Originally posted by: ironwing
Only advice I can offer is make sure the capacitor is discharged before you mess with it.
The capacitor will be the really heavy thing in there.
Originally posted by: Zolty
Originally posted by: ironwing
Only advice I can offer is make sure the capacitor is discharged before you mess with it.
The capacitor will be the really heavy thing in there.
the human tounge dischanges capacitors just fine![]()
Originally posted by: Squisher
Microwaves need to be tested for leakage after repairs. That is why they tell you to take it to a pro.
Well... they could...Originally posted by: SMOGZINN
Originally posted by: Squisher
Microwaves need to be tested for leakage after repairs. That is why they tell you to take it to a pro.
:roll: Microwaves don't leak radiation, that is a myth. Microwaves are safe. There is no need to test microwaves for anything other then normal electrical safty issues.
Originally posted by: SMOGZINN
Originally posted by: Squisher
Microwaves need to be tested for leakage after repairs. That is why they tell you to take it to a pro.
:roll: Microwaves don't leak radiation, that is a myth. Microwaves are safe. There is no need to test microwaves for anything other then normal electrical safty issues.
It is impossible for microwaves to leak microwave radiation unless there is a LARGE breach in the casing/door.Originally posted by: AmdEmAll
Originally posted by: SMOGZINN
Originally posted by: Squisher
Microwaves need to be tested for leakage after repairs. That is why they tell you to take it to a pro.
:roll: Microwaves don't leak radiation, that is a myth. Microwaves are safe. There is no need to test microwaves for anything other then normal electrical safty issues.
WRONG
Originally posted by: AmdEmAll
Originally posted by: SMOGZINN
Originally posted by: Squisher
Microwaves need to be tested for leakage after repairs. That is why they tell you to take it to a pro.
:roll: Microwaves don't leak radiation, that is a myth. Microwaves are safe. There is no need to test microwaves for anything other then normal electrical safty issues.
WRONG
Originally posted by: Eli
Well... they could...Originally posted by: SMOGZINN
Originally posted by: Squisher
Microwaves need to be tested for leakage after repairs. That is why they tell you to take it to a pro.
:roll: Microwaves don't leak radiation, that is a myth. Microwaves are safe. There is no need to test microwaves for anything other then normal electrical safty issues.
But you would have to do something braindead like bypass the door interlock and run it with the door open or something.
Originally posted by: Eli
It is impossible for microwaves to leak microwave radiation unless there is a LARGE breach in the casing/door.Originally posted by: AmdEmAll
Originally posted by: SMOGZINN
Originally posted by: Squisher
Microwaves need to be tested for leakage after repairs. That is why they tell you to take it to a pro.
:roll: Microwaves don't leak radiation, that is a myth. Microwaves are safe. There is no need to test microwaves for anything other then normal electrical safty issues.
WRONG
The wavelength is rather large.
Originally posted by: Slickone
Sorry, hadn't had time to reply until now. I wouldn't bother fixing one normally, but it was part of a pallet of stuff I bought at an auction.
It's a Goldstar MAB745W and new in the box, but won't do anything. I figure it could be a fuse.
http://img203.imageshack.us/img203/5306/microwave11pi.jpg">Here's</a> a pic of the inside. What I need to know is where to unplug the high voltage so I don't get shocked. The high voltage in the pic is on the magnetron, correct? HV transformer is underneath? What would you unplug? Or is that not necessary? If it's been sitting for a couple months, wouldn't the capacitor be discharged?
Here's another pic. Is a fuse in the yellow cylinder, or the black terminal above that?
I was waiting for this reply, and thanks but I am asking questions before doing anything. I'm always cautious opening up TV's as well. Besides, again this microwave has been sitting for a month since I plugged it in (though it never ran), and I've been told caps dissipate their charge after a period of time. And I don't see why I couldn't discharge it myself. Else if I stay away from the transformer, what could happen?Originally posted by: C6FT7
IF you are asking questions like this please STOP.
No offence, but you have NO BUSINESS MESSING AROUND inside of a microwave oven. 2000 volts at half an amp WILL KILL YOU if you touch it. Do you want to die? Go right ahead and plug away.