22054 (22054) = #22054/4:54.4
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 22054 blocks [TDK CDRW121032 ]
12: TRM_AUDIO_NOPRE (pm dawn - (i'd) die without you.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18814 (18814) = #18814/4:10.64
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18814 blocks [TDK CDRW121032 ]
13: TRM_AUDIO_NOPRE (pm dawn - set adrift on a memory bliss.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 18866 (18866) = #18866/4:11.41
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18866 blocks [TDK CDRW121032 ]
14: TRM_AUDIO_NOPRE (UB40 - Red Red Wine 80's .mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 24048 (24048) = #24048/5:20.48
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 24048 blocks [TDK CDRW121032 ]
15: TRM_AUDIO_NOPRE (Unwritten Law - Seeing Red.mp3)
2 indices, index0 (150) not provided
original CD pos #0 + 17013 (17013) = #17013/3:46.63
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17013 blocks [TDK CDRW121032 ]
--------------------------------------------------------------

11:47:42 PM #12 Phase 36 File dlgbrnst.cpp, Line 1653
Burn process started at 12x (1,800 KB/s)

11:47:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0

11:47:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #22200

11:47:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 2 (relocatable, no CD pos, no patch infos, orig at #0): write at #34001

11:47:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 3 (relocatable, no CD pos, no patch infos, orig at #0): write at #41484

11:47:42 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 4 (relocatable, no CD pos, no patch infos, orig at #0): write at #53471

11:47:42 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 5 (relocatable, no CD pos, no patch infos, orig at #0): write at #72219

11:47:42 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 6 (relocatable, no CD pos, no patch infos, orig at #0): write at #95052

11:47:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 7 (relocatable, no CD pos, no patch infos, orig at #0): write at #113018

11:47:42 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 8 (relocatable, no CD pos, no patch infos, orig at #0): write at #141305

11:47:42 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 9 (relocatable, no CD pos, no patch infos, orig at #0): write at #160069

11:47:42 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 10 (relocatable, no CD pos, no patch infos, orig at #0): write at #178190

11:47:42 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 11 (relocatable, no CD pos, no patch infos, orig at #0): write at #195586

11:47:42 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 12 (relocatable, no CD pos, no patch infos, orig at #0): write at #217790

11:47:42 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 13 (relocatable, no CD pos, no patch infos, orig at #0): write at #236754

11:47:42 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 14 (relocatable, no CD pos, no patch infos, orig at #0): write at #255770

11:47:42 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 15 (relocatable, no CD pos, no patch infos, orig at #0): write at #279968

11:47:42 PM #29 Text 0 File Mmc.cpp, Line 12864
StartDAO : CD-Text - On

11:47:42 PM #30 Text 0 File Mmc.cpp, Line 17311
Set BUFE: supported -> ON

11:47:42 PM #31 Text 0 File Mmc.cpp, Line 13124
CueData, Len=272
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 00 00 00 04 38 00
21 02 01 00 00 04 3a 00
21 03 00 00 00 07 21 1a
21 03 01 00 00 07 23 1a
21 04 00 00 00 09 0d 09
21 04 01 00 00 09 0f 09
21 05 00 00 00 0b 34 47
21 05 01 00 00 0b 36 47
21 06 00 00 00 10 02 45
21 06 01 00 00 10 04 45
21 07 00 00 00 15 07 1b
21 07 01 00 00 15 09 1b
21 08 00 00 00 19 06 44
21 08 01 00 00 19 08 44
21 09 00 00 00 1f 18 05
21 09 01 00 00 1f 1a 05
21 0a 00 00 00 23 22 13
21 0a 01 00 00 23 24 13
21 0b 00 00 00 27 23 41
21 0b 01 00 00 27 25 41
21 0c 00 00 00 2b 1b 3d
21 0c 01 00 00 2b 1d 3d
21 0d 00 00 00 30 17 41
21 0d 01 00 00 30 19 41
21 0e 00 00 00 34 24 36
21 0e 01 00 00 34 26 36
21 0f 00 00 00 38 32 14
21 0f 01 00 00 38 34 14
21 10 00 00 00 3e 0c 44
21 10 01 00 00 3e 0e 44
01 aa 01 01 00 42 01 38

11:47:46 PM #32 SCSI -1066 File Cdrdrv.cpp, Line 1402
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03820000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xF9 0x21 0x9A 0x00 0x02 0xAA 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

11:47:46 PM #33 MMC -1066 File Writer.cpp, Line 331
Invalid field in command

11:47:50 PM #34 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

11:47:50 PM #35 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

11:47:50 PM #36 Phase 38 File dlgbrnst.cpp, Line 1653
Burn process failed at 12x (1,800 KB/s)

11:47:50 PM #37 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.00.2195.5376, size=86704 bytes, created 7/22/2002 2:05:04 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)