dual channel DDR

[nick1985]

what slots do you need to have your ram in to run in dual channel? i always thought slot 2 and 3 was the best combination, but lately al i have been seeing is slot 1 and 3. does it matter?

 

[WhiteKnight77]

My RAM is in 2 and 3 for Dual Channel on the A7N8X mobo.

 

[Harabecw]

In my 865PE board it goes like this:
In order to get dual channel with 2 sticks -
1) 1 in slot 1, 1 in slot 3
2) 1 in slot 2, in slot 4

In order to get dual channel with 4 sticks -
1) put them all in (1, 2, 3, 4) 🙂

However, I have no idea how it goes in nVidia chipsets >_<

EDIT: I'm going by the manual 🙂

 

[MercenaryForHire]

Every board/chipset will be different. Some are nice enough to colour-code the slots, some aren't. So I'm going to go out on a limb here and say

RTFM 😀

- M4H

 

[Xenon14]

I have an Epox NFORCE 2, and I read that you need to have it in (2 or 3) and 1. (One of the two that are close to each other and in one that's farther away from the two).

 

[x3m]

www.8rdafaq.com

That's a great resource for anyone with a 8RDA or a NF7 motherboard! 🙂

Edit: oh - you had a a7n8x, but I think it's the same as on the nf7 or 8rda

 

[mechBgon]

Fill the middle slot last, on an A7N8X or A7N8X-Deluxe (avoids confusion).

 

[nick1985]

so the 2 blue ones then is what i want? cuz thats how i have it and ive been seeing a lot of people with my board with slot 1 and 3. i was just wondering if it even makes a difference

 

[mechBgon]

The slots that sit close together are attached to one memory controller, and the "loner" slot is on the other. Put one module on each controller.

 

[nick1985]

Originally posted by: mechBgon
The slots that sit close together are attached to one memory controller, and the "loner" slot is on the other. Put one module on each controller.

so 1 and 3 and 2 and 3 doesnt make a difference?

 

[bgeh]

Originally posted by: nick1985

Originally posted by: mechBgon
The slots that sit close together are attached to one memory controller, and the "loner" slot is on the other. Put one module on each controller.

so 1 and 3 and 2 and 3 doesnt make a difference?

yup, doesn't make a difference

 

[mechBgon]

Press the Tab key at the logo screen from a cold start (so you can see the POST screen), and if you have the 1005 BIOS or later, it should say whether it's dual-channel or single-channel. If there are memory modules on both controllers, it has no choice but to run dual-channel, period.

Here's Asus' own blurb on the topic: blurb on the topic

 

[WhiteKnight77]

Originally posted by: WhiteKnight77
My RAM is in 2 and 3 for Dual Channel on the A7N8X mobo.

Slots 2 and 3 are the blue slots that are quoted in the blurb posted above.