• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Coppermine overclocking

B

Bcrow

Member
Hi i got a tyan tiger 100 with two retail p3-700's (CB0's). I get lockups when I overclock them to 933. I know its because of the voltage (mbmonitor reports both cpu's are running at 1.65v). Too low for 933 mhz. Which pins on the coppermine do I tape to enable 1.80v?

Config:
tyan tiger 100 rev f.
2 Retail P3-700 CBO
384 megs Crucial PC133 Cas 2
Leadtek geforce2 gts 64 mb
Diamond Fireport 40 dual
IBM 9LZX 9.1 GB UWSCSI
 
Sorry to say it's not just easy pin taping to get the voltage up on the coppermine. you will need to make one pin to be a logical 1 meaning it needs to have voltage. I basically gave up on it once I found that out.

Maybe you could sell both your cpu's to someone and buy pga versions and use a slocket to adjust the voltages.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top