petrusbroder
Elite Member
- Nov 28, 2004
- 13,347
- 1,154
- 126
Hmmm,. I went to bed just before the discussion started. I also had a hard time to decide if Jim meant the dos-file naming rule or the speed of certain cars ... I like the Ninja. OTOH, I like the Official Castle Transportation too ...
Just to comment the topic --- on EOC I have produced - for the first time in my life - more than 12 000 points in one day. http://folding.extremeovercloc...ummary.php?s=&u=160496
Of course I have not - it is an artefact due to the probs with the stats ...
Just to comment the topic --- on EOC I have produced - for the first time in my life - more than 12 000 points in one day. http://folding.extremeovercloc...ummary.php?s=&u=160496
Of course I have not - it is an artefact due to the probs with the stats ...
- May 13, 2003
- 13,704
- 7
- 81
Originally posted by: caferace
Go buy yourself a 2008 Ninja 250 and thank me later.
http://www.buykawasaki.com/Products/Detail.aspx?id=263
-jim
p.s... LizardMonsters dig Ninja's
ROFL. Are you crazy? These college kids in central Texas can barely drive when it's dry. They get just plain stupid when it rains. I'm afraid to drive my car out there, and you want me to get on a motorcycle?
(truth me told, I am afraid to get a bike, else I would have, because it would be wonderful for my short distance to work).
Rudy Toody
Diamond Member
- Sep 30, 2006
- 4,267
- 421
- 126
- May 13, 2003
- 13,704
- 7
- 81
I wonder how many dual quad core machines I could build with that, and for how many months I could power them.
Originally posted by: GLeeM
I still can't get used to putting a space in a filename
I can't use spaces either, and I'm only 22! :laugh:
I now have the chasis and engine assembly completed on my Cobra. Need to go get more paint from the hobby store tomorrow!
- May 13, 2003
- 13,704
- 7
- 81
Considering it's a 13 minute walk, no, not really. The fear of getting hit from some dumb ass that can't figure out that they need to check their blind spot when they change lanes will keep me from ever getting a motorcycle. Even though it is a sexy bike.
biodoc
Diamond Member
- Dec 29, 2005
- 6,333
- 2,243
- 136
Originally posted by: GenHoth
Originally posted by: GLeeM
I still can't get used to putting a space in a filename
I can't use spaces either, and I'm only 22! :laugh:
I now have the chasis and engine assembly completed on my Cobra. Need to go get more paint from the hobby store tomorrow!
I don't either. Years of using unix then linux is the source of my habit.
I still use underscores instead of spaces.
we need a :coffee; icon for early morning posts!
maybe :bagel; or
oughnut; too!
biodoc
Diamond Member
- Dec 29, 2005
- 6,333
- 2,243
- 136
Originally posted by: caferace
Originally posted by: biodoc
...I traded in my 300M for a toyota Prius
Prius' are the Volvo's of the double-ought's. :laugh:
-jim
hic. :beer:
Never understood why volvos deserved "green car' status
Still see 240D's around spewing copious amounts of black soot into the atmosphere
I never had any self control with a throttle so I was lucky to survive my youth experience with snowmobiles and motorcycles
A Prius is perfect for me
I'll change the topic a little:
First cruncher - HP pavilion / XP 3200+
It now resides at my father-in-laws and crunches no more
First cruncher - HP pavilion / XP 3200+
It now resides at my father-in-laws and crunches no more
Originally posted by: caferace
GLeeM wins the truncated prize!
Man, and I thought there were some old timers here.
PRIZEON~.TXT awarded.
-jim
What???
and no prize from the FORD guy for knowing the '65 'Stang did 0 - 60 in 8.3?? Jeez. Where's the love? :laugh: (the fact alone that I know that, dates me.
)
- Oct 25, 2001
- 7,649
- 0
- 0
WoW :shocked:
I hadn't even heard of this car. 250+ MPH..... AMAZING!
But speaking of speed...... FedEx says my brandy new soopoorDdooper heat sinks are to arrive today......
FINALLY, I get to do the playtime these PCs offer that convinced me to upgrade in the first place. (ThermalRight Ultima-90).
OK, so they're not 120's, but think about it.... An electronic hardware designer, on vacation with something to build and test (ad nauseum) and the ever present possibility of smoke... real, not imagined to keep it interesting.
My PPD is going to suffer a little (OK, maybe quite a bit) for the next day or two, but you can
knowing I'm in hog heaven!-Sid
Assimilator1
Elite Member
- Nov 4, 1999
- 24,152
- 517
- 126
An absolutely insane car the Vyeron!:Q ,16cyls & 4 turbos! lol
Sid
Prime95 is the 1st tool you need to use for overclocking & testing 1 component at a time.
I was going to give you the run down here but Anandtech covered the testing methology recently in this article.
Though they neglected to mention you should do a 24hr test afterwards to make sure it is really stable :roll: (1/2hr is a quick test) ,though running F@H afterwards is a better test still!.Oh & also don't bother running it for 1/2hr at a time between FSB steps ,that's overkill for a quick & dirty test ,just run it for 5mins ,if it passes then reboot & raise whichever speed you were fiddling with. LMk how you get on.
Quad pumped = quad data rate(QDR) which 4x the actual MHz.
As in DDR is Doulbe Date Rate (x2).
FSB is real FSB on Intel rigs , so the def FSB on a Q6600 is 266MHz & its quad pumped so it is effectivley 1066MHz. 1600=400MHz QDR
If you find you overclock is mbrd limited then (using ATs method linked above) you'll probably need to raise the NB voltage &/or maybe the VTT voltage.
Oh I finally got my Ultima 90 today , probably install it tomorrow.
So how do you lock affinities with the F@H SMP client?
FMC
Come get me!
( | )
heheh
Btw no such thing as a quad core P3 ,do you mean quad CPU?
,16cyls & 4 turbos! lolSid
Prime95 is the 1st tool you need to use for overclocking & testing 1 component at a time.
I was going to give you the run down here but Anandtech covered the testing methology recently in this article
. Though they neglected to mention you should do a 24hr test afterwards to make sure it is really stable :roll: (1/2hr is a quick test) ,though running F@H afterwards is a better test still!.Oh & also don't bother running it for 1/2hr at a time between FSB steps ,that's overkill for a quick & dirty test
,just run it for 5mins ,if it passes then reboot & raise whichever speed you were fiddling with. LMk how you get on.Quad pumped = quad data rate(QDR) which 4x the actual MHz.
As in DDR is Doulbe Date Rate (x2).
FSB is real FSB on Intel rigs , so the def FSB on a Q6600 is 266MHz & its quad pumped so it is effectivley 1066MHz. 1600=400MHz QDR
If you find you overclock is mbrd limited then (using ATs method linked above) you'll probably need to raise the NB voltage &/or maybe the VTT voltage.
Oh I finally got my Ultima 90 today
, probably install it tomorrow.So how do you lock affinities with the F@H SMP client?
FMC
Come get me!
( | )
heheh
Btw no such thing as a quad core P3 ,do you mean quad CPU?
Assimilator1
Elite Member
- Nov 4, 1999
- 24,152
- 517
- 126
Yea I saw that , so is it worth running with 1 SMP client? or is it only worth doing with 2 SMP clients on quads?
- Oct 25, 2001
- 7,649
- 0
- 0
I didn't see any difference on my X2 machines running a single SMP client. I went ahead and just took it off of them. It was the quads with two SMP clients (windowsXP) that I've had such a BIG increase in effeciency. (went from averaging ~15+ minutes per step to 12:20 per step)
-Sid
- May 13, 2003
- 13,704
- 7
- 81
Originally posted by: Assimilator1
FMC
Come get me!
( | )
heheh
Btw no such thing as a quad core P3 ,do you mean quad CPU?
Sorry. It is a dual processor P3, and each processor has HyperThreading.
Assimilator1
Elite Member
- Nov 4, 1999
- 24,152
- 517
- 126
lol no probs ,P3s don't have Hyperthreading either ,you mean P4s
What clock speed is it btw?
Sid
Ah I see ,thanks:thumbsup:
Btw I just had a look at my SMP client ,& its doing about 10mins 10-20sec/step.
And you're getting 12m20s/step on each SMP client? ,that's alot faster than my rig!:Q
What clock speed is it again?
What clock speed is it btw?
Sid
Ah I see ,thanks:thumbsup:
Btw I just had a look at my SMP client ,& its doing about 10mins 10-20sec/step.
And you're getting 12m20s/step on each SMP client? ,that's alot faster than my rig!:Q
What clock speed is it again?
- May 13, 2003
- 13,704
- 7
- 81
Originally posted by: Assimilator1
lol no probs ,P3s don't have Hyperthreading either ,you mean P4s
What clock speed is it btw?
Hmmm. I know four cores show up in windows (not sure if they are logical or actual). If it isn't HT, then it might be a quad proc P3. I know they are 500MHz P3 Xeons though.
TRENDING THREADS
-
Discussion Zen 5 Speculation (EPYC Turin and Strix Point/Granite Ridge - Ryzen 9000)- Started by DisEnchantment
- Replies: 25K
-
Discussion Intel Meteor, Arrow, Lunar & Panther Lakes Discussion Threads
- Started by Tigerick
- Replies: 21K
-
Discussion Intel current and future Lakes & Rapids thread- Started by TheF34RChannel
- Replies: 23K
-
-
Facebook
Twitter