CrystalMark 2004 Competition! Stress your System!

[chinkgai]

oh and with my old 4200+ i was gettin 43-44 load

and when i crank up the voltage even more, i get 42-43 load with the 4400+ and the air coming out becomes slightly, very slightly warm, so i know the temp sensor isnt "broken" since i've changed from air to water

 

[mwmorph]

why is my cpu listed asa 3300+ paris? My AMD64 is detected to have 64bit extensions so shouldnt it be a 3300+ AMD64? (besides, it says athalon 64 on the heatspreader.)

btw, it's S753 s it's 1 channel ram.

 

[Indyboy2]

here is my score 43535 im terrible at posting pictures???
Link http://pg.photos.yahoo.com/ph/indyboy58/detail?.dir=bc92&.dnm=a488.jpg&.src=ph

 

[MADMAX23]

ADDED Indyboy2, scores up to date!
Have a nice summer weekend guys!!

 

[rise]

need to get an x2 3800+ up there

10x265, 2x 1024 mushkin 2.5-3-3-8 @ 241mhz 56,095

 

[ElTorrente]

Here's ya go:

60895

Looks like the second best overall - I'm proud of my little rig. If I had a 1gb set of RAM instead of 2- I would probably make it to #1 in this contest, since I could probably drop my timings down a bit. My RAM is running great though- no complaints.

I wish we could include HDD scores in the contest.. I'd be #1 for sure..

 

[rise]

thats a nice score. i still have a little room left but certainly won't hit 60k.

 

[Markbnj]

Edited due to severe n00bishness...

Mark: 44403
ALU: 16552
FPU: 16769
MEM: 11082

 

[rise]

thats because you're only supposed to submit the first three tests. like this

 

[Markbnj]

Haha, dumb. Ok, now I get it.

 

[chinkgai]

Originally posted by: ElTorrente
Here's ya go:

60895

Looks like the second best overall - I'm proud of my little rig. If I had a 1gb set of RAM instead of 2- I would probably make it to #1 in this contest, since I could probably drop my timings down a bit. My RAM is running great though- no complaints.

I wish we could include HDD scores in the contest.. I'd be #1 for sure..

you wouldnt be number one, i can run this at 2.9ghz...same timings...muahahah...jes didnt ;P

 

[Gronich]

Originally posted by: chinkgai
new results for me from the 4400+

i got it prime stable at 2806, and i think i can get it prime stable at 2882 also, but i havent had time to run it more than a few hours at that speed. anyways here are the results with it at 2806:

crystalmark at 62211

and

dual prime torture test shot

thanks max

Can you explain why your Fibonacci figure is 20% higher than everybody when all your other figures tally with my system at the same speed?

 

[chinkgai]

i have a 4400+, which means 2x your cache

my ram is running at a higher fsb (255 vs ur 233) and tighter timings (2-2-2 vs ur 2.5-2-2)

 

[Ronin]

I couldn't handle not being in the Top 10, so...


49740

Limiting factors right now are the motherboard (it's an Xpress 200 mobo from MSI with extremely limited OCing options). RAM is at 2-3-3-7-1T, 210MHz. CPU @ 2520MHz

 

[Ronin]

And my single core offering (for now):

31449

RAM @ 2-2-2-5-1T @ 222MHz CPU @ 2.79GHz

 

[jim1976]

58067

Not bad at all, considering I have my memory(Mushkin Redline xp3500) running at 5/6 225(2-2-2-5) and not 1:1 (I could do 256 @ 2-2-2-5 with my Winchester 3200+) Dunno maybe it's the mem controller of my Toledo). Maybe Chingai or someone else can help me with this?
I can also ran @2.8 but I need to prime test it first and also I don't want to go at a higher vcore for now , so I kept my scores at 2.7(10x270).But I think my cpu can go much higher than what I am running now(2.9 at least)

Think I am on the top10 right?
Rig in sig

 

[MADMAX23]

Originally posted by: Markbnj
Edited due to severe n00bishness...

Mark: 44403
ALU: 16552
FPU: 16769
MEM: 11082

I need a pic please!

 

[MADMAX23]

Scores updated guys!!
I didn't think this thread was still in your minds...I'm happy to see that though!!
Have a nice day!!

 

[chinkgai]

you are not forgotten max

 

[chinkgai]

Originally posted by: jim1976
58067

Not bad at all, considering I have my memory(Mushkin Redline xp3500) running at 5/6 225(2-2-2-5) and not 1:1 (I could do 256 @ 2-2-2-5 with my Winchester 3200+) Dunno maybe it's the mem controller of my Toledo). Maybe Chingai or someone else can help me with this?
I can also ran @2.8 but I need to prime test it first and also I don't want to go at a higher vcore for now , so I kept my scores at 2.7(10x270).But I think my cpu can go much higher than what I am running now(2.9 at least)

Think I am on the top10 right?
Rig in sig

so...whats ur question?

 

[MADMAX23]

Thank you, chinkgai. You are very kind!

 

[chinkgai]

Originally posted by: Ronin
I couldn't handle not being in the Top 10, so...


49740

Limiting factors right now are the motherboard (it's an Xpress 200 mobo from MSI with extremely limited OCing options). RAM is at 2-3-3-7-1T, 210MHz. CPU @ 2520MHz

ur not!

 

[jim1976]

Originally posted by: chinkgai
so...whats ur question?

Thanks for taking the time m8 to ask

My problem is this:

Not bad at all, considering I have my memory(Mushkin Redline xp3500) running at 5/6 225(2-2-2-5) and not 1:1 (I could do 256 @ 2-2-2-5 with my Winchester 3200+) Dunno maybe it's the mem controller of my Toledo).

I mean what can cause my sticks to ran at such low fsb considering that I ran it in the past at 255-256 at 2-2-2-5 with my monster at o/c Winnie.

 

[chinkgai]

whats ur max for ur 4400 (fsb)?

basically...my point is if u are trying to run 11x255 (or 256) thats 2806 (or 2816)

at this speed, you probably need a pretty good voltage bump. x2's get real hot after a certain point and also lose stability cuz it gets too hot. if you dont have sufficient cooling, try 255 (or 256) with a lower multiplier...like 9 or 10

this takes the cpu out of the equation and leaves only the ram

i highly doubt ur cpu can run 2700mhz but wont go 250ish fsb, altho that MAY be possible. i just doubt thats the case. also, it might be harder to get the same results from single core to dual core...but u should still be within a few mhz

when i went from sckt 754 to 939...i lost like four mhz peak...ur going from single to dual core...so that may be a factor

 

[jim1976]

Originally posted by: chinkgai
whats ur max for ur 4400 (fsb)?

basically...my point is if u are trying to run 11x255 (or 256) thats 2806 (or 2816)

at this speed, you probably need a pretty good voltage bump. x2's get real hot after a certain point and also lose stability cuz it gets too hot. if you dont have sufficient cooling, try 255 (or 256) with a lower multiplier...like 9 or 10

this takes the cpu out of the equation and leaves only the ram

i highly doubt ur cpu can run 2700mhz but wont go 250ish fsb, altho that MAY be possible. i just doubt thats the case. also, it might be harder to get the same results from single core to dual core...but u should still be within a few mhz

when i went from sckt 754 to 939...i lost like four mhz peak...ur going from single to dual core...so that may be a factor

Well I didn't explain it thorougly. I meant what ram is capable of. My Toledo can go @2.8 with 10x280 or 11x255 w/o issues.(just haven't primed it yet) But I have to use a very low divider to ran with 2-2-2-5 as I want at 2.8GHz. I can't seem to get my ram to ran @ more than 227 with 2-2-2-5, while this wasn't the case by far with my winnie. I have a XP-90c for cooling with a tt cpu fan running@4300rpm. Idle temp is 39-40c and 55-56 max at load.
I mean why ram can't go higher than 227 with 2-2-2-5? We are not talkin about a small difference we are talkin about at least 25Mhz (255 2-2-2-5) compared to what they ran with my winnie.