Coppermine overclocking

[Bcrow]

Hi i got a tyan tiger 100 with two retail p3-700's (CB0's). I get lockups when I overclock them to 933. I know its because of the voltage (mbmonitor reports both cpu's are running at 1.65v). Too low for 933 mhz. Which pins on the coppermine do I tape to enable 1.80v?

Config:
tyan tiger 100 rev f.
2 Retail P3-700 CBO
384 megs Crucial PC133 Cas 2
Leadtek geforce2 gts 64 mb
Diamond Fireport 40 dual
IBM 9LZX 9.1 GB UWSCSI

 

[kyoshozx]

Sorry to say it's not just easy pin taping to get the voltage up on the coppermine. you will need to make one pin to be a logical 1 meaning it needs to have voltage. I basically gave up on it once I found that out.

Maybe you could sell both your cpu's to someone and buy pga versions and use a slocket to adjust the voltages.