• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Flat Spots

Status
Not open for further replies.

TheUnk

Golden Member
Suggestions on how to prevent flat tire spots on car stored in cold garage for 5 months?

If I do nothing, will they eventually get round again after driving it around for a while?
 
probably nothing to do but move it occasionally if it's a classic car unless you put it up on stands.

if it's a modern car with radial tires, they should go back to normal after some driving.
 
Inflate to sidewall; move car occasionally. I've parked vehicles OUTSIDE, IN THE SUN for at least 6 months at a time and found no such flat spots. Flat spots can be a problem, but the easiest way to avoid them is to raise the tire pressure. Since you won't be driving the vehicle, inflating them maybe even 20 PSI above sidewall will be just fine to ensure that you don't get any flat spots.
 
Fuck me.

facepalm.jpg
 
Inflate to sidewall; move car occasionally. I've parked vehicles OUTSIDE, IN THE SUN for at least 6 months at a time and found no such flat spots. Flat spots can be a problem, but the easiest way to avoid them is to raise the tire pressure. Since you won't be driving the vehicle, inflating them maybe even 20 PSI above sidewall will be just fine to ensure that you don't get any flat spots.

Inflating to sidewall will cure your acne too.
 
Inflate to sidewall; move car occasionally. I've parked vehicles OUTSIDE, IN THE SUN for at least 6 months at a time and found no such flat spots. Flat spots can be a problem, but the easiest way to avoid them is to raise the tire pressure. Since you won't be driving the vehicle, inflating them maybe even 20 PSI above sidewall will be just fine to ensure that you don't get any flat spots.

That's just about the strangest advice I've ever seen given here. I'd say not to worry about the tires at all, a ceased muffler bearing is a much bigger concern.
 
erm, fleabag is actually right in this respect. i'd leave the tires at about 50psi.

that's what many automakers do at the factory. i've personally seen cars sit for 2-3 months on a dealer lot without getting PDI'd, and the tires are fine.
 
Status
Not open for further replies.
Back
Top