Fixed!

[razor2025]

Ok.. fixed now. Thanks for all the help

 

[Mem]

Did you try Driver Cleaner 2 from here? .Btw I would run the cab cleaner(in tools part of driver cleaner) first in safe mode then run driver cleaner after,full instructions in the readme file of DC2.

 

[Lawranch]

You may have an IRQ problem. My 9600 had a conflict with my Audigy 2 before I switched PCI slots. The Audigy 2 was fine with my Geforce 3.

 

[razor2025]

thanks for the advise. I'll try wiping out the driver files first. I think the Omega set might have made some rather stubborn file somewhere. As for IRQ conflict.. it would also prevent me from loading the card using 3.2.

 

[sandorski]

Check your Hardware configuration to see if the 7500 is still listed. If it is, uninstall drivers/Control Panel, the 7500 and 9600, then restart. Re-install drivers/control panel after Windows finds the 9600. Don't know if that's your problem or not, I had that happen to me though when I recently upgraded from a 8500LE to 9600Pro.

 

[razor2025]

okay.. I've tried the driver cleaner, but it still refused to be recognized, unless I use the stock Cat 3.2 driver.

 

[Jackman]

Maybe.........you didn't install both control panel & matching driver. Control panels are matched to their own driver. just a suggestion.