e4500 budget Build + OC

[MountainKing]

Hi guys. Im building a budget PC for my friend and want to know if its possible to OC it a little on stock cooling...Say 200-400MHz...

Here are the specs:
CPU:E4500
RAM: Kingston DDR2 533/667MHz (2x1GB)
MOBO: Asrock Conroe 1333-d667 (Onboard Graphics)

http://www.asrock.com/mb/overview.asp?Model=ConRoe1333-D667%20R2.0&s=

Possible or not guys?
Can I OC it on 533MHz - Only a slight OC is wanted with stock cooling!
(Im asking because I have not used this board before)

 

[myocardia]

The E4x00 chips will all do 2.8-3.0 Ghz with the stock heatsink, possibly higher if you aren't anal about temps. Whether that AsRock gives you any trouble overclocking or not, I can't say for sure, but I doubt it. I can tell you that an E4500 would be my pick for the chip to pair with that motherboard, because of it's 11x multiplier (AsRocks don't seem to like high FSB's).

 

[MountainKing]

Thanks mate...Will the 533MHz Kingston memory be good enough for a slight OC?

 

[myocardia]

That RAM can handle 11x333= 3.66 Ghz, before you start overclocking the RAM.

 

[hans007]

the e4500 is m0 stepping unlike most e4300s and e4400s (There are m0 e4400s though) and from what i've read overclock higher.